From: mpa@pengutronix.de (Markus Pargmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 08/16] ASoC: fsl-ssi: Cleanup probe function
Date: Sat, 15 Mar 2014 13:44:16 +0100 [thread overview]
Message-ID: <1394887464-969-9-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1394887464-969-1-git-send-email-mpa@pengutronix.de>
Reorder the probe function to be able to move the second imx-specific
block to the seperate imx probe function. The patch also removes some
comments/variables/code that are not used anymore or could be simply
replaced by other variables.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
sound/soc/fsl/fsl_ssi.c | 109 ++++++++++++++++++++++--------------------------
1 file changed, 49 insertions(+), 60 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 663ac8b..b0c04ef 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -159,7 +159,6 @@ struct fsl_ssi_private {
bool imx_ac97;
bool use_dma;
bool baudclk_locked;
- bool irq_stats;
bool offline_config;
bool use_dual_fifo;
u8 i2s_mode;
@@ -961,7 +960,7 @@ static void make_lowercase(char *s)
}
static int fsl_ssi_imx_probe(struct platform_device *pdev,
- struct fsl_ssi_private *ssi_private)
+ struct fsl_ssi_private *ssi_private, void __iomem *iomem)
{
struct device_node *np = pdev->dev.of_node;
u32 dmas[4];
@@ -1019,8 +1018,37 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
ssi_private->dma_params_rx.maxburst &= ~0x1;
}
+ if (!ssi_private->use_dma) {
+
+ /*
+ * Some boards use an incompatible codec. To get it
+ * working, we are using imx-fiq-pcm-audio, that
+ * can handle those codecs. DMA is not possible in this
+ * situation.
+ */
+
+ ssi_private->fiq_params.irq = ssi_private->irq;
+ ssi_private->fiq_params.base = iomem;
+ ssi_private->fiq_params.dma_params_rx =
+ &ssi_private->dma_params_rx;
+ ssi_private->fiq_params.dma_params_tx =
+ &ssi_private->dma_params_tx;
+
+ ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params);
+ if (ret)
+ goto error_pcm;
+ } else {
+ ret = imx_pcm_dma_init(pdev);
+ if (ret)
+ goto error_pcm;
+ }
+
return 0;
+error_pcm:
+ if (!IS_ERR(ssi_private->baudclk))
+ clk_disable_unprepare(ssi_private->baudclk);
+
error_baud_clk:
clk_disable_unprepare(ssi_private->clk);
@@ -1030,6 +1058,8 @@ error_baud_clk:
static void fsl_ssi_imx_clean(struct platform_device *pdev,
struct fsl_ssi_private *ssi_private)
{
+ if (!ssi_private->use_dma)
+ imx_pcm_fiq_exit(pdev);
if (!IS_ERR(ssi_private->baudclk))
clk_disable_unprepare(ssi_private->baudclk);
clk_disable_unprepare(ssi_private->clk);
@@ -1039,7 +1069,6 @@ static int fsl_ssi_probe(struct platform_device *pdev)
{
struct fsl_ssi_private *ssi_private;
int ret = 0;
- struct device_attribute *dev_attr = NULL;
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *of_id;
enum fsl_ssi_type hw_type;
@@ -1132,6 +1161,8 @@ static int fsl_ssi_probe(struct platform_device *pdev)
ssi_private->baudclk_locked = false;
spin_lock_init(&ssi_private->baudclk_lock);
+ dev_set_drvdata(&pdev->dev, ssi_private);
+
/*
* imx51 and later SoCs have a slightly different IP that allows the
* SSI configuration while the SSI unit is running.
@@ -1162,20 +1193,22 @@ static int fsl_ssi_probe(struct platform_device *pdev)
hw_type == FSL_SSI_MX35) {
ssi_private->ssi_on_imx = true;
- ret = fsl_ssi_imx_probe(pdev, ssi_private);
+ ret = fsl_ssi_imx_probe(pdev, ssi_private, ssi_private->ssi);
if (ret)
goto error_irqmap;
}
- /*
- * Enable interrupts only for MCP8610 and MX51. The other MXs have
- * different writeable interrupt status registers.
- */
+ ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component,
+ &ssi_private->cpu_dai_drv, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
+ goto error_asoc_register;
+ }
+
if (ssi_private->use_dma) {
ret = devm_request_irq(&pdev->dev, ssi_private->irq,
fsl_ssi_isr, 0, ssi_private->name,
ssi_private);
- ssi_private->irq_stats = true;
if (ret < 0) {
dev_err(&pdev->dev, "could not claim irq %u\n",
ssi_private->irq);
@@ -1183,46 +1216,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
}
}
- /* Register with ASoC */
- dev_set_drvdata(&pdev->dev, ssi_private);
-
- ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component,
- &ssi_private->cpu_dai_drv, 1);
- if (ret) {
- dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
- goto error_dev;
- }
-
ret = fsl_ssi_debugfs_create(&ssi_private->dbg_stats, &pdev->dev);
if (ret)
- goto error_dbgfs;
-
- if (ssi_private->ssi_on_imx) {
- if (!ssi_private->use_dma) {
-
- /*
- * Some boards use an incompatible codec. To get it
- * working, we are using imx-fiq-pcm-audio, that
- * can handle those codecs. DMA is not possible in this
- * situation.
