From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 09/36] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID
Date: Thu, 20 Mar 2014 09:20:41 +0000 [thread overview]
Message-ID: <1395307268-12721-10-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1395307268-12721-1-git-send-email-lee.jones@linaro.org>
Using previously added infrastructure we can now extract a device's JEDEC
ID, compare it to a list of known and supported devices and make assumptions
based on known characteristics of a given chip.
Acked-by Angus Clark <angus.clark@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/devices/st_spi_fsm.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 29da522..9467585 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -204,6 +204,7 @@ struct stfsm {
struct resource *region;
struct mtd_info mtd;
struct mutex lock;
+ struct flash_info *info;
uint32_t fifo_dir_delay;
};
@@ -477,6 +478,7 @@ static void stfsm_read_jedec(struct stfsm *fsm, uint8_t *const jedec)
static struct flash_info *stfsm_jedec_probe(struct stfsm *fsm)
{
+ struct flash_info *info;
u16 ext_jedec;
u32 jedec;
u8 id[5];
@@ -494,6 +496,15 @@ static struct flash_info *stfsm_jedec_probe(struct stfsm *fsm)
dev_dbg(fsm->dev, "JEDEC = 0x%08x [%02x %02x %02x %02x %02x]\n",
jedec, id[0], id[1], id[2], id[3], id[4]);
+ for (info = flash_types; info->name; info++) {
+ if (info->jedec_id == jedec) {
+ if (info->ext_id && info->ext_id != ext_jedec)
+ continue;
+ return info;
+ }
+ }
+ dev_err(fsm->dev, "Unrecognized JEDEC id %06x\n", jedec);
+
return NULL;
}
@@ -588,6 +599,7 @@ static int stfsm_init(struct stfsm *fsm)
static int stfsm_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct flash_info *info;
struct resource *res;
struct stfsm *fsm;
int ret;
@@ -627,13 +639,25 @@ static int stfsm_probe(struct platform_device *pdev)
}
/* Detect SPI FLASH device */
- stfsm_jedec_probe(fsm);
+ info = stfsm_jedec_probe(fsm);
+ if (!info)
+ return -ENODEV;
+ fsm->info = info;
fsm->mtd.dev.parent = &pdev->dev;
fsm->mtd.type = MTD_NORFLASH;
fsm->mtd.writesize = 4;
fsm->mtd.writebufsize = fsm->mtd.writesize;
fsm->mtd.flags = MTD_CAP_NORFLASH;
+ fsm->mtd.size = info->sector_size * info->n_sectors;
+ fsm->mtd.erasesize = info->sector_size;
+
+ dev_err(&pdev->dev,
+ "Found serial flash device: %s\n"
+ " size = %llx (%lldMiB) erasesize = 0x%08x (%uKiB)\n",
+ info->name,
+ (long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20),
+ fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));
return mtd_device_parse_register(&fsm->mtd, NULL, NULL, NULL, 0);
}
--
1.8.3.2
next prev parent reply other threads:[~2014-03-20 9:20 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-20 9:20 [PATCH v6 00/36] mtd: st_spi_fsm: Add new driver Lee Jones
2014-03-20 9:20 ` [PATCH v6 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework Lee Jones
2014-04-07 8:12 ` Paul Bolle
2014-04-07 9:11 ` Lee Jones
2014-04-07 9:41 ` Paul Bolle
2014-04-07 11:08 ` Lee Jones
2014-03-20 9:20 ` [PATCH v6 02/36] mtd: st_spi_fsm: Supply all register address and bit logic defines Lee Jones
2014-03-20 9:20 ` [PATCH v6 03/36] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions Lee Jones
2014-03-20 9:20 ` [PATCH v6 04/36] mtd: st_spi_fsm: Supply framework for device requests Lee Jones
2014-03-20 9:20 ` [PATCH v6 05/36] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO Lee Jones
