From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/7] Add support for the Allwinner A31 DMA Controller
Date: Tue, 4 Mar 2014 17:17:57 +0100 [thread overview]
Message-ID: <1393949884-892-1-git-send-email-maxime.ripard@free-electrons.com> (raw)
Hi,
This patchset adds support for the DMA controller found in the
Allwinner A31 and A23 SoCs.
This has been tested using the newly introduced SPI driver on an A31
EVK. Support for DMA-driven SPI transfers will be the subject of
another patch serie.
Thanks,
Maxime
Changes from v2:
- Removed the clk_put calls in the clock protection functions
- Splitted out the sunxi machines into several files
- Moved the clock protection code into these new machine files
- Moved the PLL6 reparenting to the DMA driver
- Addressed various comments from Andy Shevchenko: switched to using
devm_kcalloc, used correct printk formats for physical and DMA
addresses, etc.
Changes from v1:
- Removed the clk_put call in the clocks protecting patches
- Minor fixes here and there as suggested by Andy Shevchenko: switch
to dmam_pool_create, switch to dev_dbg instead of pr_debug, etc.
Maxime Ripard (7):
clk: sunxi: Remove calls to clk_put
ARM: sunxi: Split out the various machines into separate files
ARM: sunxi: Move the clock protection to machine hooks
ARM: sun6i: Protect CPU clock
ARM: sun6i: Protect SDRAM gating bit
DMA: sun6i: Add driver for the Allwinner A31 DMA controller
ARM: sun6i: dt: Add A31 DMA controller to DTSI
.../devicetree/bindings/dma/sun6i-dma.txt | 45 +
arch/arm/boot/dts/sun6i-a31.dtsi | 29 +
arch/arm/mach-sunxi/Makefile | 6 +-
arch/arm/mach-sunxi/restart.c | 104 +++
arch/arm/mach-sunxi/restart.h | 20 +
arch/arm/mach-sunxi/sun4i.c | 45 +
arch/arm/mach-sunxi/sun5i.c | 51 ++
arch/arm/mach-sunxi/sun6i.c | 63 ++
arch/arm/mach-sunxi/sun7i.c | 50 ++
arch/arm/mach-sunxi/sunxi.c | 164 ----
drivers/clk/sunxi/clk-sunxi.c | 28 -
drivers/dma/Kconfig | 8 +
drivers/dma/Makefile | 1 +
drivers/dma/sun6i-dma.c | 979 +++++++++++++++++++++
14 files changed, 1400 insertions(+), 193 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/sun6i-dma.txt
create mode 100644 arch/arm/mach-sunxi/restart.c
create mode 100644 arch/arm/mach-sunxi/restart.h
create mode 100644 arch/arm/mach-sunxi/sun4i.c
create mode 100644 arch/arm/mach-sunxi/sun5i.c
create mode 100644 arch/arm/mach-sunxi/sun6i.c
create mode 100644 arch/arm/mach-sunxi/sun7i.c
delete mode 100644 arch/arm/mach-sunxi/sunxi.c
create mode 100644 drivers/dma/sun6i-dma.c
--
1.9.0
next reply other threads:[~2014-03-04 16:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-04 16:17 Maxime Ripard [this message]
2014-03-04 16:17 ` [PATCH v3 1/7] clk: sunxi: Remove calls to clk_put Maxime Ripard
2014-03-04 16:17 ` [PATCH v3 2/7] ARM: sunxi: Split out the various machines into separate files Maxime Ripard
2014-03-04 16:18 ` [PATCH v3 3/7] ARM: sunxi: Move the clock protection to machine hooks Maxime Ripard
2014-03-04 16:18 ` [PATCH v3 4/7] ARM: sun6i: Protect CPU clock Maxime Ripard
2014-03-04 16:18 ` [PATCH v3 5/7] ARM: sun6i: Protect SDRAM gating bit Maxime Ripard
2014-03-04 16:18 ` [PATCH v3 6/7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller Maxime Ripard
2014-03-05 14:07 ` Shevchenko, Andriy
2014-03-10 12:05 ` Maxime Ripard
2014-03-04 16:18 ` [PATCH v3 7/7] ARM: sun6i: dt: Add A31 DMA controller to DTSI Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393949884-892-1-git-send-email-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox