[PATCH 4/6] ARM: socfpga: dts: add can0+1

[dinguyen@altera.com (Dinh Nguyen)]

On Mon, 2014-03-31 at 17:40 +0200, Steffen Trumtrar wrote:
> Add both can controllers to the dtsi.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
>  arch/arm/boot/dts/socfpga.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> index d0594c3..51148b8 100644
> --- a/arch/arm/boot/dts/socfpga.dtsi
> +++ b/arch/arm/boot/dts/socfpga.dtsi
> @@ -470,6 +470,22 @@
>  			status = "disabled";
>  		};
>  
> +		can0: can at 0xffc00000 {

I've seen a comment from Rob Herring to remove the 0x here.
> +			compatible = "bosch,d_can";
> +			reg = <0xffc00000 0x1000>;
> +			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
> +			clocks = <&can0_clk>;
> +			status = "disabled";
> +		};
> +
> +		can1: can at 0xffc01000 {

Same...

> +			compatible = "bosch,d_can";
> +			reg = <0xffc01000 0x1000>;
> +			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
> +			clocks = <&can1_clk>;
> +			status = "disabled";
> +		};
> +
>  		i2c0: i2c at 0xffc04000 {

Same comment here..but would apply to patch 3/6.

Thanks,

Dinh
>  			#address-cells = <1>;
>  			#size-cells = <0>;