From: chander.kashyap@linaro.org (Chander Kashyap)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: exynos: generalize power register address calculation
Date: Wed, 9 Apr 2014 16:39:43 +0530 [thread overview]
Message-ID: <1397041783-18531-1-git-send-email-chander.kashyap@linaro.org> (raw)
In-Reply-To: <1396973737-18693-1-git-send-email-chander.kashyap@linaro.org>
Currently status/configuration power register values are hard-coded for cpu1.
Make it generic so that it is useful for SoC's with more than two cpus.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
---
changes in v2 : Used existing macros for clusterid and cpuid calculation
arch/arm/mach-exynos/hotplug.c | 15 ++++++++++++---
arch/arm/mach-exynos/platsmp.c | 20 +++++++++++++++-----
arch/arm/mach-exynos/regs-pmu.h | 9 +++++++--
3 files changed, 34 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 5eead53..eab6121 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -17,6 +17,7 @@
#include <asm/cacheflush.h>
#include <asm/cp15.h>
+#include <asm/cputype.h>
#include <asm/smp_plat.h>
#include <plat/cpu.h>
@@ -92,11 +93,19 @@ static inline void cpu_leave_lowpower(void)
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
+ unsigned int mpidr, cpunr, cluster;
+
+ mpidr = cpu_logical_map(cpu);
+ cpunr = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ /* Maximum possible cpus in a cluster can be 4 */
+ cpunr += cluster * 4;
for (;;) {
- /* make cpu1 to be turned off at next WFI command */
- if (cpu == 1)
- __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
+ /* make cpu to be turned off at next WFI command */
+ if (cpu)
+ __raw_writel(0, S5P_ARM_CORE_CONFIGURATION(cpunr));
/*
* here's the WFI
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 8ea02f6..8d06b2c 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/cputype.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include <asm/firmware.h>
@@ -92,6 +93,14 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
unsigned long phys_cpu = cpu_logical_map(cpu);
+ unsigned int mpidr, cpunr, cluster;
+
+ mpidr = cpu_logical_map(cpu);
+ cpunr = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ /* Maximum possible cpus in a cluster can be 4 */
+ cpunr += cluster * 4;
/*
* Set synchronisation state between this boot processor
@@ -109,14 +118,15 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
write_pen_release(phys_cpu);
- if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
+ if (!(__raw_readl(S5P_ARM_CORE_STATUS(cpunr))
+ & S5P_CORE_LOCAL_PWR_EN)) {
__raw_writel(S5P_CORE_LOCAL_PWR_EN,
- S5P_ARM_CORE1_CONFIGURATION);
+ S5P_ARM_CORE_CONFIGURATION(cpunr));
timeout = 10;
- /* wait max 10 ms until cpu1 is on */
- while ((__raw_readl(S5P_ARM_CORE1_STATUS)
+ /* wait max 10 ms until secondary cpu is on */
+ while ((__raw_readl(S5P_ARM_CORE_STATUS(cpunr))
& S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
if (timeout-- == 0)
break;
@@ -125,7 +135,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
}
if (timeout == 0) {
- printk(KERN_ERR "cpu1 power enable failed");
+ pr_err("cpu%x power enable failed", cpu);
spin_unlock(&boot_lock);
return -ETIMEDOUT;
}
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 7c029ce..16e17e4 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -104,8 +104,13 @@
#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C)
#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
-#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080)
-#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084)
+#define S5P_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
+#define S5P_ARM_CORE0_STATUS S5P_PMUREG(0x2004)
+
+#define S5P_ARM_CORE_CONFIGURATION(_cpunr) \
+ (S5P_ARM_CORE0_CONFIGURATION + 0x80 * _cpunr)
+#define S5P_ARM_CORE_STATUS(_cpunr) \
+ (S5P_ARM_CORE0_STATUS + 0x80 * _cpunr)
#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028)
#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108)
--
1.7.9.5
next prev parent reply other threads:[~2014-04-09 11:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-08 16:15 [PATCH] arm: exynos: generalize power register address calculation Chander Kashyap
2014-04-09 11:09 ` Chander Kashyap [this message]
2014-04-09 11:49 ` Tomasz Figa
2014-04-09 13:49 ` Chander Kashyap
2014-04-09 14:45 ` Tomasz Figa
2014-04-10 5:48 ` Chander Kashyap
2014-04-14 4:27 ` Chander Kashyap
2014-04-14 17:20 ` Tomasz Figa
2014-04-14 17:28 ` Tomasz Figa
2014-04-15 3:58 ` Chander Kashyap
2014-04-15 7:38 ` Chander Kashyap
2014-04-18 14:12 ` Tomasz Figa
2014-04-20 6:39 ` Chander Kashyap
2014-04-21 8:29 ` [PATCH v4] " Chander Kashyap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397041783-18531-1-git-send-email-chander.kashyap@linaro.org \
--to=chander.kashyap@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).