From mboxrd@z Thu Jan 1 00:00:00 1970 From: l.stach@pengutronix.de (Lucas Stach) Date: Fri, 11 Apr 2014 16:59:36 +0200 Subject: [PATCH 2/6] ARM: dts: highbank, ecx-2000: drop address and size cells from GIC node In-Reply-To: <1397228380-7352-1-git-send-email-l.stach@pengutronix.de> References: <1397228380-7352-1-git-send-email-l.stach@pengutronix.de> Message-ID: <1397228380-7352-2-git-send-email-l.stach@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach --- arch/arm/boot/dts/ecx-2000.dts | 2 -- arch/arm/boot/dts/highbank.dts | 2 -- 2 files changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index 2ccbb57fbfa8..cdb7b264b7fb 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -94,8 +94,6 @@ intc: interrupt-controller at fff11000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; interrupt-controller; interrupts = <1 9 0xf04>; reg = <0xfff11000 0x1000>, diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index ed14aeac0566..85e1a05b8a9c 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -109,8 +109,6 @@ intc: interrupt-controller at fff11000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; interrupt-controller; reg = <0xfff11000 0x1000>, <0xfff10100 0x100>; -- 1.9.1