linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: manabian@gmail.com (Joachim Eastwood)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] Support for Variscite OM44 modules and boards
Date: Fri, 18 Apr 2014 17:10:45 +0200	[thread overview]
Message-ID: <1397833849-22396-1-git-send-email-manabian@gmail.com> (raw)

Hello,

This patch set adds support for Variscite OM44 series of system on modules and boards.

Patch 1: Add support for the SoM itself and the reference carrier board. Together these make the VAR-STK-OM44 dev kit.

Patch 2: Add support for VAR-DVK-OM44 which is just the STK with a LCD display.

Last two patches add support for the WLAN/BT version of the SoM. If DT bindings for wl12xx gets ready for 3.16 the last patch, adding quirks, can be dropped.

Note that patch 1 relies upon a patch from Tomi Valkeinen add hpd-gpio (hotplug detect) to the "hdmi-connector".
See: http://marc.info/?l=linux-omap&m=139771947508021&w=2

Patch 2 also relies upon a patch from Tomi that adds DT support to panel-dpi.
See: http://marc.info/?l=devicetree&m=139030201815380&w=2

If it makes it easier to merge this patch set without the two dependencies above I can move the display stuff the separate patches.
This patch set replace the patch posted eariler here: http://marc.info/?l=linux-omap&m=139732809411445&w=2

Joachim Eastwood (4):
  ARM: dts: Add support for OMAP4 Variscite OM44 family
  ARM: dts: Add support for OMAP4 VAR-DVK-OM44
  ARM: dts: Add VAR-SOM-OM44 WLAN nodes
  ARM: OMAP2+: Use pdata quirks for wl12xx on VAR-STK/DVK-OM44

 .../devicetree/bindings/arm/omap/omap.txt          |   6 +
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   3 +-
 arch/arm/boot/dts/omap4-var-dvk-om44.dts           |  71 +++++
 arch/arm/boot/dts/omap4-var-om44customboard.dtsi   | 235 ++++++++++++++
 arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi     |  68 ++++
 arch/arm/boot/dts/omap4-var-som-om44.dtsi          | 343 +++++++++++++++++++++
 arch/arm/boot/dts/omap4-var-som.dts                |  96 ------
 arch/arm/boot/dts/omap4-var-stk-om44.dts           |  17 +
 arch/arm/mach-omap2/pdata-quirks.c                 |   7 +
 10 files changed, 750 insertions(+), 97 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap4-var-dvk-om44.dts
 create mode 100644 arch/arm/boot/dts/omap4-var-om44customboard.dtsi
 create mode 100644 arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
 create mode 100644 arch/arm/boot/dts/omap4-var-som-om44.dtsi
 delete mode 100644 arch/arm/boot/dts/omap4-var-som.dts
 create mode 100644 arch/arm/boot/dts/omap4-var-stk-om44.dts

-- 
1.8.0

             reply	other threads:[~2014-04-18 15:10 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-18 15:10 Joachim Eastwood [this message]
2014-04-18 15:10 ` [PATCH 1/4] ARM: dts: Add support for OMAP4 Variscite OM44 family Joachim Eastwood
2014-04-18 15:57   ` Tony Lindgren
2014-04-18 16:17     ` Joachim Eastwood
2014-04-18 17:29       ` Tony Lindgren
2014-04-18 18:03         ` Joachim Eastwood
2014-04-18 22:44           ` Tony Lindgren
2014-04-30  1:24   ` Joachim Eastwood
2014-04-30  6:19     ` Tomi Valkeinen
2014-04-18 15:10 ` [PATCH 2/4] ARM: dts: Add support for OMAP4 VAR-DVK-OM44 Joachim Eastwood
2014-04-18 15:10 ` [PATCH 3/4] ARM: dts: Add VAR-SOM-OM44 WLAN nodes Joachim Eastwood
2014-04-18 15:10 ` [PATCH 4/4] ARM: OMAP2+: Use pdata quirks for wl12xx on VAR-STK/DVK-OM44 Joachim Eastwood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1397833849-22396-1-git-send-email-manabian@gmail.com \
    --to=manabian@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).