[PATCH v3 1/4] reset: add driver for socfpga

[PATCH v3 1/4] reset: add driver for socfpga

[Steffen Trumtrar]

Add a reset-controller driver for the socfpga platform.
The reset-controller has four banks with up to 32 entries all encapsulated in
one module block.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---

Notes:
    Changes since v2:
    	- remove superfluous ret in probe function
    	- add Acked-by
    
    Changes since v1:
    	- use BITS_PER_LONG everywhere instead of MAX_BANK_WIDTH
    	- print pdev->dev.of_node->full_name on error
    	- use proper IS_ERR/PTR_ERR

 drivers/reset/Makefile        |   1 +
 drivers/reset/reset-socfpga.c | 146 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 147 insertions(+)
 create mode 100644 drivers/reset/reset-socfpga.c

diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index cc29832..ab64077 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_RESET_CONTROLLER) += core.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
+obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
new file mode 100644
index 0000000..79c32ca
--- /dev/null
+++ b/drivers/reset/reset-socfpga.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * based on
+ * Allwinner SoCs Reset Controller driver
+ *
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define NR_BANKS		4
+#define OFFSET_MODRST		0x10
+
+struct socfpga_reset_data {
+	spinlock_t			lock;
+	void __iomem			*membase;
+	struct reset_controller_dev	rcdev;
+};
+
+static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct socfpga_reset_data *data = container_of(rcdev,
+						     struct socfpga_reset_data,
+						     rcdev);
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS));
+	writel(reg | BIT(offset), data->membase + OFFSET_MODRST +
+				 (bank * NR_BANKS));
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	struct socfpga_reset_data *data = container_of(rcdev,
+						     struct socfpga_reset_data,
+						     rcdev);
+
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS));
+	writel(reg & ~BIT(offset), data->membase + OFFSET_MODRST +
+				  (bank * NR_BANKS));
+
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static struct reset_control_ops socfpga_reset_ops = {
+	.assert		= socfpga_reset_assert,
+	.deassert	= socfpga_reset_deassert,
+};
+
+static int socfpga_reset_probe(struct platform_device *pdev)
+{
+	struct socfpga_reset_data *data;
+	struct resource *res;
+
+	/*
+	 * The binding was mainlined without the required property.
+	 * Do not continue, when we encounter an old DT.
+	 */
+	if (!of_find_property(pdev->dev.of_node, "#reset-cells", NULL)) {
+		dev_err(&pdev->dev, "%s missing #reset-cells property\n",
+			pdev->dev.of_node->full_name);
+		return -EINVAL;
+	}
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->membase))
+		return PTR_ERR(data->membase);
+
+	spin_lock_init(&data->lock);
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = NR_BANKS * BITS_PER_LONG;
+	data->rcdev.ops = &socfpga_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+	reset_controller_register(&data->rcdev);
+
+	return 0;
+}
+
+static int socfpga_reset_remove(struct platform_device *pdev)
+{
+	struct socfpga_reset_data *data = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&data->rcdev);
+
+	return 0;
+}
+
+static const struct of_device_id socfpga_reset_dt_ids[] = {
+	{ .compatible = "altr,rst-mgr", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver socfpga_reset_driver = {
+	.probe	= socfpga_reset_probe,
+	.remove	= socfpga_reset_remove,
+	.driver = {
+		.name		= "socfpga-reset",
+		.owner		= THIS_MODULE,
+		.of_match_table	= socfpga_reset_dt_ids,
+	},
+};
+module_platform_driver(socfpga_reset_driver);
+
+MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de");
+MODULE_DESCRIPTION("Socfpga Reset Controller Driver");
+MODULE_LICENSE("GPL");
-- 
1.9.1

[PATCH v3 2/4] Documentation: dt: socfpga: add reset-cells property

[Steffen Trumtrar]

To be able to use the reset-controller framework, the property
	#reset-cells
is mandatory.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt
index ecdb57d..32c1c8b 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt
@@ -3,9 +3,11 @@ Altera SOCFPGA Reset Manager
 Required properties:
 - compatible : "altr,rst-mgr"
 - reg : Should contain 1 register ranges(address and length)
+- #reset-cells: 1
 
 Example:
 	 rstmgr at ffd05000 {
+		#reset-cells = <1>;
 		compatible = "altr,rst-mgr";
 		reg = <0xffd05000 0x1000>;
 	};
-- 
1.9.1

[PATCH v3 3/4] Documentation: dt: reset: move socfpga-reset

[Steffen Trumtrar]

Instead of having the documentation for the socfpga-reset controller in a
vendor specific directory, move it to the reset folder to all the other
reset drivers.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 Documentation/devicetree/bindings/{arm/altera => reset}/socfpga-reset.txt | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename Documentation/devicetree/bindings/{arm/altera => reset}/socfpga-reset.txt (100%)

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
similarity index 100%
rename from Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt
rename to Documentation/devicetree/bindings/reset/socfpga-reset.txt
-- 
1.9.1

[PATCH v3 4/4] ARM: socfpga: dts: add reset-controller

[Steffen Trumtrar]

Add the necessary #reset-cells property to the rst-mgr node and
provide a header-file with all possible resets specified.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 arch/arm/boot/dts/socfpga.dtsi           |  8 ++-
 include/dt-bindings/reset/altr,rst-mgr.h | 90 ++++++++++++++++++++++++++++++++
 2 files changed, 97 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/reset/altr,rst-mgr.h

diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 1f71e96..027d2c6 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -16,6 +16,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/reset/altr,rst-mgr.h>
 
 / {
 	#address-cells = <1>;
@@ -456,6 +457,8 @@
 			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
 			clocks = <&emac0_clk>;
 			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -467,6 +470,8 @@
 			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
 			clocks = <&emac1_clk>;
 			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -584,7 +589,8 @@
 			reg-io-width = <4>;
 		};
 