- */
-
- ssi_private->fiq_params.irq = ssi_private->irq;
- ssi_private->fiq_params.base = ssi_private->ssi;
- ssi_private->fiq_params.dma_params_rx =
- &ssi_private->dma_params_rx;
- ssi_private->fiq_params.dma_params_tx =
- &ssi_private->dma_params_tx;
-
- ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params);
- if (ret)
- goto error_pcm;
- } else {
- ret = imx_pcm_dma_init(pdev);
- if (ret)
- goto error_pcm;
- }
- }
+ goto error_asoc_register;
/*
* If codec-handle property is missing from SSI node, we assume
@@ -1252,32 +1248,25 @@ static int fsl_ssi_probe(struct platform_device *pdev)
if (IS_ERR(ssi_private->pdev)) {
ret = PTR_ERR(ssi_private->pdev);
dev_err(&pdev->dev, "failed to register platform: %d\n", ret);
- goto error_dai;
+ goto error_sound_card;
}
done:
return 0;
-error_dai:
- if (ssi_private->ssi_on_imx && !ssi_private->use_dma)
- imx_pcm_fiq_exit(pdev);
-
-error_pcm:
+error_sound_card:
fsl_ssi_debugfs_remove(&ssi_private->dbg_stats);
-error_dbgfs:
+error_irq:
snd_soc_unregister_component(&pdev->dev);
-error_dev:
- device_remove_file(&pdev->dev, dev_attr);
-
-error_irq:
+error_asoc_register:
if (ssi_private->ssi_on_imx) {
fsl_ssi_imx_clean(pdev, ssi_private);
}
error_irqmap:
- if (ssi_private->irq_stats)
+ if (ssi_private->use_dma)
irq_dispose_mapping(ssi_private->irq);
return ret;
@@ -1296,7 +1285,7 @@ static int fsl_ssi_remove(struct platform_device *pdev)
if (ssi_private->ssi_on_imx)
fsl_ssi_imx_clean(pdev, ssi_private);
- if (ssi_private->irq_stats)
+ if (ssi_private->use_dma)
irq_dispose_mapping(ssi_private->irq);
return 0;
--
1.9.0
next prev parent reply other threads:[~2014-03-15 12:44 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-15 12:44 [PATCH v2 00/16] ASoC: fsl-ssi: Driver cleanup Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 01/16] ASoC: fsl-ssi: Remove fsl_ssi_setup Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 02/16] ASoC: fsl-ssi: Fix i2s_mode variable setup Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 03/16] ASoC: fsl-ssi: Move debugging to seperate file Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 04/16] ASoC: fsl-ssi: Use dev_name for DAI driver struct Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 05/16] ASoC: fsl-ssi: Move imx-specific probe to seperate function Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 06/16] ASoC: fsl-ssi: Remove useless DMA code Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 07/16] ASoC: fsl-ssi: baud clock error handling Markus Pargmann
2014-03-15 12:44 ` Markus Pargmann [this message]
2014-03-15 12:44 ` [PATCH v2 09/16] ASoC: fsl-ssi: Remove unnecessary variables from ssi_private Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 10/16] ASoC: fsl-ssi: reorder and document fsl_ssi_private Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 11/16] ASoC: fsl-ssi: Fix register values when disabling Markus Pargmann
2014-04-03 22:11 ` Mark Brown
2014-04-04 6:52 ` Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 12/16] ASoC: fsl-ssi: Only enable baudclk when used Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 13/16] ASoC: fsl-ssi: Set default dai-fmts Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 14/16] ASoC: fsl-ssi: Transmit enable synchronization Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 15/16] ASoC: fsl-ssi: Update binding documentation Markus Pargmann
2014-03-15 12:44 ` [PATCH v2 16/16] ASoC: fsl-ssi: Use regmap Markus Pargmann
2014-03-15 14:43 ` Alexander Shiyan
2014-03-18 8:10 ` Markus Pargmann
2014-03-20 6:07 ` Li.Xiubo at freescale.com
2014-03-20 15:10 ` Timur Tabi
2014-03-21 1:52 ` Li.Xiubo at freescale.com
2014-03-21 8:45 ` Markus Pargmann
2014-03-21 9:19 ` Li.Xiubo at freescale.com
2014-03-18 12:44 ` [PATCH v2 00/16] ASoC: fsl-ssi: Driver cleanup Mark Brown
2014-04-03 22:14 ` Mark Brown
2014-04-04 6:49 ` Markus Pargmann
2014-04-04 7:58 ` [alsa-devel] " Michael Trimarchi
2014-04-04 10:59 ` Markus Pargmann
2014-04-04 12:59 ` Michael Trimarchi
2014-04-04 10:03 ` Mark Brown
2014-04-04 10:51 ` Markus Pargmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394887464-969-9-git-send-email-mpa@pengutronix.de \
--to=mpa@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).