2014-03-20 9:20 ` [PATCH v6 06/36] mtd: st_spi_fsm: Add support for JEDEC ID extraction Lee Jones
2014-03-20 9:20 ` [PATCH v6 07/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands Lee Jones
2014-03-20 9:20 ` [PATCH v6 08/36] mtd: st_spi_fsm: Provide device look-up table Lee Jones
2014-03-20 9:20 ` Lee Jones [this message]
2014-03-20 9:20 ` [PATCH v6 10/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations Lee Jones
2014-03-20 9:20 ` [PATCH v6 11/36] mtd: st_spi_fsm: Use device size to determine address width Lee Jones
2014-03-20 9:20 ` [PATCH v6 12/36] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s) Lee Jones
2014-03-20 9:20 ` [PATCH v6 13/36] mtd: st_spi_fsm: Add device-tree binding documentation Lee Jones
2014-03-20 9:20 ` [PATCH v6 14/36] mtd: st_spi_fsm: Fetch boot-device from mode pins Lee Jones
2014-03-20 9:20 ` [PATCH v6 15/36] mtd: st_spi_fsm: Provide the erase one sector sequence Lee Jones
2014-03-20 9:20 ` [PATCH v6 16/36] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode Lee Jones
2014-03-20 9:20 ` [PATCH v6 17/36] mtd: st_spi_fsm: Prepare read/write sequences according to configuration Lee Jones
2014-03-20 9:20 ` [PATCH v6 18/36] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset Lee Jones
2014-03-20 9:20 ` [PATCH v6 19/36] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode Lee Jones
2014-03-20 9:20 ` [PATCH v6 20/36] mtd: st_spi_fsm: Update the flash Volatile Configuration Register Lee Jones
2014-03-20 9:20 ` [PATCH v6 21/36] mtd: st_spi_fsm: Provide the default read/write configurations Lee Jones
2014-03-20 9:20 ` [PATCH v6 22/36] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations Lee Jones
2014-03-20 9:20 ` [PATCH v6 23/36] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back Lee Jones
2014-03-20 9:20 ` [PATCH v6 24/36] mtd: st_spi_fsm: Prepare default sequences for read/write/erase Lee Jones
2014-03-20 9:20 ` [PATCH v6 25/36] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device Lee Jones
2014-03-20 9:20 ` [PATCH v6 26/36] mtd: st_spi_fsm: Write to Flash via the FSM FIFO Lee Jones
2014-03-20 9:20 ` [PATCH v6 27/36] mtd: st_spi_fsm: Supply a busy wait for post-write status Lee Jones
2014-03-20 9:21 ` [PATCH v6 28/36] mtd: st_spi_fsm: Erase partly or as a whole a Serial Flash device Lee Jones
2014-03-20 9:21 ` [PATCH v6 29/36] mtd: st_spi_fsm: Add the ability to read the FSM's status Lee Jones
2014-03-20 9:21 ` [PATCH v6 30/36] mtd: st_spi_fsm: Add the ability to write to FSM's status register Lee Jones
2014-03-20 9:21 ` [PATCH v6 31/36] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back Lee Jones
2014-03-20 9:21 ` [PATCH v6 32/36] mtd: st_spi_fsm: Supply the S25FLxxx " Lee Jones
2014-03-20 9:21 ` [PATCH v6 33/36] mtd: st_spi_fsm: Supply the W25Qxxx " Lee Jones
2014-03-20 9:21 ` [PATCH v6 34/36] mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct Lee Jones
2014-03-20 9:21 ` [PATCH v6 35/36] mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions Lee Jones
2014-03-20 9:21 ` [PATCH v6 36/36] ARM: STi: Add support for the FSM Serial Flash Controller Lee Jones
2014-03-20 11:27 ` Brian Norris
2014-03-20 15:51 ` Lee Jones
2014-03-20 9:48 ` [PATCH v6 00/36] mtd: st_spi_fsm: Add new driver Brian Norris
2014-03-20 11:19 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395307268-12721-10-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).