From mboxrd@z Thu Jan 1 00:00:00 1970 From: tim.kryger@linaro.org (Tim Kryger) Date: Tue, 4 Feb 2014 15:27:40 -0800 Subject: [PATCH v2] ARM: dts: Leave sdio1 as disabled on bcm28155-ap Message-ID: <1391556460-24218-1-git-send-email-tim.kryger@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The sdio1 interface pins are routed to an unpopulated daughter card connector on the bcm28155-ap board. Thus there is no need to mark this interface as enabled. Signed-off-by: Tim Kryger Reviewed-by: Matt Porter --- Changes since v1: - Rebased on v3.14-rc1 arch/arm/boot/dts/bcm28155-ap.dts | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index 5ff2382..3604554 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -49,11 +49,6 @@ clock-frequency = <400000>; }; - sdio1: sdio at 3f180000 { - max-frequency = <48000000>; - status = "okay"; - }; - sdio2: sdio at 3f190000 { non-removable; max-frequency = <48000000>; -- 1.8.0.1