[PATCH 11/17] ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm notifier

[daniel.lezcano@linaro.org (Daniel Lezcano)]

The code to initiate and exit the powerdown sequence is the same in pm.c and
cpuidle.c.

Let's split the common part in the pm.c and reuse it from the cpu_pm notifier.

That is one more step forward to make the cpuidle driver arch indenpendant.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/arm/mach-exynos/cpuidle.c |   21 ---------------------
 arch/arm/mach-exynos/pm.c      |   22 ++++++++++++++++++----
 2 files changed, 18 insertions(+), 25 deletions(-)

diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 7014654..635b09c 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -77,31 +77,10 @@ static int exynos_enter_core0_aftr(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)
 {
-	unsigned long tmp;
-
-	/* Setting Central Sequence Register for power down mode */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
-	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
 	cpu_pm_enter();
 	cpu_suspend(0, idle_finisher);
 	cpu_pm_exit();
 
-	/*
-	 * If PMU failed while entering sleep mode, WFI will be
-	 * ignored by PMU and then exiting cpu_do_idle().
-	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
-	 * in this situation.
-	 */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
-		tmp |= S5P_CENTRAL_LOWPWR_CFG;
-		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-		/* Clear wakeup state register */
-		__raw_writel(0x0, S5P_WAKEUP_STAT);
-	}
-
 	return index;
 }
 
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 3f2ddef..b364212 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -301,15 +301,19 @@ static __init int exynos_pm_drvinit(void)
 }
 arch_initcall(exynos_pm_drvinit);
 
-static int exynos_pm_suspend(void)
+static void exynos_pm_central_suspend(void)
 {
 	unsigned long tmp;
 
 	/* Setting Central Sequence Register for power down mode */
-
 	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+}
+
+static int exynos_pm_suspend(void)
+{
+	unsigned long tmp;
 
 	/* Setting SEQ_OPTION register */
 
@@ -322,7 +326,7 @@ static int exynos_pm_suspend(void)
 	return 0;
 }
 
-static void exynos_pm_resume(void)
+static int exynos_pm_central_resume(void)
 {
 	unsigned long tmp;
 
@@ -339,9 +343,17 @@ static void exynos_pm_resume(void)
 		/* clear the wakeup state register */
 		__raw_writel(0x0, S5P_WAKEUP_STAT);
 		/* No need to perform below restore code */
-		goto early_wakeup;
+		return -1;
 	}
 
+	return 0;
+}
+
+static void exynos_pm_resume(void)
+{
+	if (exynos_pm_central_resume())
+		goto early_wakeup;
+
 	if (!soc_is_exynos5250())
 		exynos_cpu_restore_register();
 
@@ -385,6 +397,7 @@ static int exynos_cpu_pm_notifier(struct notifier_block *self,
 {
 	switch (cmd) {
 	case CPU_PM_ENTER:
+		exynos_pm_central_suspend();
 		exynos_cpu_save_register();
 		exynos_set_wakeupmask();
 		break;
@@ -392,6 +405,7 @@ static int exynos_cpu_pm_notifier(struct notifier_block *self,
 	case CPU_PM_EXIT:
 		scu_enable(S5P_VA_SCU);
 		exynos_cpu_restore_register();
+		exynos_pm_central_resume();
 		break;
 	}
 
-- 
1.7.9.5