From: anup.patel@linaro.org (Anup Patel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 07/11] ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO
Date: Fri, 21 Mar 2014 18:23:30 +0530 [thread overview]
Message-ID: <1395406414-11707-8-git-send-email-anup.patel@linaro.org> (raw)
In-Reply-To: <1395406414-11707-1-git-send-email-anup.patel@linaro.org>
This patch adds emulation of PSCI v0.2 AFFINITY_INFO function call
for KVM ARM/ARM64. This is a VCPU-level function call which will be
used to determine current state of given affinity level.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
---
arch/arm/kvm/psci.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 65 insertions(+), 2 deletions(-)
diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
index 1f1720a..5bd9ae4 100644
--- a/arch/arm/kvm/psci.c
+++ b/arch/arm/kvm/psci.c
@@ -27,6 +27,31 @@
* as described in ARM document number ARM DEN 0022A.
*/
+static unsigned long psci_affinity_mask(unsigned long affinity_level)
+{
+ unsigned long affinity_mask = MPIDR_HWID_BITMASK;
+
+ switch (affinity_level) {
+ case 0: /* All affinity levels are valid */
+ affinity_mask &= ~0x0UL;
+ break;
+ case 1: /* Aff0 ignored */
+ affinity_mask &= ~0xFFUL;
+ break;
+ case 2: /* Aff0 and Aff1 ignored */
+ affinity_mask &= ~0xFFFFUL;
+ break;
+ case 3: /* Aff0, Aff1, and Aff2 ignored */
+ affinity_mask &= ~0xFFFFFFUL;
+ break;
+ default:
+ affinity_mask = 0;
+ break;
+ };
+
+ return affinity_mask;
+}
+
static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
{
vcpu->arch.pause = true;
@@ -85,6 +110,42 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
return KVM_PSCI_RET_SUCCESS;
}
+static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
+{
+ int i;
+ unsigned long mpidr;
+ unsigned long target_affinity;
+ unsigned long target_affinity_mask;
+ unsigned long lowest_affinity_level;
+ struct kvm *kvm = vcpu->kvm;
+ struct kvm_vcpu *tmp;
+
+ target_affinity = *vcpu_reg(vcpu, 1);
+ lowest_affinity_level = *vcpu_reg(vcpu, 2);
+
+ /* Determine target affinity mask */
+ target_affinity_mask = psci_affinity_mask(lowest_affinity_level);
+ if (!target_affinity_mask)
+ return KVM_PSCI_RET_INVAL;
+
+ /* Ignore other bits of target affinity */
+ target_affinity &= target_affinity_mask;
+
+ /*
+ * If one or more VCPU matching target affinity are running
+ * then return 0 (ON) else return 1 (OFF)
+ */
+ kvm_for_each_vcpu(i, tmp, kvm) {
+ mpidr = kvm_vcpu_get_mpidr(tmp);
+ if (((mpidr & target_affinity_mask) == target_affinity) &&
+ !tmp->arch.pause) {
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
static inline void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type)
{
memset(&vcpu->run->system_event, 0, sizeof(vcpu->run->system_event));
@@ -132,6 +193,10 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
case KVM_PSCI_0_2_FN64_CPU_ON:
val = kvm_psci_vcpu_on(vcpu);
break;
+ case KVM_PSCI_0_2_FN_AFFINITY_INFO:
+ case KVM_PSCI_0_2_FN64_AFFINITY_INFO:
+ val = kvm_psci_vcpu_affinity_info(vcpu);
+ break;
case KVM_PSCI_0_2_FN_SYSTEM_OFF:
kvm_psci_system_off(vcpu);
val = KVM_PSCI_RET_SUCCESS;
@@ -143,12 +208,10 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
ret = 0;
break;
case KVM_PSCI_0_2_FN_CPU_SUSPEND:
- case KVM_PSCI_0_2_FN_AFFINITY_INFO:
case KVM_PSCI_0_2_FN_MIGRATE:
case KVM_PSCI_0_2_FN_MIGRATE_INFO_TYPE:
case KVM_PSCI_0_2_FN_MIGRATE_INFO_UP_CPU:
case KVM_PSCI_0_2_FN64_CPU_SUSPEND:
- case KVM_PSCI_0_2_FN64_AFFINITY_INFO:
case KVM_PSCI_0_2_FN64_MIGRATE:
case KVM_PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU:
val = KVM_PSCI_RET_NI;
--
1.7.9.5
next prev parent reply other threads:[~2014-03-21 12:53 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-21 12:53 [PATCH v5 00/11] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64 Anup Patel
2014-03-21 12:53 ` [PATCH v5 01/11] KVM: Add capability to advertise PSCI v0.2 support Anup Patel
2014-03-21 23:22 ` Christoffer Dall
2014-03-22 4:00 ` Anup Patel
2014-03-21 12:53 ` [PATCH v5 02/11] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation Anup Patel
2014-03-21 23:27 ` Christoffer Dall
2014-03-22 4:24 ` Anup Patel
2014-03-23 17:44 ` Christoffer Dall
2014-03-24 13:26 ` Rob Herring
2014-03-26 15:32 ` Ashwin Chaugule
2014-03-26 16:08 ` Rob Herring
2014-03-21 12:53 ` [PATCH v5 03/11] KVM: Documentation: Add info regarding KVM_ARM_VCPU_PSCI_0_2 feature Anup Patel
2014-03-21 12:53 ` [PATCH v5 04/11] ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible Anup Patel
2014-03-21 12:53 ` [PATCH v5 05/11] KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header Anup Patel
2014-03-21 12:53 ` [PATCH v5 06/11] ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET Anup Patel
2014-03-21 12:53 ` Anup Patel [this message]
2014-03-21 12:53 ` [PATCH v5 08/11] ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functions Anup Patel
2014-03-21 12:53 ` [PATCH v5 09/11] ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2 Anup Patel
2014-03-21 23:29 ` Christoffer Dall
2014-03-21 12:53 ` [PATCH v5 10/11] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND Anup Patel
2014-03-21 23:37 ` Christoffer Dall
2014-03-22 4:33 ` Anup Patel
2014-03-23 17:54 ` Christoffer Dall
2014-03-21 12:53 ` [PATCH v5 11/11] ARM/ARM64: KVM: Advertise KVM_CAP_ARM_PSCI_0_2 to user space Anup Patel
2014-03-21 23:30 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395406414-11707-8-git-send-email-anup.patel@linaro.org \
--to=anup.patel@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).