[PATCH] ARM: sun7i: dt: Fix interrupt trigger types

[maxime.ripard@free-electrons.com (Maxime Ripard)]

The Allwinner A20 uses the ARM GIC as its internal interrupts controller. The
GIC can work on several interrupt triggers, and the A20 was actually setting it
up to use a rising edge as a trigger, while it was actually a level high
trigger, leading to some interrupts that would be completely ignored if the
edge was missed.

Fix this for the remaining DT nodes that slipped through.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: stable at vger.kernel.org
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 119f066..2374f5a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -454,7 +454,7 @@
 		rtc: rtc at 01c20d00 {
 			compatible = "allwinner,sun7i-a20-rtc";
 			reg = <0x01c20d00 0x20>;
-			interrupts = <0 24 1>;
+			interrupts = <0 24 4>;
 		};
 
 		sid: eeprom at 01c23800 {
@@ -596,10 +596,10 @@
 		hstimer at 01c60000 {
 			compatible = "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
-			interrupts = <0 81 1>,
-				     <0 82 1>,
-				     <0 83 1>,
-				     <0 84 1>;
+			interrupts = <0 81 4>,
+				     <0 82 4>,
+				     <0 83 4>,
+				     <0 84 4>;
 			clocks = <&ahb_gates 28>;
 		};
 
-- 
1.8.4.2