linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 4/4] ehci-platform: Add support for controllers with big-endian regs / descriptors
Date: Fri,  7 Feb 2014 16:36:43 +0100	[thread overview]
Message-ID: <1391787403-20961-5-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1391787403-20961-1-git-send-email-hdegoede@redhat.com>

This uses the already documented devicetree booleans for this, see:
Documentation/devicetree/bindings/usb/usb-ehci.txt

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/usb/host/ehci-platform.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 5ebd0b7..8fde649 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -55,8 +55,10 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 
 	hcd->has_tt = pdata->has_tt;
 	ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
-	ehci->big_endian_desc = pdata->big_endian_desc;
-	ehci->big_endian_mmio = pdata->big_endian_mmio;
+	if (pdata->big_endian_desc)
+		ehci->big_endian_desc = 1;
+	if (pdata->big_endian_mmio)
+		ehci->big_endian_mmio = 1;
 
 	if (pdata->pre_setup) {
 		retval = pdata->pre_setup(hcd);
@@ -142,6 +144,7 @@ static int ehci_platform_probe(struct platform_device *dev)
 	struct resource *res_mem;
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ehci_platform_priv *priv;
+	struct ehci_hcd *ehci;
 	int err, irq, clk = 0;
 
 	if (usb_disabled())
@@ -177,8 +180,34 @@ static int ehci_platform_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, hcd);
 	dev->dev.platform_data = pdata;
 	priv = hcd_to_ehci_priv(hcd);
+	ehci = hcd_to_ehci(hcd);
 
 	if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+			ehci->big_endian_mmio = 1;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
+			ehci->big_endian_desc = 1;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+			ehci->big_endian_mmio = ehci->big_endian_desc = 1;
+
+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+		if (ehci->big_endian_mmio) {
+			dev_err(&dev->dev,
+				"Error big-endian-regs not compiled in\n");
+			err = -EINVAL;
+			goto err_put_hcd;
+		}
+#endif
+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
+		if (ehci->big_endian_desc) {
+			dev_err(&dev->dev,
+				"Error big-endian-desc not compiled in\n");
+			err = -EINVAL;
+			goto err_put_hcd;
+		}
+#endif
 		priv->phy = devm_phy_get(&dev->dev, "usb");
 		if (IS_ERR(priv->phy)) {
 			err = PTR_ERR(priv->phy);
-- 
1.8.4.2

  parent reply	other threads:[~2014-02-07 15:36 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-07 15:36 [PATCH v9 0/4] ohci-platform and ehci-plaform patches rebased on 3.14-rc1 Hans de Goede
2014-02-07 15:36 ` [PATCH v9 1/4] ohci-platform: Add support for devicetree instantiation Hans de Goede
2014-02-07 15:36 ` [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree Hans de Goede
2014-02-11  9:12   ` Roger Quadros
2014-02-11  9:31     ` Hans de Goede
2014-02-11 10:00       ` Roger Quadros
2014-02-11 10:13         ` Hans de Goede
2014-02-11 13:42           ` Roger Quadros
2014-02-07 15:36 ` [PATCH v9 3/4] ohci-platform: Add support for controllers with big-endian regs / descriptors Hans de Goede
2014-02-07 15:36 ` Hans de Goede [this message]
2014-02-07 22:31 ` [PATCH v9 0/4] ohci-platform and ehci-plaform patches rebased on 3.14-rc1 Greg Kroah-Hartman
2014-02-07 23:05   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391787403-20961-5-git-send-email-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).