From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 00/22] Move DT kirkwood into mach-mvebu
Date: Sat, 22 Feb 2014 20:14:42 +0100 [thread overview]
Message-ID: <1393096504-11844-1-git-send-email-andrew@lunn.ch> (raw)
The process of making most kirkwood boards boot using DT is nearly
complete. We can now move these boards into mach-mvebu, freeing them
of the legacy code needed for none-DT systems. At the same time, they
can become part of ARCH_MULTI_V5.
This patchset can also be found in:
https://github.com/lunn/linux.git v3.14-rc1-mvebu-v4
Since v3:
Dropped the last patch removing DT support from mach-kirkwood. This
will help Debian until we complete moving all boards to DT and into
mach-mvebu. Also allow the DTB files to be compiled for both.
Added back the watchdog to the *_config files.
Added Tested-by's and Acked-by's
Since v2:
The L2 Cache binding has been re-written again. No more wt-override in
the binding, respect CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
Fixed a few typos in changelogs
Added a few Cc: for maintainers outside of the ARM world.
Added Acked-by:s
Since v1:
mv88f6281gtw_ge switch really does now use DT.
The L2 Cache binding has been re-written.
kirkwood.dtsi changes have been placed into there own patch.
Added mvebu_v5_defconfig
Fixed a few typos in changelogs
Added a few Cc:s
Andrew Lunn (22):
ARM: Kirkwood: Give pm.c its own header file.
irqchip: Orion: Fix getting generic chip pointer.
ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT
ARM: Kirkwood: Drop printing the SoC type and revision
ARM: Kirkwood: Seperate board-dt from common and pcie code.
ARM: Kirkwood: ioremap the cpu_config register before using it.
ARM: Kirkwood: ioremap memory control register
ARM: MVEBU: Add ARCH_MULTI_V7 to SoCs
ARM: Orion: Move cache-feroceon-l2.h out of plat-orion
ARM: MM: Add DT binding for Feroceon L2 cache
ARM: Kirkwood: Instantiate L2 cache from DT.
ARM: Fix default CPU selection for ARCH_MULTI_V5
ARM: Fix MULTI_TLB for feroceon
ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU
ARM: Move kirkwood DT boards into mach-mvebu
ARM: MVEBU: Let kirkwood use the system controller for restart
ARM: MVEBU: Instantiate system controller in kirkwood.dtsi
drivers: Enable building of Kirkwood drivers for mach-mvebu
ARM: MVEBU: Enable mvebu-soc-id on Kirkwood
ARM: config: Add a multi_v5_defconfig
ARM: MVEBU: Simplifiy headers and make local
ARM: config: Add mvebu_v5_defconfig
.../devicetree/bindings/arm/mrvl/feroceon.txt | 16 ++
arch/arm/Kconfig | 2 +-
arch/arm/boot/dts/Makefile | 9 +-
arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 62 +++++++
arch/arm/boot/dts/kirkwood.dtsi | 10 ++
arch/arm/configs/multi_v5_defconfig | 185 ++++++++++++++++++++
arch/arm/configs/mvebu_v5_defconfig | 172 +++++++++++++++++++
arch/arm/include/asm/hardware/cache-feroceon-l2.h | 13 ++
arch/arm/mach-kirkwood/Kconfig | 7 -
arch/arm/mach-kirkwood/Makefile | 4 +-
arch/arm/mach-kirkwood/board-dt.c | 108 ++++++++++--
arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c | 50 ------
arch/arm/mach-kirkwood/common.c | 3 +-
arch/arm/mach-kirkwood/common.h | 13 --
arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 2 +
arch/arm/mach-kirkwood/pm.c | 9 +-
arch/arm/mach-kirkwood/pm.h | 26 +++
arch/arm/mach-mv78xx0/common.c | 2 +-
arch/arm/mach-mvebu/Kconfig | 23 ++-
arch/arm/mach-mvebu/Makefile | 1 +
arch/arm/mach-mvebu/kirkwood-pm.c | 76 +++++++++
arch/arm/mach-mvebu/kirkwood-pm.h | 26 +++
arch/arm/mach-mvebu/kirkwood.c | 190 +++++++++++++++++++++
arch/arm/mach-mvebu/kirkwood.h | 22 +++
arch/arm/mach-mvebu/mvebu-soc-id.c | 1 +
arch/arm/mm/Kconfig | 2 +-
arch/arm/mm/cache-feroceon-l2.c | 45 ++++-
arch/arm/mm/proc-feroceon.S | 2 +-
arch/arm/mm/tlb-v4wbi.S | 3 +
.../plat-orion/include/plat/cache-feroceon-l2.h | 11 --
