From mboxrd@z Thu Jan 1 00:00:00 1970 From: andrew@lunn.ch (Andrew Lunn) Date: Sun, 23 Feb 2014 18:19:38 +0100 Subject: [PATCH 0/4] mvebu support for kirkwood HP T5325 Message-ID: <1393175982-18516-1-git-send-email-andrew@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patchset adds support to mvebu for the HP T5325 thin client. This is the first kirkwood device using device tree which supports audio. However the audio codec is missing a device tree binding, and simple-audio-card does not yet quite support all the properties needed for this hardware. So C code is used for the audio devices. Andrew Lunn (4): ARM: Kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: Add i2c alias so setting bus number ARM: mvebu: Add HP T5325 thin client ARM: mvebu: Add HP T5325 devices to {multi|mvebu}_v5_defconfig arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-t5325.dts | 209 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/kirkwood.dtsi | 12 +- arch/arm/configs/multi_v5_defconfig | 9 ++ arch/arm/configs/mvebu_v5_defconfig | 9 ++ arch/arm/mach-mvebu/Kconfig | 7 ++ arch/arm/mach-mvebu/Makefile | 1 + arch/arm/mach-mvebu/board-t5325.c | 41 +++++++ arch/arm/mach-mvebu/board.h | 22 ++++ arch/arm/mach-mvebu/kirkwood.c | 11 +- 10 files changed, 320 insertions(+), 2 deletions(-) create mode 100644 arch/arm/boot/dts/kirkwood-t5325.dts create mode 100644 arch/arm/mach-mvebu/board-t5325.c create mode 100644 arch/arm/mach-mvebu/board.h -- 1.8.5.3