From: denis@eukrea.com (Denis Carikli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9][ 3/8] staging: imx-drm: Correct BGR666 and the board's dts that use them.
Date: Thu, 6 Mar 2014 17:01:42 +0100 [thread overview]
Message-ID: <1394121702-13257-3-git-send-email-denis@eukrea.com> (raw)
In-Reply-To: <1394121702-13257-1-git-send-email-denis@eukrea.com>
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
ChangeLog v7->v8:
- Shrinked even more the Cc list.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
- Added a better explanation of the change.
ChangeLog v5:
- New patch.
---
arch/arm/boot/dts/imx51-apf51dev.dts | 2 +-
arch/arm/boot/dts/imx53-m53evk.dts | 2 +-
drivers/staging/imx-drm/ipu-v3/ipu-dc.c | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index c29cfa9..bff3201 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -19,7 +19,7 @@
display at di1 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 0>;
- interface-pix-fmt = "bgr666";
+ interface-pix-fmt = "rgb666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index d939ba8..4250e74 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -24,7 +24,7 @@
display1: display at di1 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 1>;
- interface-pix-fmt = "bgr666";
+ interface-pix-fmt = "rgb666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-dc.c b/drivers/staging/imx-drm/ipu-v3/ipu-dc.c
index 6f9abe8..154d293 100644
--- a/drivers/staging/imx-drm/ipu-v3/ipu-dc.c
+++ b/drivers/staging/imx-drm/ipu-v3/ipu-dc.c
@@ -397,9 +397,9 @@ int ipu_dc_init(struct ipu_soc *ipu, struct device *dev,
/* bgr666 */
ipu_dc_map_clear(priv, IPU_DC_MAP_BGR666);
- ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 0, 5, 0xfc); /* blue */
+ ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 0, 17, 0xfc); /* blue */
ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 1, 11, 0xfc); /* green */
- ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 2, 17, 0xfc); /* red */
+ ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 2, 5, 0xfc); /* red */
/* bgr24 */
ipu_dc_map_clear(priv, IPU_DC_MAP_BGR24);
--
1.7.9.5
next prev parent reply other threads:[~2014-03-06 16:01 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-06 16:01 [PATCH v9][ 1/8] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format Denis Carikli
2014-03-06 16:01 ` [PATCH v9][ 2/8] staging: imx-drm: Add RGB666 support for parallel display Denis Carikli
2014-03-06 16:01 ` Denis Carikli [this message]
2014-03-06 16:04 ` [PATCH v9][ 4/8] imx-drm: Match ipu_di_signal_cfg's clk_pol with its description Denis Carikli
2014-03-06 16:04 ` [PATCH v9][ 5/8] staging: imx-drm: Use de-active and pixelclk-active display-timings Denis Carikli
2014-03-07 16:50 ` Russell King - ARM Linux
2014-03-06 16:04 ` [PATCH v9][ 6/8] staging: imx-drm: parallel display: add regulator support Denis Carikli
2014-03-06 16:29 ` Philipp Zabel
2014-03-06 16:33 ` Alexander Shiyan
2014-03-07 14:27 ` Lothar Waßmann
2014-03-06 16:04 ` [PATCH v9][ 7/8] ARM: dts: mbimx51sd: Add display support Denis Carikli
2014-03-06 16:26 ` Philipp Zabel
2014-03-12 16:40 ` Denis Carikli
2014-03-06 16:04 ` [PATCH v9][ 8/8] ARM: dts: mbimx51sd: Add CMO-QVGA backlight support Denis Carikli
2014-03-07 16:35 ` [PATCH v9][ 4/8] imx-drm: Match ipu_di_signal_cfg's clk_pol with its description Russell King - ARM Linux
2014-03-06 16:31 ` [PATCH v9][ 3/8] staging: imx-drm: Correct BGR666 and the board's dts that use them Philipp Zabel
2014-03-12 11:43 ` Lothar Waßmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394121702-13257-3-git-send-email-denis@eukrea.com \
--to=denis@eukrea.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).