From mboxrd@z Thu Jan 1 00:00:00 1970 From: rogerq@ti.com (Roger Quadros) Date: Thu, 20 Feb 2014 13:40:00 +0200 Subject: [PATCH v8 05/14] mfd: omap-usb-tll: Update DT clock binding information In-Reply-To: <1392896409-5101-1-git-send-email-rogerq@ti.com> References: <1392896409-5101-1-git-send-email-rogerq@ti.com> Message-ID: <1392896409-5101-6-git-send-email-rogerq@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The omap-usb-tll driver needs one clock for each TLL channel. Add this information to the DT binding document. CC: Lee Jones CC: Samuel Ortiz Signed-off-by: Roger Quadros --- Documentation/devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt index 62fe697..c58d704 100644 --- a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt +++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt @@ -7,6 +7,16 @@ Required properties: - interrupts : should contain the TLL module's interrupt - ti,hwmod : must contain "usb_tll_hs" +Optional properties: + +- clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + +- clock-names: should include: + * "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock + * "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock + * "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock + Example: usbhstll: usbhstll at 4a062000 { -- 1.8.3.2