[PATCH v4 0/5] Prepare for running ACPI on !x86 and !ia64

[PATCH v4 0/5] Prepare for running ACPI on !x86 and !ia64

[Hanjun Guo]

Some of the ACPI code is arch-dependent and make the code can't be
compiled on !x86 or !ia64, the first two patches just do some rework
on the idle_boot_override and _PDC related stuff to make the ACPI
code more arch-independent.

The third patch just introduce map_gic_id() for ACPI processor core
followed the ACPI 5.0 spec. Last two patches are just some cleanups.

I have compiled the kernel successfully after appling this patch set
on x86 and ia64.

Changes for v4:
a) remove preprocessor directives in function bodies;
b) add another two patches for cleanups.

Changes for v3:
Fix the issues pointed out by Lan Tianyu and add the Reviewed-by for
first patch.

Changes for v2:
a) add #if defined(CONFIG_X86) || defined(CONFIG_IA64) for
   idle_boot_override related code;
b) Rebased on 3.14-rc1.

Changes since the RFC version:
a) Remove the RFC tag;
b) Move idle_boot_override out of the arch directory suggested
   by Alan;
c) Make these 3 patches as a separate patch set since there are
   not not related to the ARM/ARM64 platform.

Hanjun Guo (5):
  ACPI / idle: Make idle_boot_override depend on x86 and ia64
  ACPI / processor_core: Rework _PDC related stuff to make it more
    arch-independent
  ACPI / processor: Introduce map_gic_id() to get apic id from MADT or
    _MAT method
  ACPI: Move BAD_MADT_ENTRY() to linux/acpi.h
  ACPI: Replace printk with pr_* in tables.c

 arch/ia64/include/asm/acpi.h  |    5 +--
 arch/ia64/kernel/acpi.c       |   18 ++++++--
 arch/x86/include/asm/acpi.h   |   19 +--------
 arch/x86/kernel/acpi/boot.c   |    4 --
 arch/x86/kernel/acpi/cstate.c |   29 +++++++++++++
 drivers/acpi/processor_core.c |   92 ++++++++++++++++++++++++-----------------
 drivers/acpi/tables.c         |   51 +++++++++--------------
 include/linux/acpi.h          |    4 ++
 8 files changed, 124 insertions(+), 98 deletions(-)

-- 
1.7.9.5

[PATCH v4 1/5] ACPI / idle: Make idle_boot_override depend on x86 and ia64

[Hanjun Guo]

idle_boot_override depends on x86 and ia64 now, and we can not
foresee it will be used on ARM or ARM64, so move the code into
CONFIG_X86 and CONFIG_IA64 #ifdefs to make processor_core.c
can be compiled on ARM64.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/acpi/processor_core.c |   47 ++++++++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 19 deletions(-)

diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 7c50a4c..636fd59 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -19,24 +19,6 @@
 #define _COMPONENT		ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_core");
 
-static int __init set_no_mwait(const struct dmi_system_id *id)
-{
-	printk(KERN_NOTICE PREFIX "%s detected - "
-		"disabling mwait for CPU C-states\n", id->ident);
-	boot_option_idle_override = IDLE_NOMWAIT;
-	return 0;
-}
-
-static struct dmi_system_id processor_idle_dmi_table[] __initdata = {
-	{
-	set_no_mwait, "Extensa 5220", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
-	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
-	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
-	{},
-};
-
 static int map_lapic_id(struct acpi_subtable_header *entry,
 		 u32 acpi_id, int *apic_id)
 {
@@ -379,13 +361,40 @@ early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv)
 	return AE_OK;
 }
 
-void __init acpi_early_processor_set_pdc(void)
+#if defined(CONFIG_X86) || defined(CONFIG_IA64)
+static int __init set_no_mwait(const struct dmi_system_id *id)
+{
+	pr_notice(PREFIX "%s detected - disabling mwait for CPU C-states\n",
+			id->ident);
+	boot_option_idle_override = IDLE_NOMWAIT;
+	return 0;
+}
+
+static struct dmi_system_id processor_idle_dmi_table[] __initdata = {
+	{
+	set_no_mwait, "Extensa 5220", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
+	{},
+};
+
+static void __init processor_dmi_check(void)
 {
 	/*
 	 * Check whether the system is DMI table. If yes, OSPM
 	 * should not use mwait for CPU-states.
 	 */
 	dmi_check_system(processor_idle_dmi_table);
+}
+#else
+static inline void processor_dmi_check(void) {}
+#endif
+
+void __init acpi_early_processor_set_pdc(void)
+{
+	processor_dmi_check();
 
 	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
 			    ACPI_UINT32_MAX,
-- 
1.7.9.5

[PATCH v4 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent

[Hanjun Guo]

_PDC related stuff in processor_core.c is little bit X86/IA64 dependent,
rework the code to make it more arch-independent, no functional change
in this patch.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
---
 arch/ia64/include/asm/acpi.h  |    5 +----
 arch/ia64/kernel/acpi.c       |   14 ++++++++++++++
 arch/x86/include/asm/acpi.h   |   19 +------------------
 arch/x86/kernel/acpi/cstate.c |   29 +++++++++++++++++++++++++++++
 drivers/acpi/processor_core.c |   19 +------------------
 5 files changed, 46 insertions(+), 40 deletions(-)

diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index d651102..d2b8b9d 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -152,10 +152,7 @@ extern int __initdata nid_to_pxm_map[MAX_NUMNODES];
 #endif
 
 static inline bool arch_has_acpi_pdc(void) { return true; }
-static inline void arch_acpi_set_pdc_bits(u32 *buf)
-{
-	buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP;
-}
+extern void arch_acpi_set_pdc_bits(u32 *buf);
 
 #define acpi_unlazy_tlb(x)
 
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 07d209c..af9d9e4 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -1014,3 +1014,17 @@ EXPORT_SYMBOL(acpi_unregister_ioapic);
  * TBD when when IA64 starts to support suspend...
  */
 int acpi_suspend_lowlevel(void) { return 0; }
+
+void arch_acpi_set_pdc_bits(u32 *buf)
+{
+	/* Enable coordination with firmware's _TSD info */
+	buf[2] |= ACPI_PDC_SMP_T_SWCOORD | ACPI_PDC_EST_CAPABILITY_SMP;
+	if (boot_option_idle_override == IDLE_NOMWAIT) {
+		/*
+		 * If mwait is disabled for CPU C-states, the C2C3_FFH access
+		 * mode will be disabled in the parameter of _PDC object.
+		 * Of course C1_FFH access mode will also be disabled.
+		 */
+		buf[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH);
+	}
+}
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index c8c1e70..e9f71bc 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -147,24 +147,7 @@ static inline bool arch_has_acpi_pdc(void)
 		c->x86_vendor == X86_VENDOR_CENTAUR);
 }
 
-static inline void arch_acpi_set_pdc_bits(u32 *buf)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	buf[2] |= ACPI_PDC_C_CAPABILITY_SMP;
-
-	if (cpu_has(c, X86_FEATURE_EST))
-		buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP;
-
-	if (cpu_has(c, X86_FEATURE_ACPI))
-		buf[2] |= ACPI_PDC_T_FFH;
-
-	/*
-	 * If mwait/monitor is unsupported, C2/C3_FFH will be disabled
-	 */
-	if (!cpu_has(c, X86_FEATURE_MWAIT))
-		buf[2] &= ~(ACPI_PDC_C_C2C3_FFH);
-}
+extern void arch_acpi_set_pdc_bits(u32 *buf);
 
 #else /* !CONFIG_ACPI */
 
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index e69182f..a36638f 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -16,6 +16,35 @@
 #include <asm/mwait.h>
 #include <asm/special_insns.h>
 
+void arch_acpi_set_pdc_bits(u32 *buf)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	/* Enable coordination with firmware's _TSD info */
+	buf[2] |= ACPI_PDC_SMP_T_SWCOORD | ACPI_PDC_C_CAPABILITY_SMP;
+
+	if (cpu_has(c, X86_FEATURE_EST))
+		buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP;
+
+	if (cpu_has(c, X86_FEATURE_ACPI))
+		buf[2] |= ACPI_PDC_T_FFH;
+
+	/*
+	 * If mwait/monitor is unsupported, C2/C3_FFH will be disabled
+	 */
+	if (!cpu_has(c, X86_FEATURE_MWAIT))
+		buf[2] &= ~(ACPI_PDC_C_C2C3_FFH);
+
+	if (boot_option_idle_override == IDLE_NOMWAIT) {
+		/*
+		 * If mwait is disabled for CPU C-states, the C2C3_FFH access
+		 * mode will be disabled in the parameter of _PDC object.
+		 * Of course C1_FFH access mode will also be disabled.
+		 */
+		buf[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH);
+	}
+}
+
 /*
  * Initialize bm_flags based on the CPU cache properties
  * On SMP it depends on cache configuration
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 636fd59..5bbc255 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -255,9 +255,6 @@ static void acpi_set_pdc_bits(u32 *buf)
 	buf[0] = ACPI_PDC_REVISION_ID;
 	buf[1] = 1;
 
-	/* Enable coordination with firmware's _TSD info */
-	buf[2] = ACPI_PDC_SMP_T_SWCOORD;
-
 	/* Twiddle arch-specific bits needed for _PDC */
 	arch_acpi_set_pdc_bits(buf);
 }
@@ -282,7 +279,7 @@ static struct acpi_object_list *acpi_processor_alloc_pdc(void)
 		return NULL;
 	}
 
-	buf = kmalloc(12, GFP_KERNEL);
+	buf = kzalloc(12, GFP_KERNEL);
 	if (!buf) {
 		printk(KERN_ERR "Memory allocation error\n");
 		kfree(obj);
@@ -310,20 +307,6 @@ acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in)
 {
 	acpi_status status = AE_OK;
 
-	if (boot_option_idle_override == IDLE_NOMWAIT) {
-		/*
-		 * If mwait is disabled for CPU C-states, the C2C3_FFH access
-		 * mode will be disabled in the parameter of _PDC object.
-		 * Of course C1_FFH access mode will also be disabled.
-		 */
-		union acpi_object *obj;
-		u32 *buffer = NULL;
-
-		obj = pdc_in->pointer;
-		buffer = (u32 *)(obj->buffer.pointer);
-		buffer[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH);
-
-	}
 	status = acpi_evaluate_object(handle, "_PDC", pdc_in, NULL);
 
 	if (ACPI_FAILURE(status))
-- 
1.7.9.5

[PATCH v4 3/5] ACPI / processor: Introduce map_gic_id() to get apic id from MADT or _MAT method

[Hanjun Guo]

Get apic id from MADT or _MAT method is not implemented on arm/arm64,
and ACPI 5.0 introduces GIC Structure for it, so this patch introduces
map_gic_id() to get apic id followed the ACPI 5.0 spec.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/acpi/processor_core.c |   26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 5bbc255..09fde83 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -71,6 +71,27 @@ static int map_lsapic_id(struct acpi_subtable_header *entry,
 	return 0;
 }
 
+static int map_gic_id(struct acpi_subtable_header *entry,
+		int device_declaration, u32 acpi_id, int *apic_id)
+{
+	struct acpi_madt_generic_interrupt *gic =
+		(struct acpi_madt_generic_interrupt *)entry;
+
+	if (!(gic->flags & ACPI_MADT_ENABLED))
+		return -ENODEV;
+
+	/* In the GIC interrupt model, logical processors are
+	 * required to have a Processor Device object in the DSDT,
+	 * so we should check device_declaration here
+	 */
+	if (device_declaration && (gic->uid == acpi_id)) {
+		*apic_id = gic->gic_id;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 static int map_madt_entry(int type, u32 acpi_id)
 {
 	unsigned long madt_end, entry;
@@ -106,6 +127,9 @@ static int map_madt_entry(int type, u32 acpi_id)
 		} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
 			if (!map_lsapic_id(header, type, acpi_id, &apic_id))
 				break;
+		} else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) {
+			if (!map_gic_id(header, type, acpi_id, &apic_id))
+				break;
 		}
 		entry += header->length;
 	}
@@ -136,6 +160,8 @@ static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
 		map_lapic_id(header, acpi_id, &apic_id);
 	} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
 		map_lsapic_id(header, type, acpi_id, &apic_id);
+	} else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) {
+		map_gic_id(header, type, acpi_id, &apic_id);
 	}
 
 exit:
-- 
1.7.9.5

[PATCH v4 4/5] ACPI: Move BAD_MADT_ENTRY() to linux/acpi.h

[Hanjun Guo]

BAD_MADT_ENTRY() is arch independent and will be used for all
archs which parsing MADT table, so move it to linux/acpi.h to
simply the code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 arch/ia64/kernel/acpi.c     |    4 ----
 arch/x86/kernel/acpi/boot.c |    4 ----
 include/linux/acpi.h        |    4 ++++
 3 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index af9d9e4..f7bd074 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -54,10 +54,6 @@
 #include <asm/sal.h>
 #include <asm/cyclone.h>
 
-#define BAD_MADT_ENTRY(entry, end) (                                        \
-		(!entry) || (unsigned long)entry + sizeof(*entry) > end ||  \
-		((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
-
 #define PREFIX			"ACPI: "
 
 unsigned int acpi_cpei_override;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 1dac942..123f9e3 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -53,10 +53,6 @@ EXPORT_SYMBOL(acpi_disabled);
 # include <asm/proto.h>
 #endif				/* X86 */
 
-#define BAD_MADT_ENTRY(entry, end) (					    \
-		(!entry) || (unsigned long)entry + sizeof(*entry) > end ||  \
-		((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
-
 #define PREFIX			"ACPI: "
 
 int acpi_noirq;				/* skip ACPI IRQ initialization */
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 1151a1d..6a15ddd 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -108,6 +108,10 @@ static inline void acpi_initrd_override(void *data, size_t size)
 }
 #endif
 
+#define BAD_MADT_ENTRY(entry, end) (					    \
+		(!entry) || (unsigned long)entry + sizeof(*entry) > end ||  \
+		((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
+
 char * __acpi_map_table (unsigned long phys_addr, unsigned long size);
 void __acpi_unmap_table(char *map, unsigned long size);
 int early_acpi_boot_init(void);
-- 
1.7.9.5

[PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c

[Hanjun Guo]

This patch just do some clean up to replace printk with pr_*,
no functional change.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/acpi/tables.c |   51 +++++++++++++++++++------------------------------
 1 file changed, 20 insertions(+), 31 deletions(-)

diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 5837f85..97bc6df 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -55,8 +55,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_madt_local_apic *p =
 			    (struct acpi_madt_local_apic *)header;
-			printk(KERN_INFO PREFIX
-			       "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
+			pr_info(PREFIX "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
 			       p->processor_id, p->id,
 			       (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");
 		}
@@ -66,8 +65,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_madt_local_x2apic *p =
 			    (struct acpi_madt_local_x2apic *)header;
-			printk(KERN_INFO PREFIX
-			       "X2APIC (apic_id[0x%02x] uid[0x%02x] %s)\n",
+			pr_info(PREFIX "X2APIC (apic_id[0x%02x] uid[0x%02x] %s)\n",
 			       p->local_apic_id, p->uid,
 			       (p->lapic_flags & ACPI_MADT_ENABLED) ?
 			       "enabled" : "disabled");
@@ -78,8 +76,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_madt_io_apic *p =
 			    (struct acpi_madt_io_apic *)header;
-			printk(KERN_INFO PREFIX
-			       "IOAPIC (id[0x%02x] address[0x%08x] gsi_base[%d])\n",
+			pr_info(PREFIX "IOAPIC (id[0x%02x] address[0x%08x] gsi_base[%d])\n",
 			       p->id, p->address, p->global_irq_base);
 		}
 		break;
@@ -88,15 +85,13 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_madt_interrupt_override *p =
 			    (struct acpi_madt_interrupt_override *)header;
-			printk(KERN_INFO PREFIX
-			       "INT_SRC_OVR (bus %d bus_irq %d global_irq %d %s %s)\n",
+			pr_info(PREFIX "INT_SRC_OVR (bus %d bus_irq %d global_irq %d %s %s)\n",
 			       p->bus, p->source_irq, p->global_irq,
 			       mps_inti_flags_polarity[p->inti_flags & ACPI_MADT_POLARITY_MASK],
 			       mps_inti_flags_trigger[(p->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2]);
 			if (p->inti_flags  &
 			    ~(ACPI_MADT_POLARITY_MASK | ACPI_MADT_TRIGGER_MASK))
-				printk(KERN_INFO PREFIX
-				       "INT_SRC_OVR unexpected reserved flags: 0x%x\n",
+				pr_info(PREFIX "INT_SRC_OVR unexpected reserved flags: 0x%x\n",
 				       p->inti_flags  &
 					~(ACPI_MADT_POLARITY_MASK | ACPI_MADT_TRIGGER_MASK));
 
@@ -107,8 +102,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_madt_nmi_source *p =
 			    (struct acpi_madt_nmi_source *)header;
-			printk(KERN_INFO PREFIX
-			       "NMI_SRC (%s %s global_irq %d)\n",
+			pr_info(PREFIX "NMI_SRC (%s %s global_irq %d)\n",
 			       mps_inti_flags_polarity[p->inti_flags & ACPI_MADT_POLARITY_MASK],
 			       mps_inti_flags_trigger[(p->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2],
 			       p->global_irq);
@@ -119,8 +113,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_madt_local_apic_nmi *p =
 			    (struct acpi_madt_local_apic_nmi *)header;
-			printk(KERN_INFO PREFIX
-			       "LAPIC_NMI (acpi_id[0x%02x] %s %s lint[0x%x])\n",
+			pr_info(PREFIX "LAPIC_NMI (acpi_id[0x%02x] %s %s lint[0x%x])\n",
 			       p->processor_id,
 			       mps_inti_flags_polarity[p->inti_flags & ACPI_MADT_POLARITY_MASK	],
 			       mps_inti_flags_trigger[(p->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2],
@@ -137,7 +130,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 			polarity = p->inti_flags & ACPI_MADT_POLARITY_MASK;
 			trigger = (p->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2;
 
-			printk(KERN_INFO PREFIX
+			pr_info(PREFIX
 			       "X2APIC_NMI (uid[0x%02x] %s %s lint[0x%x])\n",
 			       p->uid,
 			       mps_inti_flags_polarity[polarity],
@@ -150,8 +143,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_madt_local_apic_override *p =
 			    (struct acpi_madt_local_apic_override *)header;
-			printk(KERN_INFO PREFIX
-			       "LAPIC_ADDR_OVR (address[%p])\n",
+			pr_info(PREFIX "LAPIC_ADDR_OVR (address[%p])\n",
 			       (void *)(unsigned long)p->address);
 		}
 		break;
@@ -160,7 +152,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_madt_io_sapic *p =
 			    (struct acpi_madt_io_sapic *)header;
-			printk(KERN_INFO PREFIX
+			pr_info(PREFIX
 			       "IOSAPIC (id[0x%x] address[%p] gsi_base[%d])\n",
 			       p->id, (void *)(unsigned long)p->address,
 			       p->global_irq_base);
@@ -171,7 +163,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_madt_local_sapic *p =
 			    (struct acpi_madt_local_sapic *)header;
-			printk(KERN_INFO PREFIX
+			pr_info(PREFIX
 			       "LSAPIC (acpi_id[0x%02x] lsapic_id[0x%02x] lsapic_eid[0x%02x] %s)\n",
 			       p->processor_id, p->id, p->eid,
 			       (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");
@@ -182,7 +174,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_madt_interrupt_source *p =
 			    (struct acpi_madt_interrupt_source *)header;
-			printk(KERN_INFO PREFIX
+			pr_info(PREFIX
 			       "PLAT_INT_SRC (%s %s type[0x%x] id[0x%04x] eid[0x%x] iosapic_vector[0x%x] global_irq[0x%x]\n",
 			       mps_inti_flags_polarity[p->inti_flags & ACPI_MADT_POLARITY_MASK],
 			       mps_inti_flags_trigger[(p->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2],
@@ -192,8 +184,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 		break;
 
 	default:
-		printk(KERN_WARNING PREFIX
-		       "Found unsupported MADT entry (type = 0x%x)\n",
+		pr_warn(PREFIX "Found unsupported MADT entry (type = 0x%x)\n",
 		       header->type);
 		break;
 	}
@@ -225,7 +216,7 @@ acpi_table_parse_entries(char *id,
 		acpi_get_table_with_size(id, 0, &table_header, &tbl_size);
 
 	if (!table_header) {
-		printk(KERN_WARNING PREFIX "%4.4s not present\n", id);
+		pr_warn(PREFIX "%4.4s not present\n", id);
 		return -ENODEV;
 	}
 
@@ -256,8 +247,8 @@ acpi_table_parse_entries(char *id,
 		    ((unsigned long)entry + entry->length);
 	}
 	if (max_entries && count > max_entries) {
-		printk(KERN_WARNING PREFIX "[%4.4s:0x%02x] ignored %i entries of "
-		       "%i found\n", id, entry_id, count - max_entries, count);
+		pr_warn(PREFIX "[%4.4s:0x%02x] ignored %i entries of %i found\n",
+			id, entry_id, count - max_entries, count);
 	}
 
 	early_acpi_os_unmap_memory((char *)table_header, tbl_size);
@@ -322,11 +313,9 @@ static void __init check_multiple_madt(void)
 
 	acpi_get_table_with_size(ACPI_SIG_MADT, 2, &table, &tbl_size);
 	if (table) {
-		printk(KERN_WARNING PREFIX
-		       "BIOS bug: multiple APIC/MADT found,"
-		       " using %d\n", acpi_apic_instance);
-		printk(KERN_WARNING PREFIX
-		       "If \"acpi_apic_instance=%d\" works better, "
+		pr_warn(PREFIX "BIOS bug: multiple APIC/MADT found, using %d\n",
+			acpi_apic_instance);
+		pr_warn(PREFIX "If \"acpi_apic_instance=%d\" works better, "
 		       "notify linux-acpi at vger.kernel.org\n",
 		       acpi_apic_instance ? 0 : 2);
 		early_acpi_os_unmap_memory(table, tbl_size);
@@ -365,7 +354,7 @@ static int __init acpi_parse_apic_instance(char *str)
 
 	acpi_apic_instance = simple_strtoul(str, NULL, 0);
 
-	printk(KERN_NOTICE PREFIX "Shall use APIC/MADT table %d\n",
+	pr_notice(PREFIX "Shall use APIC/MADT table %d\n",
 	       acpi_apic_instance);
 
 	return 0;
-- 
1.7.9.5

[PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c

[Joe Perches]

On Tue, 2014-02-18 at 21:55 +0800, Hanjun Guo wrote:
> This patch just do some clean up to replace printk with pr_*,
> no functional change.

trivial note:

> diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
[]
> @@ -55,8 +55,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
>  		{
>  			struct acpi_madt_local_apic *p =
>  			    (struct acpi_madt_local_apic *)header;
> -			printk(KERN_INFO PREFIX
> -			       "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
> +			pr_info(PREFIX "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
>  			       p->processor_id, p->id,
>  			       (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");

It'd be nice to realign the additional lines to the open
parenthesis, here and everywhere else in this patch

			pr_info(PREFIX "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
				p->processor_id, p->id,
				(p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");

[PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c

[Hanjun Guo]

On 2014?02?18? 22:06, Joe Perches wrote:
> On Tue, 2014-02-18 at 21:55 +0800, Hanjun Guo wrote:
>> This patch just do some clean up to replace printk with pr_*,
>> no functional change.
> trivial note:
>
>> diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
> []
>> @@ -55,8 +55,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
>>   		{
>>   			struct acpi_madt_local_apic *p =
>>   			    (struct acpi_madt_local_apic *)header;
>> -			printk(KERN_INFO PREFIX
>> -			       "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
>> +			pr_info(PREFIX "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
>>   			       p->processor_id, p->id,
>>   			       (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");
> It'd be nice to realign the additional lines to the open
> parenthesis, here and everywhere else in this patch
>
> 			pr_info(PREFIX "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
> 				p->processor_id, p->id,
> 				(p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");

Thanks for your comments, will update patch 1/5 and 5/5 follow your 
suggestion :)

Hanjun

[Linaro-acpi] [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c

[Sudeep Holla]

On 18/02/14 13:55, Hanjun Guo wrote:
> This patch just do some clean up to replace printk with pr_*,
> no functional change.
> 
Any particular reason for choosing just this file in this series ?
It seems but off-topic in this series. The printk format is same in almost all
other acpi files and it's better to change all or none for consistency.

> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> ---
>  drivers/acpi/tables.c |   51 +++++++++++++++++++------------------------------
>  1 file changed, 20 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
> index 5837f85..97bc6df 100644
> --- a/drivers/acpi/tables.c
> +++ b/drivers/acpi/tables.c
> @@ -55,8 +55,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
>  		{
>  			struct acpi_madt_local_apic *p =
>  			    (struct acpi_madt_local_apic *)header;
> -			printk(KERN_INFO PREFIX
> -			       "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
> +			pr_info(PREFIX "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",

You can even get rid of PREFIX by defining pr_fmt instead.

If the intention is to move to pr_* format it's better to have this as separate
patch and convert all of them. Based on the grep patterns, regex should to
helpful to find and replace them all :)

Regards,
Sudeep

[Linaro-acpi] [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c

[Rafael J. Wysocki]

On Wednesday, February 19, 2014 04:32:34 PM Sudeep Holla wrote:
> On 18/02/14 13:55, Hanjun Guo wrote:
> > This patch just do some clean up to replace printk with pr_*,
> > no functional change.
> > 
> Any particular reason for choosing just this file in this series ?
> It seems but off-topic in this series. The printk format is same in almost all
> other acpi files and it's better to change all or none for consistency.

Well, it's fine, I can put it into a different branch in any case. :-)

> > Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> > ---
> >  drivers/acpi/tables.c |   51 +++++++++++++++++++------------------------------
> >  1 file changed, 20 insertions(+), 31 deletions(-)
> > 
> > diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
> > index 5837f85..97bc6df 100644
> > --- a/drivers/acpi/tables.c
> > +++ b/drivers/acpi/tables.c
> > @@ -55,8 +55,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
> >  		{
> >  			struct acpi_madt_local_apic *p =
> >  			    (struct acpi_madt_local_apic *)header;
> > -			printk(KERN_INFO PREFIX
> > -			       "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
> > +			pr_info(PREFIX "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
> 
> You can even get rid of PREFIX by defining pr_fmt instead.

But this is a good point.

> If the intention is to move to pr_* format it's better to have this as separate
> patch and convert all of them.

Well, not really.  One file at a time is OK too.

Thanks!

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

[Linaro-acpi] [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c

[Sudeep Holla]

On 19/02/14 16:49, Rafael J. Wysocki wrote:
> On Wednesday, February 19, 2014 04:32:34 PM Sudeep Holla wrote:
>> On 18/02/14 13:55, Hanjun Guo wrote:
>>> This patch just do some clean up to replace printk with pr_*,
>>> no functional change.
>>>
>> Any particular reason for choosing just this file in this series ?
>> It seems but off-topic in this series. The printk format is same in almost all
>> other acpi files and it's better to change all or none for consistency.
> 
> Well, it's fine, I can put it into a different branch in any case. :-)
> 
>>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>>> ---
>>>  drivers/acpi/tables.c |   51 +++++++++++++++++++------------------------------
>>>  1 file changed, 20 insertions(+), 31 deletions(-)
>>>
>>> diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
>>> index 5837f85..97bc6df 100644
>>> --- a/drivers/acpi/tables.c
>>> +++ b/drivers/acpi/tables.c
>>> @@ -55,8 +55,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
>>>  		{
>>>  			struct acpi_madt_local_apic *p =
>>>  			    (struct acpi_madt_local_apic *)header;
>>> -			printk(KERN_INFO PREFIX
>>> -			       "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
>>> +			pr_info(PREFIX "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
>>
>> You can even get rid of PREFIX by defining pr_fmt instead.
> 
> But this is a good point.
> 
>> If the intention is to move to pr_* format it's better to have this as separate
>> patch and convert all of them.
> 
> Well, not really.  One file at a time is OK too.
> 
No what I meant was to convert all for consistency, not in a single patch.
As I was playing with regex for few minutes, with few patterns was able to fix
most(not all) of them. It even compiles :) for x86. But turns out to be a big
churn :( [43 files changed, 253 insertions(+), 329 deletions(-)]

Regards,
Sudeep

[Linaro-acpi] [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c

[Rafael J. Wysocki]

On Wednesday, February 19, 2014 04:46:19 PM Sudeep Holla wrote:
> On 19/02/14 16:49, Rafael J. Wysocki wrote:
> > On Wednesday, February 19, 2014 04:32:34 PM Sudeep Holla wrote:
> >> On 18/02/14 13:55, Hanjun Guo wrote:
> >>> This patch just do some clean up to replace printk with pr_*,
> >>> no functional change.
> >>>
> >> Any particular reason for choosing just this file in this series ?
> >> It seems but off-topic in this series. The printk format is same in almost all
> >> other acpi files and it's better to change all or none for consistency.
> > 
> > Well, it's fine, I can put it into a different branch in any case. :-)
> > 
> >>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> >>> ---
> >>>  drivers/acpi/tables.c |   51 +++++++++++++++++++------------------------------
> >>>  1 file changed, 20 insertions(+), 31 deletions(-)
> >>>
> >>> diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
> >>> index 5837f85..97bc6df 100644
> >>> --- a/drivers/acpi/tables.c
> >>> +++ b/drivers/acpi/tables.c
> >>> @@ -55,8 +55,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
> >>>  		{
> >>>  			struct acpi_madt_local_apic *p =
> >>>  			    (struct acpi_madt_local_apic *)header;
> >>> -			printk(KERN_INFO PREFIX
> >>> -			       "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
> >>> +			pr_info(PREFIX "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
> >>
> >> You can even get rid of PREFIX by defining pr_fmt instead.
> > 
> > But this is a good point.
> > 
> >> If the intention is to move to pr_* format it's better to have this as separate
> >> patch and convert all of them.
> > 
> > Well, not really.  One file at a time is OK too.
> > 
> No what I meant was to convert all for consistency, not in a single patch.
> As I was playing with regex for few minutes, with few patterns was able to fix
> most(not all) of them. It even compiles :) for x86. But turns out to be a big
> churn :( [43 files changed, 253 insertions(+), 329 deletions(-)]

Well, precisely.  That's why I'd prefer doing that gradually.

That said I'll just drop the patch for now due to the PREFIX thing.

Thanks!

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

[Linaro-acpi] [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c

[Hanjun Guo]

On 2014?02?20? 08:37, Rafael J. Wysocki wrote:
> On Wednesday, February 19, 2014 04:46:19 PM Sudeep Holla wrote:
>> On 19/02/14 16:49, Rafael J. Wysocki wrote:
>>> On Wednesday, February 19, 2014 04:32:34 PM Sudeep Holla wrote:
>>>> On 18/02/14 13:55, Hanjun Guo wrote:
>>>>> This patch just do some clean up to replace printk with pr_*,
>>>>> no functional change.
>>>>>
>>>> Any particular reason for choosing just this file in this series ?

Yes, the reason is that I will update this file in my next patch set 
(ARM64 ACPI core) with
pr_*, in order to keep  consistency, I updated them all in this file first.

>>>> It seems but off-topic in this series. The printk format is same in almost all
>>>> other acpi files and it's better to change all or none for consistency.
>>> Well, it's fine, I can put it into a different branch in any case. :-)
>>>
>>>>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>>>>> ---
>>>>>   drivers/acpi/tables.c |   51 +++++++++++++++++++------------------------------
>>>>>   1 file changed, 20 insertions(+), 31 deletions(-)
>>>>>
>>>>> diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
>>>>> index 5837f85..97bc6df 100644
>>>>> --- a/drivers/acpi/tables.c
>>>>> +++ b/drivers/acpi/tables.c
>>>>> @@ -55,8 +55,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
>>>>>   		{
>>>>>   			struct acpi_madt_local_apic *p =
>>>>>   			    (struct acpi_madt_local_apic *)header;
>>>>> -			printk(KERN_INFO PREFIX
>>>>> -			       "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
>>>>> +			pr_info(PREFIX "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
>>>> You can even get rid of PREFIX by defining pr_fmt instead.
>>> But this is a good point.
>>>
>>>> If the intention is to move to pr_* format it's better to have this as separate
>>>> patch and convert all of them.
>>> Well, not really.  One file at a time is OK too.
>>>
>> No what I meant was to convert all for consistency, not in a single patch.
>> As I was playing with regex for few minutes, with few patterns was able to fix
>> most(not all) of them. It even compiles :) for x86. But turns out to be a big
>> churn :( [43 files changed, 253 insertions(+), 329 deletions(-)]
> Well, precisely.  That's why I'd prefer doing that gradually.
>
> That said I'll just drop the patch for now due to the PREFIX thing.

I will update this patch accordingly and send it out soon.

Thanks
Hanjun