From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (Kishon Vijay Abraham I) Date: Fri, 7 Mar 2014 13:55:30 +0530 Subject: [PATCH v4] phy: omap-control: update dra7 and am437 usb2 Documentation bindings In-Reply-To: <53189742.3060705@ti.com> References: <53189742.3060705@ti.com> Message-ID: <1394121786-28193-1-git-send-email-balbi@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Felipe Balbi From: Roger Quadros The dra7-usb2 and am437-usb2 bindings have not yet been used. Change them to be more elegant. Acked-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- Changes from v3: * changed the compatible name to 'ti,control-phy-usb2-dra7' and 'ti,control-phy-usb2-am437' Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 41dc132..8694aae 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -9,9 +9,9 @@ Required properties: e.g. USB2_PHY on OMAP5. "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control e.g. USB3 PHY and SATA PHY on OMAP5. - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on + "ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on DRA7 platform. - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on + "ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on AM437 platform. - reg : Address and length of the register set for the device. It contains the address of "otghs_control" for control-phy-otghs or "power" register -- 1.9.0