-		rstmgr at ffd05000 {
+		rst: rstmgr at ffd05000 {
+			#reset-cells = <1>;
 			compatible = "altr,rst-mgr";
 			reg = <0xffd05000 0x1000>;
 		};
diff --git a/include/dt-bindings/reset/altr,rst-mgr.h b/include/dt-bindings/reset/altr,rst-mgr.h
new file mode 100644
index 0000000..3f04908
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+
+/* MPUMODRST */
+#define CPU0_RESET		0
+#define CPU1_RESET		1
+#define WDS_RESET		2
+#define SCUPER_RESET		3
+#define L2_RESET		4
+
+/* PERMODRST */
+#define EMAC0_RESET		32
+#define EMAC1_RESET		33
+#define USB0_RESET		34
+#define USB1_RESET		35
+#define NAND_RESET		36
+#define QSPI_RESET		37
+#define L4WD0_RESET		38
+#define L4WD1_RESET		39
+#define OSC1TIMER0_RESET	40
+#define OSC1TIMER1_RESET	41
+#define SPTIMER0_RESET		42
+#define SPTIMER1_RESET		43
+#define I2C0_RESET		44
+#define I2C1_RESET		45
+#define I2C2_RESET		46
+#define I2C3_RESET		47
+#define UART0_RESET		48
+#define UART1_RESET		49
+#define SPIM0_RESET		50
+#define SPIM1_RESET		51
+#define SPIS0_RESET		52
+#define SPIS1_RESET		53
+#define SDMMC_RESET		54
+#define CAN0_RESET		55
+#define CAN1_RESET		56
+#define GPIO0_RESET		57
+#define GPIO1_RESET		58
+#define GPIO2_RESET		59
+#define DMA_RESET		60
+#define SDR_RESET		61
+
+/* PER2MODRST */
+#define DMAIF0_RESET		64
+#define DMAIF1_RESET		65
+#define DMAIF2_RESET		66
+#define DMAIF3_RESET		67
+#define DMAIF4_RESET		68
+#define DMAIF5_RESET		69
+#define DMAIF6_RESET		70
+#define DMAIF7_RESET		71
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET		96
+#define LWHPS2FPGA_RESET	97
+#define FPGA2HPS_RESET		98
+
+/* MISCMODRST*/
+#define ROM_RESET		128
+#define OCRAM_RESET		129
+#define SYSMGR_RESET		130
+#define SYSMGRCOLD_RESET	131
+#define FPGAMGR_RESET		132
+#define ACPIDMAP_RESET		133
+#define S2F_RESET		134
+#define S2FCOLD_RESET		135
+#define NRSTPIN_RESET		136
+#define TIMESTAMPCOLD_RESET	137
+#define CLKMGRCOLD_RESET	138
+#define SCANMGR_RESET		139
+#define FRZCTRLCOLD_RESET	140
+#define SYSDBG_RESET		141
+#define DBG_RESET		142
+#define TAPCOLD_RESET		143
+#define SDRCOLD_RESET		144
+
+#endif
-- 
1.9.1

[PATCH v3 1/4] reset: add driver for socfpga

[Dinh Nguyen]

On Tue, 2014-04-15 at 09:56 +0200, Steffen Trumtrar wrote:
> Add a reset-controller driver for the socfpga platform.
> The reset-controller has four banks with up to 32 entries all encapsulated in
> one module block.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> 
> Notes:
>     Changes since v2:
>     	- remove superfluous ret in probe function
>     	- add Acked-by
>     
>     Changes since v1:
>     	- use BITS_PER_LONG everywhere instead of MAX_BANK_WIDTH
>     	- print pdev->dev.of_node->full_name on error
>     	- use proper IS_ERR/PTR_ERR
> 

I've applied this series to rocketboards linux-socfpga-next/drivers and
linux-socfpga-next/next-dt.

Thanks,

Dinh

[PATCH v3 1/4] reset: add driver for socfpga

[Steffen Trumtrar]

On Tue, Apr 15, 2014 at 05:54:43PM -0500, Dinh Nguyen wrote:
> On Tue, 2014-04-15 at 09:56 +0200, Steffen Trumtrar wrote:
> > Add a reset-controller driver for the socfpga platform.
> > The reset-controller has four banks with up to 32 entries all encapsulated in
> > one module block.
> > 
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> > ---
> > 
> > Notes:
> >     Changes since v2:
> >     	- remove superfluous ret in probe function
> >     	- add Acked-by
> >     
> >     Changes since v1:
> >     	- use BITS_PER_LONG everywhere instead of MAX_BANK_WIDTH
> >     	- print pdev->dev.of_node->full_name on error
> >     	- use proper IS_ERR/PTR_ERR
> > 
> 
> I've applied this series to rocketboards linux-socfpga-next/drivers and
> linux-socfpga-next/next-dt.
> 

\o/

Thanks,
Steffen

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH v3 1/4] reset: add driver for socfpga

[Dinh Nguyen]

On Tue, 2014-04-15 at 09:56 +0200, Steffen Trumtrar wrote:
> Add a reset-controller driver for the socfpga platform.
> The reset-controller has four banks with up to 32 entries all encapsulated in
> one module block.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> 
> Notes:
>     Changes since v2:
>     	- remove superfluous ret in probe function
>     	- add Acked-by
>     
>     Changes since v1:
>     	- use BITS_PER_LONG everywhere instead of MAX_BANK_WIDTH
>     	- print pdev->dev.of_node->full_name on error
>     	- use proper IS_ERR/PTR_ERR
> 

I've applied this series to rocketboards linux-socfpga-next/drivers and
linux-socfpga-next/next-dt.

Thanks,

Dinh