linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 06/15] ahci-platform: "Library-ise" suspend / resume functionality
Date: Sat, 22 Feb 2014 16:53:35 +0100	[thread overview]
Message-ID: <1393084424-31099-7-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1393084424-31099-1-git-send-email-hdegoede@redhat.com>

Split suspend / resume code into host suspend / resume functionality and
resource enable / disabling phases, and export the new suspend_ / resume_host
functions.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/ata/ahci_platform.c   | 109 ++++++++++++++++++++++++++++++++++++------
 include/linux/ahci_platform.h |   5 ++
 2 files changed, 99 insertions(+), 15 deletions(-)

diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 7f3f2ac..bdadec1 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -452,14 +452,26 @@ static void ahci_host_stop(struct ata_host *host)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int ahci_suspend(struct device *dev)
+/**
+ *	ahci_platform_suspend_host - Suspend an ahci-platform host
+ *	@dev: device pointer for the host
+ *
+ *	This function does all the usual steps needed to suspend an
+ *	ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ *	must be disabled after calling this.
+ *
+ *	LOCKING:
+ *	None.
+ *
+ *	RETURNS:
+ *	0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend_host(struct device *dev)
 {
-	struct ahci_platform_data *pdata = dev_get_platdata(dev);
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	void __iomem *mmio = hpriv->mmio;
 	u32 ctl;
-	int rc;
 
 	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
 		dev_err(dev, "firmware update required for suspend/resume\n");
@@ -476,7 +488,64 @@ static int ahci_suspend(struct device *dev)
 	writel(ctl, mmio + HOST_CTL);
 	readl(mmio + HOST_CTL); /* flush */
 
-	rc = ata_host_suspend(host, PMSG_SUSPEND);
+	return ata_host_suspend(host, PMSG_SUSPEND);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
+
+/**
+ *	ahci_platform_resume_host - Resume an ahci-platform host
+ *	@dev: device pointer for the host
+ *
+ *	This function does all the usual steps needed to resume an
+ *	ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ *	must be initialized / enabled before calling this.
+ *
+ *	LOCKING:
+ *	None.
+ *
+ *	RETURNS:
+ *	0 on success otherwise a negative error code
+ */
+int ahci_platform_resume_host(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	int rc;
+
+	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+		rc = ahci_reset_controller(host);
+		if (rc)
+			return rc;
+
+		ahci_init_controller(host);
+	}
+
+	ata_host_resume(host);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
+
+/**
+ *	ahci_platform_suspend - Suspend an ahci-platform device
+ *	@dev: the platform device to suspend
+ *
+ *	This function suspends the host associated with the device, followed
+ *	by disabling all the resources of the device.
+ *
+ *	LOCKING:
+ *	None.
+ *
+ *	RETURNS:
+ *	0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend(struct device *dev)
+{
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	int rc;
+
+	rc = ahci_platform_suspend_host(dev);
 	if (rc)
 		return rc;
 
@@ -487,8 +556,22 @@ static int ahci_suspend(struct device *dev)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ahci_platform_suspend);
 
-static int ahci_resume(struct device *dev)
+/**
+ *	ahci_platform_resume - Resume an ahci-platform device
+ *	@dev: the platform device to resume
+ *
+ *	This function enables all the resources of the device followed by
+ *	resuming the host associated with the device.
+ *
+ *	LOCKING:
+ *	None.
+ *
+ *	RETURNS:
+ *	0 on success otherwise a negative error code
+ */
+int ahci_platform_resume(struct device *dev)
 {
 	struct ahci_platform_data *pdata = dev_get_platdata(dev);
 	struct ata_host *host = dev_get_drvdata(dev);
@@ -505,15 +588,9 @@ static int ahci_resume(struct device *dev)
 			goto disable_resources;
 	}
 
-	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = ahci_reset_controller(host);
-		if (rc)
-			goto disable_resources;
-
-		ahci_init_controller(host);
-	}
-
-	ata_host_resume(host);
+	rc = ahci_platform_resume_host(dev);
+	if (rc)
+		goto disable_resources;
 
 	return 0;
 
@@ -522,9 +599,11 @@ disable_resources:
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ahci_platform_resume);
 #endif
 
-static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
+			 ahci_platform_resume);
 
 static const struct of_device_id ahci_of_match[] = {
 	{ .compatible = "snps,spear-ahci", },
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index b80c51c..542f268 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -50,4 +50,9 @@ int ahci_platform_init_host(struct platform_device *pdev,
 			    unsigned int force_port_map,
 			    unsigned int mask_port_map);
 
+int ahci_platform_suspend_host(struct device *dev);
+int ahci_platform_resume_host(struct device *dev);
+int ahci_platform_suspend(struct device *dev);
+int ahci_platform_resume(struct device *dev);
+
 #endif /* _AHCI_PLATFORM_H */
-- 
1.9.0

  parent reply	other threads:[~2014-02-22 15:53 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-22 15:53 No subject Hans de Goede
2014-02-22 15:53 ` [PATCH v7 01/15] libahci: Allow drivers to override start_engine Hans de Goede
2014-02-22 15:53 ` [PATCH v7 02/15] ahci-platform: Add support for devices with more then 1 clock Hans de Goede
2014-03-03 17:40   ` Bartlomiej Zolnierkiewicz
2014-02-22 15:53 ` [PATCH v7 03/15] ahci-platform: Add support for an optional regulator for sata-target power Hans de Goede
2014-02-22 15:53 ` [PATCH v7 04/15] ahci-platform: Add enable_ / disable_resources helper functions Hans de Goede
2014-02-22 15:53 ` [PATCH v7 05/15] ahci-platform: "Library-ise" ahci_probe functionality Hans de Goede
2014-03-03 18:38   ` Bartlomiej Zolnierkiewicz
2014-02-22 15:53 ` Hans de Goede [this message]
2014-02-22 15:53 ` [PATCH v7 07/15] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform Hans de Goede
2014-02-22 20:40   ` Tejun Heo
2014-02-22 15:53 ` [PATCH v7 08/15] ahci-imx: Port to library-ised ahci_platform Hans de Goede
2014-02-28 21:08   ` Russell King - ARM Linux
2014-03-01 10:38     ` Hans de Goede
2014-03-01 11:24       ` Russell King - ARM Linux
2014-03-01 12:54         ` Hans de Goede
2014-03-04 12:04   ` Bartlomiej Zolnierkiewicz
2014-02-22 15:53 ` [PATCH v7 09/15] ata: ahci_platform: Add DT compatible for Synopsis DWC AHCI controller Hans de Goede
2014-02-22 15:53 ` [PATCH v7 10/15] ata: ahci_platform: Update DT compatible list Hans de Goede
2014-02-22 15:53 ` [PATCH v7 11/15] ata: ahci_platform: Manage SATA PHY Hans de Goede
2014-02-22 15:53 ` [PATCH v7 12/15] ata: ahci_platform: runtime resume the device before use Hans de Goede
2014-02-22 15:53 ` [PATCH v7 13/15] ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators Hans de Goede
2014-02-22 21:44   ` Maxime Ripard
2014-02-23  8:03     ` Hans de Goede
2014-02-24  9:14       ` Maxime Ripard
2014-02-22 15:53 ` [PATCH v7 14/15] ARM: sun4i: dt: Add ahci / sata support Hans de Goede
2014-02-22 15:53 ` [PATCH v7 15/15] ARM: sun7i: " Hans de Goede
2014-02-22 16:26 ` [PATCH v7 00/15] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver Hans de Goede
2014-02-22 20:37   ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393084424-31099-7-git-send-email-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).