From mboxrd@z Thu Jan 1 00:00:00 1970 From: mpa@pengutronix.de (Markus Pargmann) Date: Sat, 15 Mar 2014 14:07:40 +0100 Subject: [PATCH v2 1/5] net: cpsw: document mac-address being optional In-Reply-To: <1394888864-11007-1-git-send-email-mpa@pengutronix.de> References: <1394888864-11007-1-git-send-email-mpa@pengutronix.de> Message-ID: <1394888864-11007-2-git-send-email-mpa@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org mac-address is an optional property. If no mac-address is set, a random mac-address will be generated. Signed-off-by: Markus Pargmann --- Documentation/devicetree/bindings/net/cpsw.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index 05d660e..c39f077 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -30,10 +30,10 @@ Required properties: - phy_id : Specifies slave phy id - phy-mode : The interface between the SoC and the PHY (a string that of_get_phy_mode() can understand) -- mac-address : Specifies slave MAC address Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports +- mac-address : Specifies slave MAC address Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration. -- 1.9.0