linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mpa@pengutronix.de (Markus Pargmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/16] ASoC: fsl-ssi: reorder and document fsl_ssi_private
Date: Sat, 15 Mar 2014 13:44:18 +0100	[thread overview]
Message-ID: <1394887464-969-11-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1394887464-969-1-git-send-email-mpa@pengutronix.de>

Reorder all variables in struct fsl_ssi_private to have groups that make
sense together. The patch also updates the struct documentation.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 sound/soc/fsl/fsl_ssi.c | 61 +++++++++++++++++++++++++++++++++++--------------
 1 file changed, 44 insertions(+), 17 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 126f277..c8002d3 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -135,37 +135,64 @@ struct fsl_ssi_rxtx_reg_val {
 /**
  * fsl_ssi_private: per-SSI private data
  *
- * @ssi: pointer to the SSI's registers
- * @ssi_phys: physical address of the SSI registers
+ * @regs: Registers regmap pointer
  * @irq: IRQ of this SSI
- * @playback: the number of playback streams opened
- * @capture: the number of capture streams opened
- * @cpu_dai: the CPU DAI for this device
- * @dev_attr: the sysfs device attribute structure
- * @stats: SSI statistics
+ * @cpu_dai_drv: CPU DAI driver for this device
+ *
+ * @hw_type: Hardware type this device is used in
+ * @dai_fmt: DAI configuration this device is currently used with
+ * @i2s_mode: i2s and network mode configuration of the device. Is used to
+ * switch between normal and i2s/network mode
+ * mode depending on the number of channels
+ * @use_dma: DMA is used or FIQ with stream filter
+ * @use_dual_fifo: DMA with support for both FIFOs used
+ * @fifo_deph: Depth of the SSI FIFOs
+ * @rxtx_reg_val: Specific register settings for receive/transmit configuration
+ *
+ * @clk: SSI clock
+ * @baudclk: SSI baud clock for master mode
+ * @baudclk_locked: SSI baudclk is locked because it is in use
+ * @baudclk_lock: spinlock for baudclk_locked variable
+ *
+ * @dma_params_tx: DMA transmit parameters
+ * @dma_params_rx: DMA receive parameters
+ * @ssi_phys: physical address of the SSI registers
+ *
+ * @fiq_params: FIQ stream filtering parameters
+ *
+ * @pdev: Pointer to pdev used for deprecated fsl-ssi sound card
+ *
+ * @dbg_stats: Debugging statistics
  */
 struct fsl_ssi_private {
 	struct ccsr_ssi __iomem *ssi;
-	dma_addr_t ssi_phys;
 	unsigned int irq;
-	unsigned int fifo_depth;
 	struct snd_soc_dai_driver cpu_dai_drv;
-	struct platform_device *pdev;
-	unsigned int dai_fmt;
 
 	enum fsl_ssi_type hw_type;
+	unsigned int dai_fmt;
+	u8 i2s_mode;
 	bool use_dma;
-	bool baudclk_locked;
 	bool use_dual_fifo;
-	u8 i2s_mode;
-	spinlock_t baudclk_lock;
-	struct clk *baudclk;
+	unsigned int fifo_depth;
+	struct fsl_ssi_rxtx_reg_val rxtx_reg_val;
+
 	struct clk *clk;
+	struct clk *baudclk;
+	bool baudclk_locked;
+	spinlock_t baudclk_lock;
+
+	/* DMA params */
 	struct snd_dmaengine_dai_dma_data dma_params_tx;
 	struct snd_dmaengine_dai_dma_data dma_params_rx;
+	dma_addr_t ssi_phys;
+
+	/* params for non-dma FIQ stream filtered mode */
 	struct imx_pcm_fiq_params fiq_params;
-	/* Register values for rx/tx configuration */
-	struct fsl_ssi_rxtx_reg_val rxtx_reg_val;
+
+	/* Used when using fsl-ssi as sound-card. This is only used by ppc and
+	 * should be replaced with simple-sound-card. */
+	struct platform_device *pdev;
 
 	struct fsl_ssi_dbg dbg_stats;
 };
-- 
1.9.0

  parent reply	other threads:[~2014-03-15 12:44 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-15 12:44 [PATCH v2 00/16] ASoC: fsl-ssi: Driver cleanup Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 01/16] ASoC: fsl-ssi: Remove fsl_ssi_setup Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 02/16] ASoC: fsl-ssi: Fix i2s_mode variable setup Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 03/16] ASoC: fsl-ssi: Move debugging to seperate file Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 04/16] ASoC: fsl-ssi: Use dev_name for DAI driver struct Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 05/16] ASoC: fsl-ssi: Move imx-specific probe to seperate function Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 06/16] ASoC: fsl-ssi: Remove useless DMA code Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 07/16] ASoC: fsl-ssi: baud clock error handling Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 08/16] ASoC: fsl-ssi: Cleanup probe function Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 09/16] ASoC: fsl-ssi: Remove unnecessary variables from ssi_private Markus Pargmann
2014-03-15 12:44 ` Markus Pargmann [this message]
2014-03-15 12:44 ` [PATCH v2 11/16] ASoC: fsl-ssi: Fix register values when disabling Markus Pargmann
2014-04-03 22:11   ` Mark Brown
2014-04-04  6:52     ` Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 12/16] ASoC: fsl-ssi: Only enable baudclk when used Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 13/16] ASoC: fsl-ssi: Set default dai-fmts Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 14/16] ASoC: fsl-ssi: Transmit enable synchronization Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 15/16] ASoC: fsl-ssi: Update binding documentation Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 16/16] ASoC: fsl-ssi: Use regmap Markus Pargmann
2014-03-15 14:43   ` Alexander Shiyan
2014-03-18  8:10     ` Markus Pargmann
2014-03-20  6:07       ` Li.Xiubo at freescale.com
2014-03-20 15:10         ` Timur Tabi
2014-03-21  1:52           ` Li.Xiubo at freescale.com
2014-03-21  8:45           ` Markus Pargmann
2014-03-21  9:19             ` Li.Xiubo at freescale.com
2014-03-18 12:44 ` [PATCH v2 00/16] ASoC: fsl-ssi: Driver cleanup Mark Brown
2014-04-03 22:14 ` Mark Brown
2014-04-04  6:49   ` Markus Pargmann
2014-04-04  7:58     ` [alsa-devel] " Michael Trimarchi
2014-04-04 10:59       ` Markus Pargmann
2014-04-04 12:59         ` Michael Trimarchi
2014-04-04 10:03     ` Mark Brown
2014-04-04 10:51       ` Markus Pargmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1394887464-969-11-git-send-email-mpa@pengutronix.de \
    --to=mpa@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).