[PATCH v3 5/5] ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap

[mporter@linaro.org (Matt Porter)]

Add a dtsi to support the BCM590xx PMUs used by the BCM281xx family
of SoCs. Enable regulators for use with the dwc2 and sdhci on
bcm28155-ap.

Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
---
 arch/arm/boot/dts/bcm28155-ap.dts | 47 +++++++++++++++++++++++-
 arch/arm/boot/dts/bcm59056.dtsi   | 77 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 123 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/bcm59056.dtsi

diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 5ff2382..99ff0c1 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -46,7 +46,11 @@
 
 	i2c at 3500d000 {
 		status="okay";
-		clock-frequency = <400000>;
+		clock-frequency = <100000>;
+
+		pmu: pmu at 8 {
+			reg = <0x08>;
+		};
 	};
 
 	sdio1: sdio at 3f180000 {
@@ -57,16 +61,22 @@
 	sdio2: sdio at 3f190000 {
 		non-removable;
 		max-frequency = <48000000>;
+		vmmc-supply = <&camldo1_reg>;
+		vqmmc-supply = <&iosr1_reg>;
 		status = "okay";
 	};
 
 	sdio4: sdio at 3f1b0000 {
 		max-frequency = <48000000>;
 		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		vmmc-supply = <&sdldo_reg>;
+		vqmmc-supply = <&sdxldo_reg>;
 		status = "okay";
 	};
 
 	usbotg: usb at 3f120000 {
+		vusb_d-supply = <&usbldo_reg>;
+		vusb_a-supply = <&iosr1_reg>;
 		status = "okay";
 	};
 
@@ -74,3 +84,38 @@
 		status = "okay";
 	};
 };
+
+#include "bcm59056.dtsi"
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+	regulators {
+		camldo1_reg: camldo1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		sdldo_reg: sdldo {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		sdxldo_reg: sdxldo {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		usbldo_reg: usbldo {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		iosr1_reg: iosr1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
new file mode 100644
index 0000000..0fa1577
--- /dev/null
+++ b/arch/arm/boot/dts/bcm59056.dtsi
@@ -0,0 +1,77 @@
+/*
+* Copyright 2014 Linaro Limited
+* Author: Matt Porter <mporter@linaro.org>
+*
+* This program is free software; you can redistribute it and/or modify it
+* under  the terms of the GNU General  Public License as published by the
+* Free Software Foundation;  either version 2 of the License, or (at your
+* option) any later version.
+*/
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rfldo_reg: rfldo {
+		};
+
+		camldo1_reg: camldo1 {
+		};
+
+		camldo2_reg: camldo2 {
+		};
+
+		simldo1_reg: simldo1 {
+		};
+
+		simldo2_reg: simldo2 {
+		};
+
+		sdldo_reg: sdldo {
+		};
+
+		sdxldo_reg: sdxldo {
+		};
+
+		mmcldo1_reg: mmcldo1 {
+		};
+
+		mmcldo2_reg: mmcldo2 {
+		};
+
+		audldo_reg: audldo {
+		};
+
+		micldo_reg: micldo {
+		};
+
+		usbldo_reg: usbldo {
+		};
+
+		vibldo_reg: vibldo {
+		};
+
+		csr_reg: csr {
+		};
+
+		iosr1_reg: iosr1 {
+		};
+
+		iosr2_reg: iosr2 {
+		};
+
+		msr_reg: msr {
+		};
+
+		sdsr1_reg: sdsr1 {
+		};
+
+		sdsr2_reg: sdsr2 {
+		};
+
+		vsr_reg: vsr {
+		};
+	};
+};
-- 
1.8.4