From: wsa@the-dreams.de (Wolfram Sang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 09/12] ARM: shmobile: r7s72100: add i2c clocks to dtsi
Date: Fri, 7 Mar 2014 17:00:45 +0100 [thread overview]
Message-ID: <1394208048-32495-10-git-send-email-wsa@the-dreams.de> (raw)
In-Reply-To: <1394208048-32495-1-git-send-email-wsa@the-dreams.de>
From: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
---
arch/arm/boot/dts/r7s72100.dtsi | 15 +++++++++++++++
include/dt-bindings/clock/r7s72100-clock.h | 6 ++++++
2 files changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index d49afe30c1d7..9f7a06dc5e30 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -118,6 +118,17 @@
>;
clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
};
+
+ mstp9_clks: mstp9_clks at fcfe0438 {
+ #clock-cells = <1>;
+ compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xfcfe0438 4>;
+ clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>;
+ renesas,clock-indices = <
+ R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
+ >;
+ clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
+ };
};
cpus {
@@ -153,6 +164,7 @@
<0 162 IRQ_TYPE_LEVEL_HIGH>,
<0 163 IRQ_TYPE_LEVEL_HIGH>,
<0 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
clock-frequency = <100000>;
status = "disabled";
};
@@ -170,6 +182,7 @@
<0 170 IRQ_TYPE_LEVEL_HIGH>,
<0 171 IRQ_TYPE_LEVEL_HIGH>,
<0 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
clock-frequency = <100000>;
status = "disabled";
};
@@ -187,6 +200,7 @@
<0 178 IRQ_TYPE_LEVEL_HIGH>,
<0 179 IRQ_TYPE_LEVEL_HIGH>,
<0 180 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
clock-frequency = <100000>;
status = "disabled";
};
@@ -204,6 +218,7 @@
<0 186 IRQ_TYPE_LEVEL_HIGH>,
<0 187 IRQ_TYPE_LEVEL_HIGH>,
<0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
clock-frequency = <100000>;
status = "disabled";
};
diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h
index d0e2d91025c2..b412bb2c93b1 100644
--- a/include/dt-bindings/clock/r7s72100-clock.h
+++ b/include/dt-bindings/clock/r7s72100-clock.h
@@ -24,4 +24,10 @@
#define R7S72100_CLK_SCIF6 1
#define R7S72100_CLK_SCIF7 0
+/* MSTP9 */
+#define R7S72100_CLK_I2C0 7
+#define R7S72100_CLK_I2C1 6
+#define R7S72100_CLK_I2C2 5
+#define R7S72100_CLK_I2C3 4
+
#endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */
--
1.9.0
next prev parent reply other threads:[~2014-03-07 16:00 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-07 16:00 [PATCH V3 00/12] CCF support for Renesas r7s72100 Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 01/12] clk: shmobile: add CPG driver for rz-platforms Wolfram Sang
2014-03-21 1:26 ` Mike Turquette
2014-03-07 16:00 ` [PATCH V3 02/12] ARM: shmobile: r7s72100: document MSTP clock support Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 03/12] ARM: shmobile: r7s72100: add essential clock nodes to dtsi Wolfram Sang
2014-03-07 16:22 ` Ben Dooks
2014-03-07 16:33 ` Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 04/12] ARM: shmobile: r7s72100: genmai: populate nodes for external clocks Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 05/12] ARM: shmobile: r7s72100: use workaround for non DT-clocks Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 06/12] ARM: shmobile: r7s72100: add scif nodes to dtsi Wolfram Sang
2014-03-07 16:13 ` Laurent Pinchart
2014-03-07 16:25 ` Wolfram Sang
2014-03-07 16:37 ` Laurent Pinchart
2014-03-07 16:44 ` Wolfram Sang
2014-03-07 16:48 ` Laurent Pinchart
2014-03-07 16:48 ` Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 07/12] ARM: shmobile: r7s72100: genmai: activate scif2 for console output Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 08/12] ARM: shmobile: r7s72100: genmai: platform scif devices only for legacy support Wolfram Sang
2014-03-07 16:00 ` Wolfram Sang [this message]
2014-03-07 16:00 ` [PATCH V3 10/12] ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock support Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 11/12] ARM: shmobile: r7s72100: add spi clocks to dtsi Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 12/12] ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock support Wolfram Sang
2014-03-07 16:14 ` [PATCH V3 00/12] CCF support for Renesas r7s72100 Laurent Pinchart
2014-03-07 16:29 ` Wolfram Sang
2014-03-07 16:36 ` Laurent Pinchart
2014-03-07 16:47 ` Wolfram Sang
2014-03-07 16:59 ` Laurent Pinchart
2014-03-10 7:27 ` Wolfram Sang
2014-03-10 11:59 ` Laurent Pinchart
2014-03-27 6:46 ` Wolfram Sang
2014-03-27 10:56 ` Laurent Pinchart
2014-03-27 11:36 ` Wolfram Sang
2014-03-27 12:50 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394208048-32495-10-git-send-email-wsa@the-dreams.de \
--to=wsa@the-dreams.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).