From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: config: Update msm_defconfig
Date: Wed, 26 Feb 2014 18:16:34 -0800 [thread overview]
Message-ID: <1393467394-10907-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1393467394-10907-1-git-send-email-sboyd@codeaurora.org>
Now that DT based platforms are split out of mach-msm into
mach-qcom, put back a non-DT based SoC into the msm_defconfig and
stop selecting unsupported drivers.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/configs/msm_defconfig | 25 +++----------------------
1 file changed, 3 insertions(+), 22 deletions(-)
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index c5858b9eb516..7f52dad97f51 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -17,21 +17,14 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_MSM_DT=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
-CONFIG_SMP=y
+CONFIG_ARCH_MSM=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_CLEANCACHE=y
-CONFIG_CC_STACKPROTECTOR=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
-CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
@@ -79,16 +72,12 @@ CONFIG_SERIO_LIBPS2=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MSM=y
+# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_MSM=y
CONFIG_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y
@@ -100,25 +89,17 @@ CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
-CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MSM=y
CONFIG_USB_ACM=y
CONFIG_USB_SERIAL=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_NEW_LEDS=y
CONFIG_RTC_CLASS=y
CONFIG_STAGING=y
-CONFIG_COMMON_CLK_QCOM=y
-CONFIG_MSM_GCC_8660=y
-CONFIG_MSM_MMCC_8960=y
-CONFIG_MSM_MMCC_8974=y
-CONFIG_MSM_IOMMU=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2014-02-27 2:16 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-27 2:16 [PATCH 0/3] Add qcom_defconfig and update msm_defconfig Stephen Boyd
2014-02-27 2:16 ` [PATCH 1/3] ARM: config: Add qcom_defconfig Stephen Boyd
2014-02-27 15:46 ` Josh Cartwright
2014-02-27 19:56 ` Stephen Boyd
2014-02-27 20:54 ` [PATCH v1.1/3] " Stephen Boyd
2014-02-27 2:16 ` [PATCH 2/3] ARM: msm: Silence readb/writeb warnings due to missing IOMEM() Stephen Boyd
2014-05-27 18:44 ` Olof Johansson
2014-02-27 2:16 ` Stephen Boyd [this message]
2014-02-27 22:14 ` [PATCH 3/3] ARM: config: Update msm_defconfig David Brown
2014-02-28 0:22 ` Kumar Gala
2014-05-27 18:05 ` Olof Johansson
2014-05-27 18:40 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393467394-10907-4-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).