From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Fri, 21 Mar 2014 11:33:08 +0000 Subject: [PATCH RESEND for ARM-SoC 2/2] ARM: STi: stih41x: Add support for the FSM Serial Flash Controller In-Reply-To: <1395401588-8825-1-git-send-email-lee.jones@linaro.org> References: <1395401588-8825-1-git-send-email-lee.jones@linaro.org> Message-ID: <1395401588-8825-3-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Here we add the necessary device nodes required for successful device probing and Pinctrl setup for the FSM when booting on an STiH415 (Orly1) or STiH416 (Orly2) based b2020 development board. Acked-by: Srinivas Kandagatla Acked-by Angus Clark Acked-by: Brian Norris Acked-by: Maxime Coquelin Signed-off-by: Lee Jones --- arch/arm/boot/dts/stih41x-b2020.dtsi | 1 + arch/arm/boot/dts/stih41x-b2020x.dtsi | 28 ++++++++++++++++++++++++++++ 2 files changed, 29 insertions(+) create mode 100644 arch/arm/boot/dts/stih41x-b2020x.dtsi diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index 0ef0a69..01487e0 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -6,6 +6,7 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ +#include "stih41x-b2020x.dtsi" / { memory{ device_type = "memory"; diff --git a/arch/arm/boot/dts/stih41x-b2020x.dtsi b/arch/arm/boot/dts/stih41x-b2020x.dtsi new file mode 100644 index 0000000..df01c12 --- /dev/null +++ b/arch/arm/boot/dts/stih41x-b2020x.dtsi @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Lee Jones + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/ { + soc { + spifsm: spifsm at fe902000 { + #address-cells = <1>; + #size-cells = <1>; + + status = "okay"; + + partition at 0 { + label = "SerialFlash1"; + reg = <0x00000000 0x00500000>; + }; + + partition at 500000 { + label = "SerialFlash2"; + reg = <0x00500000 0x00b00000>; + }; + }; + }; +}; -- 1.8.3.2