From mboxrd@z Thu Jan 1 00:00:00 1970 From: broonie@kernel.org (Mark Brown) Date: Fri, 21 Mar 2014 17:27:58 +0000 Subject: [PATCH 1/4] arm64: topology: Initialise default topology state immediately Message-ID: <1395422881-10029-1-git-send-email-broonie@kernel.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Mark Brown As a legacy of the way 32 bit ARM did things the topology code uses a null topology map by default and then overwrites it by mapping cores with no information to a cluster by themselves later. In order to make it simpler to reset things as part of recovering from parse failures in firmware information directly set this configuration on init. A core will always be its own sibling so there should be no risk of confusion with firmware provided information. Signed-off-by: Mark Brown --- arch/arm64/kernel/topology.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c index 3e06b0be4ec8..ff662b23af5f 100644 --- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -43,9 +43,6 @@ static void update_siblings_masks(unsigned int cpuid) * reset it to default behaviour */ pr_debug("CPU%u: No topology information configured\n", cpuid); - cpuid_topo->core_id = 0; - cpumask_set_cpu(cpuid, &cpuid_topo->core_sibling); - cpumask_set_cpu(cpuid, &cpuid_topo->thread_sibling); return; } @@ -87,9 +84,12 @@ void __init init_cpu_topology(void) struct cpu_topology *cpu_topo = &cpu_topology[cpu]; cpu_topo->thread_id = -1; - cpu_topo->core_id = -1; + cpu_topo->core_id = 0; cpu_topo->cluster_id = -1; + cpumask_clear(&cpu_topo->core_sibling); + cpumask_set_cpu(cpu, &cpu_topo->core_sibling); cpumask_clear(&cpu_topo->thread_sibling); + cpumask_set_cpu(cpu, &cpu_topo->thread_sibling); } } -- 1.9.1