linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: adrienverge@gmail.com (Adrien Vergé)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 4/5] ARM CoreSight: ETM: Add address control support
Date: Thu, 30 Jan 2014 11:11:09 -0500	[thread overview]
Message-ID: <1391098270-8867-5-git-send-email-adrienverge@gmail.com> (raw)
In-Reply-To: <1391098270-8867-1-git-send-email-adrienverge@gmail.com>

In the same manner as for enabling tracing, an entry is created
in sysfs to set the address range that triggers tracing.

Signed-off-by: Adrien Verg? <adrienverge@gmail.com>
---
 arch/arm/kernel/etm.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 49 insertions(+), 3 deletions(-)

diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index b3e6713..fa42e32 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -44,6 +44,8 @@ struct tracectx {
 	struct device	*dev;
 	struct clk	*emu_clk;
 	struct mutex	mutex;
+	unsigned long	addrrange_start;
+	unsigned long	addrrange_end;
 };
 
 static struct tracectx tracer;
@@ -53,6 +55,13 @@ static inline bool trace_isrunning(struct tracectx *t)
 	return !!(t->flags & TRACER_RUNNING);
 }
 
+/*
+ * Setups ETM to trace only when:
+ *   - address between start and end
+ *     or address not between start and end (if exclude)
+ *   - trace executed instructions
+ *     or trace loads and stores (if data)
+ */
 static int etm_setup_address_range(struct tracectx *t, int n,
 		unsigned long start, unsigned long end, int exclude, int data)
 {
@@ -115,8 +124,8 @@ static int trace_start(struct tracectx *t)
 		return -EFAULT;
 	}
 
-	etm_setup_address_range(t, 1, (unsigned long)_stext,
-			(unsigned long)_etext, 0, 0);
+	etm_setup_address_range(t, 1, t->addrrange_start, t->addrrange_end,
+				0, 0);
 	etm_writel(t, 0, ETMR_TRACEENCTRL2);
 	etm_writel(t, 0, ETMR_TRACESSCTRL);
 	etm_writel(t, 0x6f, ETMR_TRACEENEVT);
@@ -530,6 +539,36 @@ static ssize_t trace_mode_store(struct device *dev,
 
 DEVICE_ATTR(trace_mode, S_IRUGO|S_IWUSR, trace_mode_show, trace_mode_store);
 
+static ssize_t trace_addrrange_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%08lx - %08lx\n", tracer.addrrange_start,
+		       tracer.addrrange_end);
+}
+
+static ssize_t trace_addrrange_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t n)
+{
+	unsigned long start, end;
+
+	if (tracer.flags & TRACER_RUNNING)
+		return -EBUSY;
+
+	if (sscanf(buf, "%08lx - %08lx", &start, &end) != 2)
+		return -EINVAL;
+
+	mutex_lock(&tracer.mutex);
+	tracer.addrrange_start = start;
+	tracer.addrrange_end = end;
+	mutex_unlock(&tracer.mutex);
+
+	return n;
+}
+
+DEVICE_ATTR(trace_addrrange, S_IRUGO|S_IWUSR,
+	    trace_addrrange_show, trace_addrrange_store);
+
 static int etm_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
@@ -557,6 +596,8 @@ static int etm_probe(struct amba_device *dev, const struct amba_id *id)
 	t->dev = &dev->dev;
 	t->flags = TRACER_CYCLE_ACC;
 	t->etm_portsz = 1;
+	t->addrrange_start = (unsigned long) _stext;
+	t->addrrange_end = (unsigned long) _etext;
 
 	etm_unlock(t);
 	(void)etm_readl(t, ETMMR_PDSR);
@@ -571,7 +612,7 @@ static int etm_probe(struct amba_device *dev, const struct amba_id *id)
 	if (ret)
 		goto out_unmap;
 
-	/* failing to create any of these two is not fatal */
+	/* failing to create any of these three is not fatal */
 	ret = device_create_file(&dev->dev, &dev_attr_trace_info);
 	if (ret)
 		dev_dbg(&dev->dev, "Failed to create trace_info in sysfs\n");
@@ -580,6 +621,10 @@ static int etm_probe(struct amba_device *dev, const struct amba_id *id)
 	if (ret)
 		dev_dbg(&dev->dev, "Failed to create trace_mode in sysfs\n");
 
+	ret = device_create_file(&dev->dev, &dev_attr_trace_addrrange);
+	if (ret)
+		dev_dbg(&dev->dev, "Failed to create trace_addrrange in sysfs\n");
+
 	dev_dbg(t->dev, "ETM AMBA driver initialized.\n");
 
 out:
@@ -609,6 +654,7 @@ static int etm_remove(struct amba_device *dev)
 	device_remove_file(&dev->dev, &dev_attr_trace_running);
 	device_remove_file(&dev->dev, &dev_attr_trace_info);
 	device_remove_file(&dev->dev, &dev_attr_trace_mode);
+	device_remove_file(&dev->dev, &dev_attr_trace_addrrange);
 
 	return 0;
 }
-- 
1.8.5.3

  parent reply	other threads:[~2014-01-30 16:11 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-30 16:11 [PATCH V3 0/5] ARM CoreSight: ETM: Fix a vmalloc/vfree failure and enhance tracing control Adrien Vergé
2014-01-30 16:11 ` [PATCH V3 1/5] ARM CoreSight: ETM: Fix a memory allocation failure Adrien Vergé
2014-01-30 16:11 ` [PATCH V3 2/5] ARM CoreSight: ETM: Use device attributes Adrien Vergé
2014-01-30 16:11 ` [PATCH V3 3/5] ARM CoreSight: ETM: Rename 'comparator' to 'address comparator' Adrien Vergé
2014-01-30 16:11 ` Adrien Vergé [this message]
2014-01-30 16:11 ` [PATCH V3 5/5] ARM CoreSight: ETM: Add PID control support Adrien Vergé
2014-02-03 10:46   ` Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391098270-8867-5-git-send-email-adrienverge@gmail.com \
    --to=adrienverge@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).