From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 13/36] mtd: st_spi_fsm: Add device-tree binding documentation
Date: Thu, 20 Mar 2014 09:20:45 +0000 [thread overview]
Message-ID: <1395307268-12721-14-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1395307268-12721-1-git-send-email-lee.jones@linaro.org>
Cc: devicetree at vger.kernel.org
Acked-by Angus Clark <angus.clark@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
Documentation/devicetree/bindings/mtd/st-fsm.txt | 26 ++++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/st-fsm.txt
diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt
new file mode 100644
index 0000000..c248939
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt
@@ -0,0 +1,26 @@
+* ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
+
+Required properties:
+ - compatible : Should be "st,spi-fsm"
+ - reg : Contains register's location and length.
+ - reg-names : Should contain the reg names "spi-fsm"
+ - interrupts : The interrupt number
+ - pinctrl-0 : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+
+Optional properties:
+ - st,syscfg : Phandle to boot-device system configuration registers
+ - st,boot-device-reg : Address of the aforementioned boot-device register(s)
+ - st,boot-device-spi : Expected boot-device value if booted via this device
+
+Example:
+ spifsm: spifsm at fe902000{
+ compatible = "st,spi-fsm";
+ reg = <0xfe902000 0x1000>;
+ reg-names = "spi-fsm";
+ pinctrl-0 = <&pinctrl_fsm>;
+ st,syscfg = <&syscfg_rear>;
+ st,boot-device-reg = <0x958>;
+ st,boot-device-spi = <0x1a>;
+ status = "okay";
+ };
+
--
1.8.3.2
next prev parent reply other threads:[~2014-03-20 9:20 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-20 9:20 [PATCH v6 00/36] mtd: st_spi_fsm: Add new driver Lee Jones
2014-03-20 9:20 ` [PATCH v6 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework Lee Jones
2014-04-07 8:12 ` Paul Bolle
2014-04-07 9:11 ` Lee Jones
2014-04-07 9:41 ` Paul Bolle
2014-04-07 11:08 ` Lee Jones
2014-03-20 9:20 ` [PATCH v6 02/36] mtd: st_spi_fsm: Supply all register address and bit logic defines Lee Jones
2014-03-20 9:20 ` [PATCH v6 03/36] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions Lee Jones
2014-03-20 9:20 ` [PATCH v6 04/36] mtd: st_spi_fsm: Supply framework for device requests Lee Jones
2014-03-20 9:20 ` [PATCH v6 05/36] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO Lee Jones
2014-03-20 9:20 ` [PATCH v6 06/36] mtd: st_spi_fsm: Add support for JEDEC ID extraction Lee Jones
2014-03-20 9:20 ` [PATCH v6 07/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands Lee Jones
2014-03-20 9:20 ` [PATCH v6 08/36] mtd: st_spi_fsm: Provide device look-up table Lee Jones
2014-03-20 9:20 ` [PATCH v6 09/36] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID Lee Jones
2014-03-20 9:20 ` [PATCH v6 10/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations Lee Jones
2014-03-20 9:20 ` [PATCH v6 11/36] mtd: st_spi_fsm: Use device size to determine address width Lee Jones
2014-03-20 9:20 ` [PATCH v6 12/36] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s) Lee Jones
2014-03-20 9:20 ` Lee Jones [this message]
2014-03-20 9:20 ` [PATCH v6 14/36] mtd: st_spi_fsm: Fetch boot-device from mode pins Lee Jones
2014-03-20 9:20 ` [PATCH v6 15/36] mtd: st_spi_fsm: Provide the erase one sector sequence Lee Jones
2014-03-20 9:20 ` [PATCH v6 16/36] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode Lee Jones
2014-03-20 9:20 ` [PATCH v6 17/36] mtd: st_spi_fsm: Prepare read/write sequences according to configuration Lee Jones
2014-03-20 9:20 ` [PATCH v6 18/36] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset Lee Jones
2014-03-20 9:20 ` [PATCH v6 19/36] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode Lee Jones
2014-03-20 9:20 ` [PATCH v6 20/36] mtd: st_spi_fsm: Update the flash Volatile Configuration Register Lee Jones
2014-03-20 9:20 ` [PATCH v6 21/36] mtd: st_spi_fsm: Provide the default read/write configurations Lee Jones
2014-03-20 9:20 ` [PATCH v6 22/36] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations Lee Jones
2014-03-20 9:20 ` [PATCH v6 23/36] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back Lee Jones
2014-03-20 9:20 ` [PATCH v6 24/36] mtd: st_spi_fsm: Prepare default sequences for read/write/erase Lee Jones
2014-03-20 9:20 ` [PATCH v6 25/36] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device Lee Jones
2014-03-20 9:20 ` [PATCH v6 26/36] mtd: st_spi_fsm: Write to Flash via the FSM FIFO Lee Jones
2014-03-20 9:20 ` [PATCH v6 27/36] mtd: st_spi_fsm: Supply a busy wait for post-write status Lee Jones
2014-03-20 9:21 ` [PATCH v6 28/36] mtd: st_spi_fsm: Erase partly or as a whole a Serial Flash device Lee Jones
2014-03-20 9:21 ` [PATCH v6 29/36] mtd: st_spi_fsm: Add the ability to read the FSM's status Lee Jones
2014-03-20 9:21 ` [PATCH v6 30/36] mtd: st_spi_fsm: Add the ability to write to FSM's status register Lee Jones
2014-03-20 9:21 ` [PATCH v6 31/36] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back Lee Jones
2014-03-20 9:21 ` [PATCH v6 32/36] mtd: st_spi_fsm: Supply the S25FLxxx " Lee Jones
2014-03-20 9:21 ` [PATCH v6 33/36] mtd: st_spi_fsm: Supply the W25Qxxx " Lee Jones
2014-03-20 9:21 ` [PATCH v6 34/36] mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct Lee Jones
2014-03-20 9:21 ` [PATCH v6 35/36] mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions Lee Jones
2014-03-20 9:21 ` [PATCH v6 36/36] ARM: STi: Add support for the FSM Serial Flash Controller Lee Jones
2014-03-20 11:27 ` Brian Norris
2014-03-20 15:51 ` Lee Jones
2014-03-20 9:48 ` [PATCH v6 00/36] mtd: st_spi_fsm: Add new driver Brian Norris
2014-03-20 11:19 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395307268-12721-14-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).