* [PATCH 2/3] ARM: dts: vf610: i2c: Add eDMA support
@ 2014-02-27 6:06 Yuan Yao
2014-02-27 12:34 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Yuan Yao @ 2014-02-27 6:06 UTC (permalink / raw)
To: linux-arm-kernel
Add i2c dts node properties for eDMA support, them depend on the eDMA driver.
Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
---
arch/arm/boot/dts/vf610.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 91a7757..9d14a19 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -273,6 +273,9 @@
interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_I2C0>;
clock-names = "ipg";
+ dmas = <&edma0 0 50>,
+ <&edma0 0 51>;
+ dma-names = "rx","tx";
status = "disabled";
};
--
1.8.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 2/3] ARM: dts: vf610: i2c: Add eDMA support
2014-02-27 6:06 [PATCH 2/3] ARM: dts: vf610: i2c: Add eDMA support Yuan Yao
@ 2014-02-27 12:34 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2014-02-27 12:34 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Feb 27, 2014 at 02:06:19PM +0800, Yuan Yao wrote:
> Add i2c dts node properties for eDMA support, them depend on the eDMA driver.
>
> Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-02-27 12:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-27 6:06 [PATCH 2/3] ARM: dts: vf610: i2c: Add eDMA support Yuan Yao
2014-02-27 12:34 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).