From mboxrd@z Thu Jan 1 00:00:00 1970 From: ian.campbell@citrix.com (Ian Campbell) Date: Fri, 21 Mar 2014 09:48:14 +0000 Subject: [PATCH 2/2] ARM: highbank: avoid L2 cache smc calls when PL310 is not present In-Reply-To: <20140320233920.GD24571@kroah.com> References: <20140320233920.GD24571@kroah.com> Message-ID: <1395395294-17848-2-git-send-email-ian.campbell@citrix.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Rob Herring commit a56a5cf1f2ec895599eace0ac6eba1e4a489e4bf upstream. While Midway firmware handles L2 smc calls as nops, the custom smc calls present a problem when running virtualized Midway guest. They aren't needed so just avoid calling them. In the process, cleanup the L2X0 ifdefs and use IS_ENABLED instead. Signed-off-by: Rob Herring Signed-off-by: Ian Campbell --- arch/arm/mach-highbank/highbank.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 5ed19e8..35d1029 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -65,14 +65,12 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr) HB_JUMP_TABLE_PHYS(cpu) + 15); } -#ifdef CONFIG_CACHE_L2X0 static void highbank_l2x0_disable(void) { outer_flush_all(); /* Disable PL310 L2 Cache controller */ highbank_smc1(0x102, 0x0); } -#endif static void __init highbank_init_irq(void) { @@ -81,12 +79,13 @@ static void __init highbank_init_irq(void) if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) highbank_scu_map_io(); -#ifdef CONFIG_CACHE_L2X0 /* Enable PL310 L2 Cache controller */ - highbank_smc1(0x102, 0x1); - l2x0_of_init(0, ~0UL); - outer_cache.disable = highbank_l2x0_disable; -#endif + if (IS_ENABLED(CONFIG_CACHE_L2X0) && + of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) { + highbank_smc1(0x102, 0x1); + l2x0_of_init(0, ~0UL); + outer_cache.disable = highbank_l2x0_disable; + } } static void __init highbank_timer_init(void) -- 1.7.10.4