From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk
Date: Wed, 27 Jun 2012 14:50:47 +0200 [thread overview]
Message-ID: <1397795.nxQGnEDtVe@avalon> (raw)
In-Reply-To: <1340372890-10091-1-git-send-email-rnayak@ti.com>
Hi Rajendra,
On Friday 22 June 2012 19:17:59 Rajendra Nayak wrote:
> Hi,
>
> This is a preparatory series for the OMAP Common Clk
> conversion. They mostly add clk_prepare/clk_unprepare
> in OMAP drivers and platform code. Also gets
> rid of omap_clk_get_by_name() and uses clk_get(), and
> removes all direct 'struct clk' dereferrencing and
> uses helpers similar to what is provided by Common
> Clk.
I think you've missed drivers/media/video/omap3isp/isp.c. Should I send a
patch for that ? Do these changes depend on anything not yet in mainline that
I should apply to my tree for testing ?
> Patches are boot tested on OMAP2430sdp, 3630 Beagle-Xm
> and 4460 Panda.
>
> Some of these patches were earlier posted as part of
> OMAP2+ Common Clk conversion series [1] which is now
> split into a preparatory series and actual CCF conversion
> series.
>
> Patches from this series can be found here
> git://github.com/rrnayak/linux.git prepare-common-clk-3.5-rc3
>
> regards,
> Rajendra
>
> [1] http://www.mail-archive.com/linux-omap at vger.kernel.org/msg70299.html
>
> Rajendra Nayak (11):
> ARM: omap: clk: add clk_prepare and clk_unprepare
> mmc: omap: add clk_prepare and clk_unprepare
> hwrng: omap: add clk_prepare and clk_unprepare
> mfd: omap-usb: add clk_prepare and clk_unprepare
> OMAPDSS: add clk_prepare and clk_unprepare
> gpio/omap: add clk_prepare and clk_unprepare
> w1: omap_hdq: add clk_prepare and clk_unprepare
> crypto: omap: add clk_prepare and clk_unprepare
> iommu: omap: add clk_prepare and clk_unprepare
> ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage
> ARM: omap: clk: Remove all direct dereferencing of struct clk
>
> arch/arm/mach-omap2/board-apollon.c | 4 +-
> arch/arm/mach-omap2/board-h4.c | 6 +-
> arch/arm/mach-omap2/board-omap4panda.c | 2 +-
> arch/arm/mach-omap2/clkt2xxx_apll.c | 2 +-
> arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 4 +-
> arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 18 +++---
> arch/arm/mach-omap2/clkt_clksel.c | 84 ++++++++++++++++-------
> arch/arm/mach-omap2/clkt_dpll.c | 24 ++++---
> arch/arm/mach-omap2/clock.c | 9 ++-
> arch/arm/mach-omap2/clock2420_data.c | 17 +++++
> arch/arm/mach-omap2/clock2430_data.c | 21 +++++++
> arch/arm/mach-omap2/clock3xxx.c | 8 +-
> arch/arm/mach-omap2/clock3xxx_data.c | 24 +++++++
> arch/arm/mach-omap2/clock44xx_data.c | 17 +++++
> arch/arm/mach-omap2/display.c | 4 +-
> arch/arm/mach-omap2/dpll3xxx.c | 45 ++++++++------
> arch/arm/mach-omap2/gpmc.c | 2 +-
> arch/arm/mach-omap2/omap_hwmod.c | 21 ++++---
> arch/arm/mach-omap2/omap_phy_internal.c | 3 +
> arch/arm/mach-omap2/pm.c | 2 +-
> arch/arm/mach-omap2/pm24xx.c | 2 +
> arch/arm/mach-omap2/usb-fs.c | 4 +-
> arch/arm/plat-omap/include/plat/clock.h | 4 +
> arch/arm/plat-omap/omap_device.c | 6 +-
> drivers/char/hw_random/omap-rng.c | 6 +-
