From mboxrd@z Thu Jan 1 00:00:00 1970 From: gsi@denx.de (Gerhard Sittig) Date: Mon, 24 Feb 2014 11:25:55 +0100 Subject: [PATCH 1/3] fs_enet: update clock names to comply with FEC binding Message-ID: <1393237557-31406-1-git-send-email-gsi@denx.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org a recent FEC binding document update that was motivated by i.MX development revealed that ARM and PowerPC implementations in Linux did not agree on the clock names to use for the FEC nodes change the OF clock lookup to prefer "ipg" over "per", which improves compliance with the binding, and keeps compatibility with former device trees Signed-off-by: Gerhard Sittig --- drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c index 62f042d4aaa9..ce20184b96cb 100644 --- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c +++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c @@ -1037,11 +1037,20 @@ static int fs_enet_probe(struct platform_device *ofdev) fpi->use_rmii = 1; } - /* make clock lookup non-fatal (the driver is shared among platforms), + /* the driver is shared across several PowerPC platforms, not all + * of them provide COMMON_CLK support, and newer kernels are supposed + * to keep working with older DT blobs, so clock lookup is non-fatal + * * but require enable to succeed when a clock was specified/found, * keep a reference to the clock upon successful acquisition + * + * the FEC binding is shared with ARM platforms, so we lookup several + * clock names to prefer the common naming convention yet support + * names that were used before unification */ - clk = devm_clk_get(&ofdev->dev, "per"); + clk = devm_clk_get(&ofdev->dev, "ipg"); + if (IS_ERR(clk)) + clk = devm_clk_get(&ofdev->dev, "per"); if (!IS_ERR(clk)) { err = clk_prepare_enable(clk); if (err) { -- 1.7.10.4