From: mpa@pengutronix.de (Markus Pargmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/15] ASoC: fsl-ssi: reorder and document fsl_ssi_private
Date: Wed, 26 Feb 2014 17:02:13 +0100 [thread overview]
Message-ID: <1393430538-32333-11-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1393430538-32333-1-git-send-email-mpa@pengutronix.de>
Reorder all variables in struct fsl_ssi_private to have groups that make
sense together. The patch also updates the struct documentation.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
sound/soc/fsl/fsl_ssi.c | 56 +++++++++++++++++++++++++++++++++++--------------
1 file changed, 40 insertions(+), 16 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 28bde80..f5e43bb 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -125,36 +125,60 @@ static const struct regmap_config fsl_ssi_regconfig = {
/**
* fsl_ssi_private: per-SSI private data
*
- * @ssi: pointer to the SSI's registers
- * @ssi_phys: physical address of the SSI registers
+ * @regs: Registers regmap pointer
* @irq: IRQ of this SSI
- * @playback: the number of playback streams opened
- * @capture: the number of capture streams opened
- * @cpu_dai: the CPU DAI for this device
- * @dev_attr: the sysfs device attribute structure
- * @stats: SSI statistics
+ * @cpu_dai_drv: CPU DAI driver for this device
+ *
+ * @hw_type: Hardware type this device is used in
+ * @dai_fmt: DAI configuration this device is currently used with
+ * @use_dma: DMA is used or FIQ with stream filter
+ * @use_dual_fifo: DMA with support for both FIFOs used
+ * @fifo_deph: Depth of the SSI FIFOs
+ * @rxtx_reg_val: Specific register settings for receive/transmit configuration
+ *
+ * @clk: SSI clock
+ * @baudclk: SSI baud clock for master mode
+ * @baudclk_locked: SSI baudclk is locked because it is in use
+ * @baudclk_lock: spinlock for baudclk_locked variable
+ *
+ * @dma_params_tx: DMA transmit parameters
+ * @dma_params_rx: DMA receive parameters
+ * @ssi_phys: physical address of the SSI registers
+ *
+ * @fiq_params: FIQ stream filtering parameters
+ *
+ * @pdev: Pointer to pdev used for deprecated fsl-ssi sound card
+ *
+ * @dbg_stats: Debugging statistics
*/
struct fsl_ssi_private {
struct regmap *regs;
- dma_addr_t ssi_phys;
unsigned int irq;
- unsigned int fifo_depth;
struct snd_soc_dai_driver cpu_dai_drv;
- struct platform_device *pdev;
- unsigned int dai_fmt;
enum fsl_ssi_type hw_type;
+ unsigned int dai_fmt;
bool use_dma;
- bool baudclk_locked;
bool use_dual_fifo;
- spinlock_t baudclk_lock;
- struct clk *baudclk;
+ unsigned int fifo_depth;
+ struct fsl_ssi_rxtx_reg_val rxtx_reg_val;
+
struct clk *clk;
+ struct clk *baudclk;
+ bool baudclk_locked;
+ spinlock_t baudclk_lock;
+
+ /* DMA params */
struct snd_dmaengine_dai_dma_data dma_params_tx;
struct snd_dmaengine_dai_dma_data dma_params_rx;
+ dma_addr_t ssi_phys;
+
+ /* params for non-dma FIQ stream filtered mode */
struct imx_pcm_fiq_params fiq_params;
- /* Register values for rx/tx configuration */
- struct fsl_ssi_rxtx_reg_val rxtx_reg_val;
+
+ /* Used when using fsl-ssi as sound-card. This is only used by ppc and
+ * should be replaced with simple-sound-card. */
+ struct platform_device *pdev;
struct fsl_ssi_dbg dbg_stats;
};
--
1.8.5.3
next prev parent reply other threads:[~2014-02-26 16:02 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-26 16:02 [PATCH 00/15] ASoC: fsl-ssi: Driver cleanup Markus Pargmann
2014-02-26 16:02 ` [PATCH 01/15] ASoC: fsl-ssi: Use regmap Markus Pargmann
2014-02-27 2:08 ` Li.Xiubo at freescale.com
2014-02-27 15:23 ` Markus Pargmann
2014-02-27 16:06 ` Timur Tabi
2014-03-05 6:21 ` Mark Brown
2014-03-05 7:04 ` Li.Xiubo at freescale.com
2014-03-05 7:07 ` Li.Xiubo at freescale.com
2014-02-26 16:02 ` [PATCH 02/15] ASoC: fsl-ssi: Remove fsl_ssi_setup Markus Pargmann
2014-02-26 16:02 ` [PATCH 03/15] ASoC: fsl-ssi: Move debugging to seperate file Markus Pargmann
2014-02-26 16:02 ` [PATCH 04/15] ASoC: fsl-ssi: Use dev_name for DAI driver struct Markus Pargmann
2014-02-26 16:02 ` [PATCH 05/15] ASoC: fsl-ssi: Move imx-specific probe to seperate function Markus Pargmann
2014-02-26 16:02 ` [PATCH 06/15] ASoC: fsl-ssi: Remove useless DMA code Markus Pargmann
2014-02-26 16:02 ` [PATCH 07/15] ASoC: fsl-ssi: baud clock error handling Markus Pargmann
2014-02-26 16:02 ` [PATCH 08/15] ASoC: fsl-ssi: Cleanup probe function Markus Pargmann
2014-02-26 16:02 ` [PATCH 09/15] ASoC: fsl-ssi: Remove unnecessary variables from ssi_private Markus Pargmann
2014-02-26 16:02 ` Markus Pargmann [this message]
2014-02-26 16:02 ` [PATCH 11/15] ASoC: fsl-ssi: Fix register values when disabling Markus Pargmann
2014-02-26 16:02 ` [PATCH 12/15] ASoC: fsl-ssi: Only enable baudclk when used Markus Pargmann
2014-02-26 16:02 ` [PATCH 13/15] ASoC: fsl-ssi: Set default dai-fmts Markus Pargmann
2014-02-26 16:02 ` [PATCH 14/15] ASoC: fsl-ssi: Transmit enable synchronization Markus Pargmann
2014-02-26 16:02 ` [PATCH 15/15] ASoC: fsl-ssi: Update binding documentation Markus Pargmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393430538-32333-11-git-send-email-mpa@pengutronix.de \
--to=mpa@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).