From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] DT support for kirkwood based Synology NAS boxes
Date: Wed, 5 Feb 2014 22:05:05 +0100 [thread overview]
Message-ID: <1391634309-3123-1-git-send-email-andrew@lunn.ch> (raw)
This patchset adds support for a number of kirkwood bases Synology NAS
boxes. Patch #1 generalized the qnap power off driver so that i can
also be used for Synology devices. Patch #2 and #3 document vendor
prefixes and i2c trivial devices. Patch #4 adds the synology DT files.
Andrew Lunn (4):
Power: Reset: Generalize qnap-poweroff to with on Synology devices.
DT: Vendor prefixes: Add ricoh, ssi and synology
DT: i2c: Trivial: Add sii,s35390a
ARM: Kirkwood: Add support for many Synology NAS devices
.../devicetree/bindings/i2c/trivial-devices.txt | 1 +
.../bindings/power_supply/qnap-poweroff.txt | 5 +-
.../devicetree/bindings/vendor-prefixes.txt | 3 +
arch/arm/boot/dts/Makefile | 15 +++
arch/arm/boot/dts/kirkwood-ds109.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds110jv10.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds111.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds112.dts | 34 ++++++
arch/arm/boot/dts/kirkwood-ds209.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds210.dts | 35 ++++++
arch/arm/boot/dts/kirkwood-ds212.dts | 37 +++++++
arch/arm/boot/dts/kirkwood-ds212j.dts | 34 ++++++
arch/arm/boot/dts/kirkwood-ds409.dts | 34 ++++++
arch/arm/boot/dts/kirkwood-ds409slim.dts | 32 ++++++
arch/arm/boot/dts/kirkwood-ds411.dts | 35 ++++++
arch/arm/boot/dts/kirkwood-ds411j.dts | 34 ++++++
arch/arm/boot/dts/kirkwood-ds411slim.dts | 34 ++++++
arch/arm/boot/dts/kirkwood-rs212.dts | 34 ++++++
arch/arm/boot/dts/kirkwood-rs409.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-rs411.dts | 34 ++++++
arch/arm/boot/dts/synology/alarm-led-12.dtsi | 28 +++++
arch/arm/boot/dts/synology/common.dtsi | 112 ++++++++++++++++++++
arch/arm/boot/dts/synology/ethernet-1.dtsi | 15 +++
arch/arm/boot/dts/synology/fan-alarm-18.dtsi | 22 ++++
arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi | 22 ++++
arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi | 32 ++++++
arch/arm/boot/dts/synology/fan-gpios-15.dtsi | 34 ++++++
arch/arm/boot/dts/synology/fan-gpios-32.dtsi | 34 ++++++
arch/arm/boot/dts/synology/fan-speed-100.dtsi | 20 ++++
arch/arm/boot/dts/synology/fan-speed-120.dtsi | 20 ++++
arch/arm/boot/dts/synology/fan-speed-150.dtsi | 20 ++++
arch/arm/boot/dts/synology/hdd-leds-20.dtsi | 90 ++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi | 36 +++++++
arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi | 52 +++++++++
arch/arm/boot/dts/synology/hdd-leds-36.dtsi | 103 ++++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-38.dtsi | 52 +++++++++
arch/arm/boot/dts/synology/hdd-power-29.dtsi | 56 ++++++++++
arch/arm/boot/dts/synology/hdd-power-30-1.dtsi | 40 +++++++
arch/arm/boot/dts/synology/hdd-power-30-2.dtsi | 56 ++++++++++
arch/arm/boot/dts/synology/hdd-power-30-4.dtsi | 89 ++++++++++++++++
arch/arm/boot/dts/synology/hdd-power-31.dtsi | 40 +++++++
arch/arm/boot/dts/synology/hdd-power-34.dtsi | 73 +++++++++++++
arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi | 18 ++++
arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi | 18 ++++
arch/arm/boot/dts/synology/pcie-2.dtsi | 19 ++++
drivers/power/reset/qnap-poweroff.c | 46 ++++++--
46 files changed, 1702 insertions(+), 11 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
create mode 100644 arch/arm/boot/dts/synology/alarm-led-12.dtsi
create mode 100644 arch/arm/boot/dts/synology/common.dtsi
create mode 100644 arch/arm/boot/dts/synology/ethernet-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-18.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-15.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-32.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-100.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-120.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-150.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-20.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-36.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-38.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-29.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-31.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-34.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
create mode 100644 arch/arm/boot/dts/synology/pcie-2.dtsi
--
1.7.10.4
next reply other threads:[~2014-02-05 21:05 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-05 21:05 Andrew Lunn [this message]
2014-02-05 21:05 ` [PATCH 1/4] Power: Reset: Generalize qnap-poweroff to with on Synology devices Andrew Lunn
2014-02-06 15:12 ` Jason Cooper
2014-02-05 21:05 ` [PATCH 2/4] DT: Vendor prefixes: Add ricoh, ssi and synology Andrew Lunn
2014-02-06 15:19 ` Jason Cooper
2014-02-06 15:49 ` Rob Herring
2014-02-05 21:05 ` [PATCH 3/4] DT: i2c: Trivial: Add sii,s35390a Andrew Lunn
2014-02-06 15:21 ` Jason Cooper
2014-02-05 21:05 ` [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices Andrew Lunn
2014-02-06 15:39 ` Jason Cooper
2014-02-06 16:01 ` Andrew Lunn
2014-02-06 16:38 ` Arnd Bergmann
2014-02-06 17:03 ` Andrew Lunn
2014-02-06 17:26 ` Jason Cooper
2014-02-07 7:44 ` Ben Peddell
2014-02-10 11:41 ` Ian Campbell
2014-02-06 16:39 ` Ian Campbell
2014-02-06 16:50 ` Andrew Lunn
2014-02-06 16:52 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391634309-3123-1-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).