linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: s.trumtrar@pengutronix.de (Steffen Trumtrar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] reset: add driver for socfpga
Date: Fri,  4 Apr 2014 18:31:25 +0200	[thread overview]
Message-ID: <1396629087-23727-2-git-send-email-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <1396629087-23727-1-git-send-email-s.trumtrar@pengutronix.de>

Add a reset-controller driver for the socfpga platform.
The reset-controller has four banks with up to 32 entries all encapsulated in
one module block.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 drivers/reset/Makefile        |   1 +
 drivers/reset/reset-socfpga.c | 149 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 150 insertions(+)
 create mode 100644 drivers/reset/reset-socfpga.c

diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index cc29832..ab64077 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_RESET_CONTROLLER) += core.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
+obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
new file mode 100644
index 0000000..b21e4e4
--- /dev/null
+++ b/drivers/reset/reset-socfpga.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * based on
+ * Allwinner SoCs Reset Controller driver
+ *
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define NR_BANKS		4
+#define MAX_BANK_WIDTH		32
+#define OFFSET_MODRST		0x10
+
+struct socfpga_reset_data {
+	spinlock_t			lock;
+	void __iomem			*membase;
+	struct reset_controller_dev	rcdev;
+};
+
+static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct socfpga_reset_data *data = container_of(rcdev,
+						     struct socfpga_reset_data,
+						     rcdev);
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS));
+	writel(reg | BIT(offset), data->membase + OFFSET_MODRST +
+				 (bank * NR_BANKS));
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	struct socfpga_reset_data *data = container_of(rcdev,
+						     struct socfpga_reset_data,
+						     rcdev);
+
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS));
+	writel(reg & ~BIT(offset), data->membase + OFFSET_MODRST +
+				  (bank * NR_BANKS));
+
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static struct reset_control_ops socfpga_reset_ops = {
+	.assert		= socfpga_reset_assert,
+	.deassert	= socfpga_reset_deassert,
+};
+
+static int socfpga_reset_probe(struct platform_device *pdev)
+{
+	struct socfpga_reset_data *data;
+	struct resource *res;
+	int ret;
+
+	/*
+	 * The binding was mainlined without the required property.
+	 * Do not continue, when we encounter an old DT.
+	 */
+	if (!of_find_property(pdev->dev.of_node, "#reset-cells", NULL)) {
+		dev_err(&pdev->dev, "dt missing #reset-cells property\n");
+		return -EINVAL;
+	}
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (!data->membase) {
+		ret = -ENOMEM;
+		return ret;
+	}
+
+	spin_lock_init(&data->lock);
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = NR_BANKS * MAX_BANK_WIDTH;
+	data->rcdev.ops = &socfpga_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+	reset_controller_register(&data->rcdev);
+
+	return 0;
+}
+
+static int socfpga_reset_remove(struct platform_device *pdev)
+{
+	struct socfpga_reset_data *data = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&data->rcdev);
+
+	return 0;
+}
+
+static const struct of_device_id socfpga_reset_dt_ids[] = {
+	{ .compatible = "altr,rst-mgr", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver socfpga_reset_driver = {
+	.probe	= socfpga_reset_probe,
+	.remove	= socfpga_reset_remove,
+	.driver = {
+		.name		= "socfpga-reset",
+		.owner		= THIS_MODULE,
+		.of_match_table	= socfpga_reset_dt_ids,
+	},
+};
+module_platform_driver(socfpga_reset_driver);
+
+MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de");
+MODULE_DESCRIPTION("Socfpga Reset Controller Driver");
+MODULE_LICENSE("GPL");
-- 
1.9.1

  reply	other threads:[~2014-04-04 16:31 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-04 16:31 [PATCH 0/3] reset: add socfpga reset-controller Steffen Trumtrar
2014-04-04 16:31 ` Steffen Trumtrar [this message]
2014-04-07  8:46   ` [PATCH 1/3] reset: add driver for socfpga Philipp Zabel
2014-04-07  9:28     ` Steffen Trumtrar
2014-04-04 16:31 ` [PATCH 2/3] Documentation: dt: socfpga: add reset-cells property Steffen Trumtrar
2014-04-04 16:31 ` [PATCH 3/3] ARM: socfpga: dts: add reset-controller Steffen Trumtrar
2014-04-07 21:12   ` Dinh Nguyen
2014-04-07 22:41     ` Steffen Trumtrar
2014-04-08  2:30       ` Dinh Nguyen
2014-04-09  8:37         ` Steffen Trumtrar
2014-04-09  9:16           ` Philipp Zabel
2014-04-09 10:05             ` Steffen Trumtrar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1396629087-23727-2-git-send-email-s.trumtrar@pengutronix.de \
    --to=s.trumtrar@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).