[PATCH v9][ 8/8] ARM: dts: mbimx51sd: Add CMO-QVGA backlight support.

[denis@eukrea.com (Denis Carikli)]

Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.

ChangeLog v6->v7:
- Shrinked even more the Cc list.

ChangeLog v5->v6:
- Reordered the Cc list.

ChangeLog v3->v5:
- Updated to the new GPIO defines.

ChangeLog v2->v3:
- Splitted out from the patch that added support for the cpuimx51/mbimxsd51 boards.
- This patch now only adds backlight support.
- Added some interested people in the Cc list, and removed some people that
  might be annoyed by the receiving of that patch which is unrelated to their
  subsystem.
---
 .../imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts  |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts
index dbf1083..59c6038 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts
@@ -17,6 +17,15 @@
 	model = "Eukrea MBIMXSD51 with the CMO-QVGA Display";
 	compatible = "eukrea,mbimxsd51-baseboard-cmo-qvga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51";
 
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_1>;
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-brightness-level = <1>;
+		default-on;
+	};
+
 	reg_lcd_3v3: lcd-en {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
-- 
1.7.9.5