drivers/cpufreq/Kconfig.arm | 2 +-
drivers/cpuidle/Kconfig.arm | 2 +-
drivers/irqchip/irq-orion.c | 3 +-
drivers/leds/Kconfig | 4 +-
drivers/phy/Kconfig | 2 +-
drivers/thermal/Kconfig | 2 +-
sound/soc/kirkwood/Kconfig | 2 +-
37 files changed, 990 insertions(+), 122 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
create mode 100644 arch/arm/configs/multi_v5_defconfig
create mode 100644 arch/arm/configs/mvebu_v5_defconfig
create mode 100644 arch/arm/include/asm/hardware/cache-feroceon-l2.h
delete mode 100644 arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
create mode 100644 arch/arm/mach-kirkwood/pm.h
create mode 100644 arch/arm/mach-mvebu/kirkwood-pm.c
create mode 100644 arch/arm/mach-mvebu/kirkwood-pm.h
create mode 100644 arch/arm/mach-mvebu/kirkwood.c
create mode 100644 arch/arm/mach-mvebu/kirkwood.h
delete mode 100644 arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
--
1.8.5.3
next reply other threads:[~2014-02-22 19:14 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-22 19:14 Andrew Lunn [this message]
2014-02-22 19:14 ` [PATCH v4 01/22] ARM: Kirkwood: Give pm.c its own header file Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 02/22] irqchip: Orion: Fix getting generic chip pointer Andrew Lunn
2014-02-22 19:46 ` Jason Cooper
2014-02-22 19:14 ` [PATCH v4 03/22] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT Andrew Lunn
2014-02-22 19:50 ` Jason Cooper
2014-02-22 20:20 ` Andrew Lunn
2014-02-22 20:23 ` Jason Cooper
2014-02-22 19:14 ` [PATCH v4 04/22] ARM: Kirkwood: Drop printing the SoC type and revision Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 05/22] ARM: Kirkwood: Seperate board-dt from common and pcie code Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 06/22] ARM: Kirkwood: ioremap the cpu_config register before using it Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 07/22] ARM: Kirkwood: ioremap memory control register Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 08/22] ARM: MVEBU: Add ARCH_MULTI_V7 to SoCs Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 09/22] ARM: Orion: Move cache-feroceon-l2.h out of plat-orion Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 10/22] ARM: MM: Add DT binding for Feroceon L2 cache Andrew Lunn
2014-02-22 20:11 ` Jason Cooper
2014-02-22 19:14 ` [PATCH v4 11/22] ARM: Kirkwood: Instantiate L2 cache from DT Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 12/22] ARM: Fix default CPU selection for ARCH_MULTI_V5 Andrew Lunn
2014-02-22 19:58 ` Jason Cooper
2014-02-22 19:14 ` [PATCH v4 13/22] ARM: Fix MULTI_TLB for feroceon Andrew Lunn
2014-02-22 20:03 ` Jason Cooper
2014-02-22 19:14 ` [PATCH v4 14/22] ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 15/22] ARM: Move kirkwood DT boards into mach-mvebu Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 16/22] ARM: MVEBU: Let kirkwood use the system controller for restart Andrew Lunn
2014-02-22 19:14 ` [PATCH v4 17/22] ARM: MVEBU: Instantiate system controller in kirkwood.dtsi Andrew Lunn
2014-02-22 19:15 ` [PATCH v4 18/22] drivers: Enable building of Kirkwood drivers for mach-mvebu Andrew Lunn
2014-02-24 5:37 ` Viresh Kumar
2014-02-24 17:32 ` Jason Cooper
2014-03-27 17:35 ` Bryan Wu
2014-02-22 19:15 ` [PATCH v4 19/22] ARM: MVEBU: Enable mvebu-soc-id on Kirkwood Andrew Lunn
2014-02-22 19:15 ` [PATCH v4 20/22] ARM: config: Add a multi_v5_defconfig Andrew Lunn
2014-02-22 19:15 ` [PATCH v4 21/22] ARM: MVEBU: Simplifiy headers and make local Andrew Lunn
2014-02-22 19:15 ` [PATCH v4 22/22] ARM: config: Add mvebu_v5_defconfig Andrew Lunn
2014-02-22 22:16 ` [PATCH v4 00/22] Move DT kirkwood into mach-mvebu Jason Cooper
2014-02-23 11:14 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393096504-11844-1-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).