linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: shc_work@mail.ru (Alexander Shiyan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: i.MX: Use single naming style for i.MX WEIM devices
Date: Tue,  8 Apr 2014 19:54:43 +0400	[thread overview]
Message-ID: <1396972483-2342-1-git-send-email-shc_work@mail.ru> (raw)

This patch converts all i.MX WEIM users to use single naming style
for devices.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 Documentation/devicetree/bindings/bus/imx-weim.txt | 4 ++--
 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts     | 2 +-
 arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi    | 4 ++--
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi           | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index 6630d84..73aa2f3 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -70,9 +70,9 @@ Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
 		ranges = <0 0 0x08000000 0x08000000>;
 		fsl,weim-cs-gpr = <&gpr>;
 
-		nor at 0,0 {
+		nor at 0,00000000 {
 			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
+			reg = <0 0x00000000 0x02000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			bank-width = <2>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 9117a3c..e501aa9 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -280,7 +280,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_weim>;
 
-	can at d4000000 {
+	can at 4,00000000 {
 		compatible = "nxp,sja1000";
 		reg = <4 0x00000000 0x00000100>;
 		interrupt-parent = <&gpio5>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index 8e10aef..758612a 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -311,7 +311,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor at c0000000 {
+	nor: nor at 0,00000000 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
@@ -321,7 +321,7 @@
 		#size-cells = <1>;
 	};
 
-	sram: sram at c8000000 {
+	sram: sram at 1,00000000 {
 		compatible = "mtd-ram";
 		reg = <1 0x00000000 0x00800000>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 009abd6..fde8b31 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -446,9 +446,9 @@
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "disabled"; /* pin conflict with SPI NOR */
 
-	nor at 0,0 {
+	nor at 0,00000000 {
 		compatible = "cfi-flash";
-		reg = <0 0 0x02000000>;
+		reg = <0 0x00000000 0x02000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		bank-width = <2>;
-- 
1.8.3.2

             reply	other threads:[~2014-04-08 15:54 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-08 15:54 Alexander Shiyan [this message]
2014-04-09  3:21 ` [PATCH] ARM: dts: i.MX: Use single naming style for i.MX WEIM devices Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1396972483-2342-1-git-send-email-shc_work@mail.ru \
    --to=shc_work@mail.ru \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).