From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Thu, 6 Mar 2014 13:11:08 +0100 Subject: [PATCH] ARM: mvebu: add Device Tree for the Armada 385 RD board Message-ID: <1394107868-26094-1-git-send-email-gregory.clement@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The Armada 385 RD board is the reference design board from Marvell for the Armada 385 SoC. This commit adds a Device Tree description for this board, which enables the following features: * Network interfaces * I2C bus * Serial port * SPI bus, with a SPI flash * PCIe interface Signed-off-by: Gregory CLEMENT --- Hi, I have received this board only recently, so that why its device tree comes only now. This patch should not cause any trouble to other part of the kernel, so that's why I think it is reasonable to have it in 3.15. Thanks, Gregory arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/armada-385-rd.dts | 104 ++++++++++++++++++++++++++++++++++++ 2 files changed, 106 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/armada-385-rd.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f7d678808122..9155cf48e1b1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -153,7 +153,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-db.dtb + armada-385-db.dtb \ + armada-385-rd.dtb dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts new file mode 100644 index 000000000000..951bd91059e1 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-rd.dts @@ -0,0 +1,104 @@ +/* + * Device Tree file for Marvell Armada 385 Reference Design board + * (RD-88F6820-AP) + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +#include "armada-385.dtsi" + +/ { + model = "Marvell Armada 385 Reference Design"; + compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada38x"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256 MB */ + }; + + soc { + ranges = ; + + internal-regs { + spi at 10600 { + status = "okay"; + + spi-flash at 0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + }; + + i2c at 11000 { + status = "okay"; + clock-frequency = <100000>; + }; + + serial at 12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + + + /* + * The Ethernet nodes are not ordered by + * address on purpose. Indeed the first + * Ethernet port of the board (Giga0) is + * located at 0x70000 whereas the the second + * Ethernet(Giga 1) port is located at + * 0x30000. + */ + + ethernet at 70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii"; + }; + + ethernet at 30000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii"; + }; + + + mdio { + phy0: ethernet-phy at 0 { + reg = <0>; + }; + + phy1: ethernet-phy at 1 { + reg = <1>; + }; + }; + }; + + pcie-controller { + status = "okay"; + /* + * One PCIe units is accessible through + * standard PCIe slot on the board. + */ + pcie at 1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; + }; +}; -- 1.8.1.2