From: 21cnbao@gmail.com (Barry Song)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync for atlas6
Date: Thu, 30 Jan 2014 13:54:24 +0800 [thread overview]
Message-ID: <1391061264-2162-1-git-send-email-21cnbao@gmail.com> (raw)
From: Rongjun Ying <rongjun.ying@csr.com>
USP0 has multiple functions, and has RX and TX frame sync signals, for some scenarios
like audio PCM, we don't need both of them. so here we add two possibilities for USP0
only holding one of TX and RX frame sync.
commit 8385af02bad only added this group for prima2, and missed atlas6. her this patch
fixes it.
Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
---
drivers/pinctrl/sirf/pinctrl-atlas6.c | 43 +++++++++++++++++++++++++++++++++
1 files changed, 43 insertions(+), 0 deletions(-)
diff --git a/drivers/pinctrl/sirf/pinctrl-atlas6.c b/drivers/pinctrl/sirf/pinctrl-atlas6.c
index 2b9f320..09211fb 100644
--- a/drivers/pinctrl/sirf/pinctrl-atlas6.c
+++ b/drivers/pinctrl/sirf/pinctrl-atlas6.c
@@ -529,6 +529,40 @@ static const struct sirfsoc_padmux usp0_padmux = {
static const unsigned usp0_pins[] = { 51, 52, 53, 54, 55 };
+static const struct sirfsoc_muxmask usp0_only_utfs_muxmask[] = {
+ {
+ .group = 1,
+ .mask = BIT(19) | BIT(20) | BIT(21) | BIT(22),
+ },
+};
+
+static const struct sirfsoc_padmux usp0_only_utfs_padmux = {
+ .muxmask_counts = ARRAY_SIZE(usp0_only_utfs_muxmask),
+ .muxmask = usp0_only_utfs_muxmask,
+ .ctrlreg = SIRFSOC_RSC_PIN_MUX,
+ .funcmask = BIT(1) | BIT(2) | BIT(6),
+ .funcval = 0,
+};
+
+static const unsigned usp0_only_utfs_pins[] = { 51, 52, 53, 54 };
+
+static const struct sirfsoc_muxmask usp0_only_urfs_muxmask[] = {
+ {
+ .group = 1,
+ .mask = BIT(19) | BIT(20) | BIT(21) | BIT(23),
+ },
+};
+
+static const struct sirfsoc_padmux usp0_only_urfs_padmux = {
+ .muxmask_counts = ARRAY_SIZE(usp0_only_urfs_muxmask),
+ .muxmask = usp0_only_urfs_muxmask,
+ .ctrlreg = SIRFSOC_RSC_PIN_MUX,
+ .funcmask = BIT(1) | BIT(2) | BIT(9),
+ .funcval = 0,
+};
+
+static const unsigned usp0_only_urfs_pins[] = { 51, 52, 53, 55 };
+
static const struct sirfsoc_muxmask usp0_uart_nostreamctrl_muxmask[] = {
{
.group = 1,
@@ -905,6 +939,8 @@ static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = {
SIRFSOC_PIN_GROUP("usp0grp", usp0_pins),
SIRFSOC_PIN_GROUP("usp0_uart_nostreamctrl_grp",
usp0_uart_nostreamctrl_pins),
+ SIRFSOC_PIN_GROUP("usp0_only_utfs_grp", usp0_only_utfs_pins),
+ SIRFSOC_PIN_GROUP("usp0_only_urfs_grp", usp0_only_urfs_pins),
SIRFSOC_PIN_GROUP("usp1grp", usp1_pins),
SIRFSOC_PIN_GROUP("usp1_uart_nostreamctrl_grp",
usp1_uart_nostreamctrl_pins),
@@ -953,6 +989,9 @@ static const char * const uart2_nostreamctrlgrp[] = { "uart2_nostreamctrlgrp" };
static const char * const usp0_uart_nostreamctrl_grp[] = {
"usp0_uart_nostreamctrl_grp" };
static const char * const usp0grp[] = { "usp0grp" };
+static const char * const usp0_only_utfs_grp[] = { "usp0_only_utfs_grp" };
+static const char * const usp0_only_urfs_grp[] = { "usp0_only_urfs_grp" };
+
static const char * const usp1grp[] = { "usp1grp" };
static const char * const usp1_uart_nostreamctrl_grp[] = {
"usp1_uart_nostreamctrl_grp" };
@@ -1003,6 +1042,10 @@ static const struct sirfsoc_pmx_func sirfsoc_pmx_functions[] = {
SIRFSOC_PMX_FUNCTION("usp0_uart_nostreamctrl",
usp0_uart_nostreamctrl_grp,
usp0_uart_nostreamctrl_padmux),
+ SIRFSOC_PMX_FUNCTION("usp0_only_utfs", usp0_only_utfs_grp,
+ usp0_only_utfs_padmux),
+ SIRFSOC_PMX_FUNCTION("usp0_only_urfs", usp0_only_urfs_grp,
+ usp0_only_urfs_padmux),
SIRFSOC_PMX_FUNCTION("usp1", usp1grp, usp1_padmux),
SIRFSOC_PMX_FUNCTION("usp1_uart_nostreamctrl",
usp1_uart_nostreamctrl_grp,
--
1.7.5.4
next reply other threads:[~2014-01-30 5:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-30 5:54 Barry Song [this message]
2014-02-04 20:49 ` [PATCH 1/2] pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync for atlas6 Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391061264-2162-1-git-send-email-21cnbao@gmail.com \
--to=21cnbao@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox