[PATCH 02/35] mtd: st_spi_fsm: Supply all register address and bit logic defines

[lee.jones@linaro.org (Lee Jones)]

Here we provide the FSM's register addresses, register bit names/offsets
and some commands which will prove useful as we start bulk the FMS's
driver out with functionality.

Acked-by Angus Clark <angus.clark@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mtd/devices/st_spi_fsm.c | 172 ++++++++++++++++++++++++++++++++++++++-
 drivers/mtd/devices/st_spi_fsm.h |  27 ------
 2 files changed, 171 insertions(+), 28 deletions(-)
 delete mode 100644 drivers/mtd/devices/st_spi_fsm.h

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 2f4ebb4..e548384 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -21,7 +21,177 @@
 #include <linux/io.h>
 #include <linux/of.h>
 
-#include "st_spi_fsm.h"
+/*
+ * FSM SPI Controller Registers
+ */
+#define SPI_CLOCKDIV			0x0010
+#define SPI_MODESELECT			0x0018
+#define SPI_CONFIGDATA			0x0020
+#define SPI_STA_MODE_CHANGE		0x0028
+#define SPI_FAST_SEQ_TRANSFER_SIZE	0x0100
+#define SPI_FAST_SEQ_ADD1		0x0104
+#define SPI_FAST_SEQ_ADD2		0x0108
+#define SPI_FAST_SEQ_ADD_CFG		0x010c
+#define SPI_FAST_SEQ_OPC1		0x0110
+#define SPI_FAST_SEQ_OPC2		0x0114
+#define SPI_FAST_SEQ_OPC3		0x0118
+#define SPI_FAST_SEQ_OPC4		0x011c
+#define SPI_FAST_SEQ_OPC5		0x0120
+#define SPI_MODE_BITS			0x0124
+#define SPI_DUMMY_BITS			0x0128
+#define SPI_FAST_SEQ_FLASH_STA_DATA	0x012c
+#define SPI_FAST_SEQ_1			0x0130
+#define SPI_FAST_SEQ_2			0x0134
+#define SPI_FAST_SEQ_3			0x0138
+#define SPI_FAST_SEQ_4			0x013c
+#define SPI_FAST_SEQ_CFG		0x0140
+#define SPI_FAST_SEQ_STA		0x0144
+#define SPI_QUAD_BOOT_SEQ_INIT_1	0x0148
+#define SPI_QUAD_BOOT_SEQ_INIT_2	0x014c
+#define SPI_QUAD_BOOT_READ_SEQ_1	0x0150
+#define SPI_QUAD_BOOT_READ_SEQ_2	0x0154
+#define SPI_PROGRAM_ERASE_TIME		0x0158
+#define SPI_MULT_PAGE_REPEAT_SEQ_1	0x015c
+#define SPI_MULT_PAGE_REPEAT_SEQ_2	0x0160
+#define SPI_STATUS_WR_TIME_REG		0x0164
+#define SPI_FAST_SEQ_DATA_REG		0x0300
+
+/*
+ * Register: SPI_MODESELECT
+ */
+#define SPI_MODESELECT_CONTIG		0x01
+#define SPI_MODESELECT_FASTREAD		0x02
+#define SPI_MODESELECT_DUALIO		0x04
+#define SPI_MODESELECT_FSM		0x08
+#define SPI_MODESELECT_QUADBOOT		0x10
+
+/*
+ * Register: SPI_CONFIGDATA
+ */
+#define SPI_CFG_DEVICE_ST		0x1
+#define SPI_CFG_DEVICE_ATMEL		0x4
+#define SPI_CFG_MIN_CS_HIGH(x)		(((x) & 0xfff) << 4)
+#define SPI_CFG_CS_SETUPHOLD(x)		(((x) & 0xff) << 16)
+#define SPI_CFG_DATA_HOLD(x)		(((x) & 0xff) << 24)
+
+/*
+ * Register: SPI_FAST_SEQ_TRANSFER_SIZE
+ */
+#define TRANSFER_SIZE(x)		((x) * 8)
+
+/*
+ * Register: SPI_FAST_SEQ_ADD_CFG
+ */
+#define ADR_CFG_CYCLES_ADD1(x)		((x) << 0)
+#define ADR_CFG_PADS_1_ADD1		(0x0 << 6)
+#define ADR_CFG_PADS_2_ADD1		(0x1 << 6)
+#define ADR_CFG_PADS_4_ADD1		(0x3 << 6)
+#define ADR_CFG_CSDEASSERT_ADD1		(1   << 8)
+#define ADR_CFG_CYCLES_ADD2(x)		((x) << (0+16))
+#define ADR_CFG_PADS_1_ADD2		(0x0 << (6+16))
+#define ADR_CFG_PADS_2_ADD2		(0x1 << (6+16))
+#define ADR_CFG_PADS_4_ADD2		(0x3 << (6+16))
+#define ADR_CFG_CSDEASSERT_ADD2		(1   << (8+16))
+
+/*
+ * Register: SPI_FAST_SEQ_n
+ */
+#define SEQ_OPC_OPCODE(x)		((x) << 0)
+#define SEQ_OPC_CYCLES(x)		((x) << 8)
+#define SEQ_OPC_PADS_1			(0x0 << 14)
+#define SEQ_OPC_PADS_2			(0x1 << 14)
+#define SEQ_OPC_PADS_4			(0x3 << 14)
+#define SEQ_OPC_CSDEASSERT		(1   << 16)
+
+/*
+ * Register: SPI_FAST_SEQ_CFG
+ */
+#define SEQ_CFG_STARTSEQ		(1 << 0)
+#define SEQ_CFG_SWRESET			(1 << 5)
+#define SEQ_CFG_CSDEASSERT		(1 << 6)
+#define SEQ_CFG_READNOTWRITE		(1 << 7)
+#define SEQ_CFG_ERASE			(1 << 8)
+#define SEQ_CFG_PADS_1			(0x0 << 16)
+#define SEQ_CFG_PADS_2			(0x1 << 16)
+#define SEQ_CFG_PADS_4			(0x3 << 16)
+
+/*
+ * Register: SPI_MODE_BITS
+ */
+#define MODE_DATA(x)			(x & 0xff)
+#define MODE_CYCLES(x)			((x & 0x3f) << 16)
+#define MODE_PADS_1			(0x0 << 22)
+#define MODE_PADS_2			(0x1 << 22)
+#define MODE_PADS_4			(0x3 << 22)
+#define DUMMY_CSDEASSERT		(1   << 24)
+
+/*
+ * Register: SPI_DUMMY_BITS
+ */
+#define DUMMY_CYCLES(x)			((x & 0x3f) << 16)
+#define DUMMY_PADS_1			(0x0 << 22)
+#define DUMMY_PADS_2			(0x1 << 22)
+#define DUMMY_PADS_4			(0x3 << 22)
+#define DUMMY_CSDEASSERT		(1   << 24)
+
+/*
+ * Register: SPI_FAST_SEQ_FLASH_STA_DATA
+ */
+#define STA_DATA_BYTE1(x)		((x & 0xff) << 0)
+#define STA_DATA_BYTE2(x)		((x & 0xff) << 8)
+#define STA_PADS_1			(0x0 << 16)
+#define STA_PADS_2			(0x1 << 16)
+#define STA_PADS_4			(0x3 << 16)
+#define STA_CSDEASSERT			(0x1 << 20)
+#define STA_RDNOTWR			(0x1 << 21)
+
+/*
+ * FSM SPI Instruction Opcodes
+ */
+#define STFSM_OPC_CMD			0x1
+#define STFSM_OPC_ADD			0x2
+#define STFSM_OPC_STA			0x3
+#define STFSM_OPC_MODE			0x4
+#define STFSM_OPC_DUMMY		0x5
+#define STFSM_OPC_DATA			0x6
+#define STFSM_OPC_WAIT			0x7
+#define STFSM_OPC_JUMP			0x8
+#define STFSM_OPC_GOTO			0x9
+#define STFSM_OPC_STOP			0xF
+
+/*
+ * FSM SPI Instructions (== opcode + operand).
+ */
+#define STFSM_INSTR(cmd, op)		((cmd) | ((op) << 4))
+
+#define STFSM_INST_CMD1			STFSM_INSTR(STFSM_OPC_CMD,	1)
+#define STFSM_INST_CMD2			STFSM_INSTR(STFSM_OPC_CMD,	2)
+#define STFSM_INST_CMD3			STFSM_INSTR(STFSM_OPC_CMD,	3)
+#define STFSM_INST_CMD4			STFSM_INSTR(STFSM_OPC_CMD,	4)
+#define STFSM_INST_CMD5			STFSM_INSTR(STFSM_OPC_CMD,	5)
+#define STFSM_INST_ADD1			STFSM_INSTR(STFSM_OPC_ADD,	1)
+#define STFSM_INST_ADD2			STFSM_INSTR(STFSM_OPC_ADD,	2)
+
+#define STFSM_INST_DATA_WRITE		STFSM_INSTR(STFSM_OPC_DATA,	1)
+#define STFSM_INST_DATA_READ		STFSM_INSTR(STFSM_OPC_DATA,	2)
+
+#define STFSM_INST_STA_RD1		STFSM_INSTR(STFSM_OPC_STA,	0x1)
+#define STFSM_INST_STA_WR1		STFSM_INSTR(STFSM_OPC_STA,	0x1)
+#define STFSM_INST_STA_RD2		STFSM_INSTR(STFSM_OPC_STA,	0x2)
+#define STFSM_INST_STA_WR1_2		STFSM_INSTR(STFSM_OPC_STA,	0x3)
+
+#define STFSM_INST_MODE			STFSM_INSTR(STFSM_OPC_MODE,	0)
+#define STFSM_INST_DUMMY		STFSM_INSTR(STFSM_OPC_DUMMY,	0)
+#define STFSM_INST_WAIT			STFSM_INSTR(STFSM_OPC_WAIT,	0)
+#define STFSM_INST_STOP			STFSM_INSTR(STFSM_OPC_STOP,	0)
+
+struct stfsm {
+	struct device		*dev;
+	void __iomem		*base;
+	struct resource		*region;
+	struct mtd_info		mtd;
+	struct mutex		lock;
+};
 
 static int stfsm_probe(struct platform_device *pdev)
 {
diff --git a/drivers/mtd/devices/st_spi_fsm.h b/drivers/mtd/devices/st_spi_fsm.h
deleted file mode 100644
index df45e1a..0000000
--- a/drivers/mtd/devices/st_spi_fsm.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * st_spi_fsm.c	Support for ST Serial Flash Controller
- *
- * Author: Angus Clark <angus.clark@st.com>
- *
- * Copyright (C) 2010-2013 STicroelectronics Limited
- *
- * JEDEC probe based on drivers/mtd/devices/m25p80.c
- *
- * This code is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef ST_SPI_FSM_H
-#define ST_SPI_FSM_H
-
-struct stfsm {
-	struct device		*dev;
-	void __iomem		*base;
-	struct resource		*region;
-	struct mtd_info		mtd;
-	struct mutex		lock;
-};
-
-#endif	/* ST_SPI_FSM_H */
-- 
1.8.3.2