> drivers/crypto/omap-aes.c | 2 +
> drivers/crypto/omap-sham.c | 2 +
> drivers/gpio/gpio-omap.c | 2 +
> drivers/iommu/omap-iommu.c | 2 +
> drivers/mfd/omap-usb-host.c | 20 ++++++
> drivers/mmc/host/omap.c | 9 ++-
> drivers/mmc/host/omap_hsmmc.c | 6 +-
> drivers/video/omap2/dss/dsi.c | 5 +-
> drivers/video/omap2/dss/hdmi.c | 5 +-
> drivers/video/omap2/dss/venc.c | 5 +-
> drivers/w1/masters/omap_hdq.c | 8 +-
> 36 files changed, 292 insertions(+), 113 deletions(-)
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2012-06-27 12:50 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-22 13:47 [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk Rajendra Nayak
2012-06-22 13:48 ` [PATCH 01/11] ARM: omap: clk: add clk_prepare and clk_unprepare Rajendra Nayak
2012-06-22 17:42 ` Pankaj Jangra
2012-06-25 5:36 ` Rajendra Nayak
2012-06-22 13:48 ` [PATCH 02/11] mmc: omap: " Rajendra Nayak
2012-06-22 18:23 ` S, Venkatraman
2012-06-22 18:34 ` Paul Walmsley
2012-06-25 5:25 ` Rajendra Nayak
2012-06-25 6:18 ` Paul Walmsley
2012-06-25 7:13 ` Rajendra Nayak
2012-06-25 5:32 ` Rajendra Nayak
2012-06-22 13:48 ` [PATCH 03/11] hwrng: " Rajendra Nayak
2012-06-22 13:48 ` [PATCH 04/11] mfd: omap-usb: " Rajendra Nayak
2012-06-22 19:04 ` Paul Walmsley
2012-06-25 8:55 ` Munegowda, Keshava
2012-06-22 13:48 ` [PATCH 05/11] OMAPDSS: " Rajendra Nayak
2012-06-25 6:07 ` Tomi Valkeinen
2012-06-25 6:59 ` Rajendra Nayak
2012-06-25 7:58 ` Tomi Valkeinen
2012-06-25 11:48 ` Rajendra Nayak
2012-06-25 13:14 ` Tomi Valkeinen
2012-06-26 5:00 ` Rajendra Nayak
2012-06-26 6:55 ` Tomi Valkeinen
2012-06-26 7:36 ` Rajendra Nayak
2012-06-27 0:47 ` Mike Turquette
2012-06-27 4:19 ` Tomi Valkeinen
2012-06-27 5:19 ` Rajendra Nayak
2012-06-25 11:22 ` Russell King - ARM Linux
2012-06-22 13:48 ` [PATCH 06/11] gpio/omap: " Rajendra Nayak
2012-06-22 15:57 ` Pankaj Jangra
2012-06-22 19:17 ` Paul Walmsley
2012-06-25 5:30 ` Rajendra Nayak
2012-06-25 6:11 ` DebBarma, Tarun Kanti
2012-06-25 7:02 ` Rajendra Nayak
2012-06-25 10:22 ` DebBarma, Tarun Kanti
2012-06-22 13:48 ` [PATCH 07/11] w1: omap_hdq: " Rajendra Nayak
2012-06-22 18:35 ` Paul Walmsley
2012-06-25 5:25 ` Rajendra Nayak
2012-06-22 13:48 ` [PATCH 08/11] crypto: omap: " Rajendra Nayak
2012-06-22 18:58 ` Paul Walmsley
2012-06-25 5:29 ` Rajendra Nayak
2012-06-26 10:39 ` Paul Walmsley
2012-06-26 10:58 ` Rajendra Nayak
2012-06-22 13:48 ` [PATCH 09/11] iommu: " Rajendra Nayak
2012-06-22 13:48 ` [PATCH 10/11] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage Rajendra Nayak
2012-06-22 13:48 ` [PATCH 11/11] ARM: omap: clk: Remove all direct dereferencing of struct clk Rajendra Nayak
2012-06-27 12:50 ` Laurent Pinchart [this message]
2012-06-27 16:36 ` [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk Paul Walmsley
2012-06-27 18:05 ` Laurent Pinchart
2012-06-27 18:45 ` Laurent Pinchart
2012-06-27 19:56 ` Laurent Pinchart
2012-06-27 19:59 ` Paul Walmsley
2012-06-27 20:25 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397795.nxQGnEDtVe@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).