[PATCH 1/3] ARM: tegra: remove UART5/UARTE from tegra124.dtsi

[PATCH 1/3] ARM: tegra: remove UART5/UARTE from tegra124.dtsi

[Stephen Warren]

From: Stephen Warren <swarren@nvidia.com>

Tegra124 only has 4 UARTs. Parts of the documentation hint at a fifth
UART, but this appears to be left-over from earlier SoC documentation.
Remove the non-existent DT node for UART5.

Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
 arch/arm/boot/dts/tegra124.dtsi | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index cf45a1a39483..6d540a025148 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -233,19 +233,6 @@
 		status = "disabled";
 	};
 
-	serial at 0,70006400 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x0 0x70006400 0x0 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTE>;
-		resets = <&tegra_car 66>;
-		reset-names = "serial";
-		dmas = <&apbdma 20>, <&apbdma 20>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
 	pwm at 0,7000a000 {
 		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
 		reg = <0x0 0x7000a000 0x0 0x100>;
-- 
1.8.1.5

[PATCH 2/3] clk: tegra: remove non-existent clocks

[Stephen Warren]

From: Stephen Warren <swarren@nvidia.com>

The Tegra124 clock driver currently provides 3 clocks that don't actually
exist; 2 for NAND and one for UART5/UARTE. Delete these.

Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
 drivers/clk/tegra/clk-tegra124.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index 166e02f16c8a..cc37c342c4cb 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -764,7 +764,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_sdmmc2_8] = { .dt_id = TEGRA124_CLK_SDMMC2, .present = true },
 	[tegra_clk_i2s1] = { .dt_id = TEGRA124_CLK_I2S1, .present = true },
 	[tegra_clk_i2c1] = { .dt_id = TEGRA124_CLK_I2C1, .present = true },
-	[tegra_clk_ndflash] = { .dt_id = TEGRA124_CLK_NDFLASH, .present = true },
 	[tegra_clk_sdmmc1_8] = { .dt_id = TEGRA124_CLK_SDMMC1, .present = true },
 	[tegra_clk_sdmmc4_8] = { .dt_id = TEGRA124_CLK_SDMMC4, .present = true },
 	[tegra_clk_pwm] = { .dt_id = TEGRA124_CLK_PWM, .present = true },
@@ -809,7 +808,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_trace] = { .dt_id = TEGRA124_CLK_TRACE, .present = true },
 	[tegra_clk_soc_therm] = { .dt_id = TEGRA124_CLK_SOC_THERM, .present = true },
 	[tegra_clk_dtv] = { .dt_id = TEGRA124_CLK_DTV, .present = true },
-	[tegra_clk_ndspeed] = { .dt_id = TEGRA124_CLK_NDSPEED, .present = true },
 	[tegra_clk_i2cslow] = { .dt_id = TEGRA124_CLK_I2CSLOW, .present = true },
 	[tegra_clk_dsib] = { .dt_id = TEGRA124_CLK_DSIB, .present = true },
 	[tegra_clk_tsec] = { .dt_id = TEGRA124_CLK_TSEC, .present = true },
@@ -952,7 +950,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_3_MUX, .present = true },
 	[tegra_clk_dsia_mux] = { .dt_id = TEGRA124_CLK_DSIA_MUX, .present = true },
 	[tegra_clk_dsib_mux] = { .dt_id = TEGRA124_CLK_DSIB_MUX, .present = true },
-	[tegra_clk_uarte] = { .dt_id = TEGRA124_CLK_UARTE, .present = true },
 };
 
 static struct tegra_devclk devclks[] __initdata = {
-- 
1.8.1.5

[PATCH 2/3] clk: tegra: remove non-existent clocks

[Peter De Schrijver]

On Tue, Apr 01, 2014 at 10:13:16PM +0200, Stephen Warren wrote:
> From: Stephen Warren <swarren@nvidia.com>
> 
> The Tegra124 clock driver currently provides 3 clocks that don't actually
> exist; 2 for NAND and one for UART5/UARTE. Delete these.
> 
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Stephen Warren <swarren@nvidia.com>

Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>

Cheers,

Peter.

[PATCH 2/3] clk: tegra: remove non-existent clocks

[Stephen Warren]

On 04/01/2014 02:13 PM, Stephen Warren wrote:
> From: Stephen Warren <swarren@nvidia.com>
> 
> The Tegra124 clock driver currently provides 3 clocks that don't actually
> exist; 2 for NAND and one for UART5/UARTE. Delete these.

Mike, are you OK with this patch? Can I get your ack so this patch can
be taken into a branch with a couple other patches that it depends or or
depend on it.

arm-soc, I was hoping this whole series would get applied for 3.15
through the arm-soc tree. Is there any issue with that?

[PATCH 3/3] dt: tegra: remove non-existent clock IDs

[Stephen Warren]

From: Stephen Warren <swarren@nvidia.com>

The Tegra124 clock DT binding currently provides 3 clocks that don't
actually exist; 2 for NAND and one for UART5/UARTE. Delete these. While
this is technically an incompatible DT ABI change, nothing could have
used these clock IDs for anything practical, since the HW doesn't exist.

Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
This depends on the previous 2 patches. Either all the patches can be
taken through the same tree with acks, or we can hold of applying this
patch until the other two make it into Linus' tree.
---
 include/dt-bindings/clock/tegra124-car.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/dt-bindings/clock/tegra124-car.h b/include/dt-bindings/clock/tegra124-car.h
index 8c1603b10665..433528ab5161 100644
--- a/include/dt-bindings/clock/tegra124-car.h
+++ b/include/dt-bindings/clock/tegra124-car.h
@@ -29,7 +29,7 @@
 /* 10 (register bit affects spdif_in and spdif_out) */
 #define TEGRA124_CLK_I2S1 11
 #define TEGRA124_CLK_I2C1 12
-#define TEGRA124_CLK_NDFLASH 13
+/* 13 */
 #define TEGRA124_CLK_SDMMC1 14
 #define TEGRA124_CLK_SDMMC4 15
 /* 16 */
@@ -83,7 +83,7 @@
 
 /* 64 */
 #define TEGRA124_CLK_UARTD 65
-#define TEGRA124_CLK_UARTE 66
+/* 66 */
 #define TEGRA124_CLK_I2C3 67
 #define TEGRA124_CLK_SBC4 68
 #define TEGRA124_CLK_SDMMC3 69
@@ -97,7 +97,7 @@
 #define TEGRA124_CLK_TRACE 77
 #define TEGRA124_CLK_SOC_THERM 78
 #define TEGRA124_CLK_DTV 79
-#define TEGRA124_CLK_NDSPEED 80
+/* 80 */
 #define TEGRA124_CLK_I2CSLOW 81
 #define TEGRA124_CLK_DSIB 82
 #define TEGRA124_CLK_TSEC 83
-- 
1.8.1.5

[PATCH 1/3] ARM: tegra: remove UART5/UARTE from tegra124.dtsi

[Stephen Warren]

On 04/01/2014 02:13 PM, Stephen Warren wrote:
> From: Stephen Warren <swarren@nvidia.com>
> 
> Tegra124 only has 4 UARTs. Parts of the documentation hint at a fifth
> UART, but this appears to be left-over from earlier SoC documentation.
> Remove the non-existent DT node for UART5.

arm-soc maintainers, I'm hoping this will be applied as a fix for v3.15
through the arm-soc tree. Do you want me to send a pull request with the
series? Patch 2/3 does touch files in drivers/clk; are you waiting for
Mike's ack on it? It already has Peter's ack as Tegra clock driver
maintainer.

Thanks.