linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 30/36] mtd: st_spi_fsm: Add the ability to write to FSM's status register
Date: Thu, 20 Mar 2014 09:21:02 +0000	[thread overview]
Message-ID: <1395307268-12721-31-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1395307268-12721-1-git-send-email-lee.jones@linaro.org>

Acked-by Angus Clark <angus.clark@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mtd/devices/st_spi_fsm.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 5e315e3..0eb2c09 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -588,6 +588,23 @@ static struct stfsm_seq stfsm_seq_erase_chip = {
 		    SEQ_CFG_STARTSEQ),
 };
 
+static struct stfsm_seq stfsm_seq_write_status = {
+	.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+	.seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_WRSR)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_CMD2,
+		STFSM_INST_STA_WR1,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
 static struct stfsm_seq stfsm_seq_wrvcr = {
 	.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
 		       SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
@@ -817,6 +834,25 @@ static int stfsm_read_status(struct stfsm *fsm, uint8_t cmd,
 	return 0;
 }
 
+static int stfsm_write_status(struct stfsm *fsm, uint16_t status,
+			       int sta_bytes)
+{
+	struct stfsm_seq *seq = &stfsm_seq_write_status;
+
+	dev_dbg(fsm->dev, "writing STA[%s] 0x%04x\n",
+		(sta_bytes == 1) ? "1" : "1+2", status);
+
+	seq->status = (uint32_t)status | STA_PADS_1 | STA_CSDEASSERT;
+	seq->seq[2] = (sta_bytes == 1) ?
+		STFSM_INST_STA_WR1 : STFSM_INST_STA_WR1_2;
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	return 0;
+};
+
 static int stfsm_wrvcr(struct stfsm *fsm, uint8_t data)
 {
 	struct stfsm_seq *seq = &stfsm_seq_wrvcr;
-- 
1.8.3.2

  parent reply	other threads:[~2014-03-20  9:21 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-20  9:20 [PATCH v6 00/36] mtd: st_spi_fsm: Add new driver Lee Jones
2014-03-20  9:20 ` [PATCH v6 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework Lee Jones
2014-04-07  8:12   ` Paul Bolle
2014-04-07  9:11     ` Lee Jones
2014-04-07  9:41       ` Paul Bolle
2014-04-07 11:08         ` Lee Jones
2014-03-20  9:20 ` [PATCH v6 02/36] mtd: st_spi_fsm: Supply all register address and bit logic defines Lee Jones
2014-03-20  9:20 ` [PATCH v6 03/36] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions Lee Jones
2014-03-20  9:20 ` [PATCH v6 04/36] mtd: st_spi_fsm: Supply framework for device requests Lee Jones
2014-03-20  9:20 ` [PATCH v6 05/36] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO Lee Jones
2014-03-20  9:20 ` [PATCH v6 06/36] mtd: st_spi_fsm: Add support for JEDEC ID extraction Lee Jones
2014-03-20  9:20 ` [PATCH v6 07/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands Lee Jones
2014-03-20  9:20 ` [PATCH v6 08/36] mtd: st_spi_fsm: Provide device look-up table Lee Jones
2014-03-20  9:20 ` [PATCH v6 09/36] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID Lee Jones
2014-03-20  9:20 ` [PATCH v6 10/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations Lee Jones
2014-03-20  9:20 ` [PATCH v6 11/36] mtd: st_spi_fsm: Use device size to determine address width Lee Jones
2014-03-20  9:20 ` [PATCH v6 12/36] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s) Lee Jones
2014-03-20  9:20 ` [PATCH v6 13/36] mtd: st_spi_fsm: Add device-tree binding documentation Lee Jones
2014-03-20  9:20 ` [PATCH v6 14/36] mtd: st_spi_fsm: Fetch boot-device from mode pins Lee Jones
2014-03-20  9:20 ` [PATCH v6 15/36] mtd: st_spi_fsm: Provide the erase one sector sequence Lee Jones
2014-03-20  9:20 ` [PATCH v6 16/36] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode Lee Jones
2014-03-20  9:20 ` [PATCH v6 17/36] mtd: st_spi_fsm: Prepare read/write sequences according to configuration Lee Jones
2014-03-20  9:20 ` [PATCH v6 18/36] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset Lee Jones
2014-03-20  9:20 ` [PATCH v6 19/36] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode Lee Jones
2014-03-20  9:20 ` [PATCH v6 20/36] mtd: st_spi_fsm: Update the flash Volatile Configuration Register Lee Jones
2014-03-20  9:20 ` [PATCH v6 21/36] mtd: st_spi_fsm: Provide the default read/write configurations Lee Jones
2014-03-20  9:20 ` [PATCH v6 22/36] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations Lee Jones
2014-03-20  9:20 ` [PATCH v6 23/36] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back Lee Jones
2014-03-20  9:20 ` [PATCH v6 24/36] mtd: st_spi_fsm: Prepare default sequences for read/write/erase Lee Jones
2014-03-20  9:20 ` [PATCH v6 25/36] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device Lee Jones
2014-03-20  9:20 ` [PATCH v6 26/36] mtd: st_spi_fsm: Write to Flash via the FSM FIFO Lee Jones
2014-03-20  9:20 ` [PATCH v6 27/36] mtd: st_spi_fsm: Supply a busy wait for post-write status Lee Jones
2014-03-20  9:21 ` [PATCH v6 28/36] mtd: st_spi_fsm: Erase partly or as a whole a Serial Flash device Lee Jones
2014-03-20  9:21 ` [PATCH v6 29/36] mtd: st_spi_fsm: Add the ability to read the FSM's status Lee Jones
2014-03-20  9:21 ` Lee Jones [this message]
2014-03-20  9:21 ` [PATCH v6 31/36] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back Lee Jones
2014-03-20  9:21 ` [PATCH v6 32/36] mtd: st_spi_fsm: Supply the S25FLxxx " Lee Jones
2014-03-20  9:21 ` [PATCH v6 33/36] mtd: st_spi_fsm: Supply the W25Qxxx " Lee Jones
2014-03-20  9:21 ` [PATCH v6 34/36] mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct Lee Jones
2014-03-20  9:21 ` [PATCH v6 35/36] mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions Lee Jones
2014-03-20  9:21 ` [PATCH v6 36/36] ARM: STi: Add support for the FSM Serial Flash Controller Lee Jones
2014-03-20 11:27   ` Brian Norris
2014-03-20 15:51     ` Lee Jones
2014-03-20  9:48 ` [PATCH v6 00/36] mtd: st_spi_fsm: Add new driver Brian Norris
2014-03-20 11:19 ` Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395307268-12721-31-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).