linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: b32955@freescale.com (Huang Shijie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 0/7] mtd: spi-nor: Add the DDR quad read support
Date: Wed, 23 Apr 2014 18:16:48 +0800	[thread overview]
Message-ID: <1398248215-26768-1-git-send-email-b32955@freescale.com> (raw)
In-Reply-To: <a>

 (0) This patch set depends on the patch:
	http://lists.infradead.org/pipermail/linux-mtd/2014-April/053308.html

  
 (1) This patch set tries to add the DDR quad read support for the SPI
     NOR framework, and it also adds the DDR quad read support for FREESCALE
     quadspi controller driver.

 (2) Test this patch set with Spansion s25fl128s, the performance with mtd_speedtest.ko:
     =================================================
     mtd_speedtest: MTD device: 0
     mtd_speedtest: not NAND flash, assume page size is 512 bytes.
     mtd_speedtest: MTD device size 16777216, eraseblock size 65536, page size 512,
                    count of eraseblocks 256, pages per eraseblock 128, OOB size 0
     mtd_speedtest: testing eraseblock write speed
     mtd_speedtest: eraseblock write speed is 665 KiB/s
     mtd_speedtest: testing eraseblock read speed
     mtd_speedtest: eraseblock read speed is 49799 KiB/s
     mtd_speedtest: testing page write speed
     mtd_speedtest: page write speed is 662 KiB/s
     mtd_speedtest: testing page read speed
     mtd_speedtest: page read speed is 24236 KiB/s
     mtd_speedtest: testing 2 page write speed
     mtd_speedtest: 2 page write speed is 657 KiB/s
     mtd_speedtest: testing 2 page read speed
     mtd_speedtest: 2 page read speed is 32637 KiB/s
     mtd_speedtest: Testing erase speed
     mtd_speedtest: erase speed is 518 KiB/s
     mtd_speedtest: Testing 2x multi-block erase speed
     mtd_speedtest: 2x multi-block erase speed is 506 KiB/s
     mtd_speedtest: Testing 4x multi-block erase speed
     mtd_speedtest: 4x multi-block erase speed is 503 KiB/s
     mtd_speedtest: Testing 8x multi-block erase speed
     mtd_speedtest: 8x multi-block erase speed is 501 KiB/s
     mtd_speedtest: Testing 16x multi-block erase speed
     mtd_speedtest: 16x multi-block erase speed is 498 KiB/s
     mtd_speedtest: Testing 32x multi-block erase speed
     mtd_speedtest: 32x multi-block erase speed is 496 KiB/s
     mtd_speedtest: Testing 64x multi-block erase speed
     mtd_speedtest: 64x multi-block erase speed is 495 KiB/s
     mtd_speedtest: finished
     =================================================

  (3) Conclusion:
     The DDR quad read could be 49799 KiB/s.
     
Changlog:
  About this patch set:
     For patch 1, please see the old discusstion:
     http://lists.infradead.org/pipermail/linux-mtd/2014-April/053370.html

     For patch 2, please see the old discusstion:
     http://lists.infradead.org/pipermail/linux-mtd/2014-April/053374.html

     
Huang Shijie (7):
  mtd: spi-nor: fix the wrong dummy value
  mtd: spi-nor: add DDR quad read support
  Documentation: mtd: add a new document for SPI NOR flash
  Documentation: fsl-quadspi: update the document
  mtd: fsl-quadspi: get the dummy cycles for DDR Quad read from the DT
    property
  mtd: fsl-quadspi: use the information stored in spi-nor{}
  mtd: fsl-quadspi: add the DDR quad read support

 .../devicetree/bindings/mtd/fsl-quadspi.txt        |   16 +++
 .../devicetree/bindings/mtd/spi-nor-flash.txt      |    7 +
 drivers/mtd/devices/m25p80.c                       |    5 +-
 drivers/mtd/spi-nor/fsl-quadspi.c                  |  121 +++++++++++++-------
 drivers/mtd/spi-nor/spi-nor.c                      |   52 ++++++++-
 include/linux/mtd/spi-nor.h                        |    8 +-
 6 files changed, 162 insertions(+), 47 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/spi-nor-flash.txt

-- 
1.7.2.rc3

  parent reply	other threads:[~2014-04-23 10:16 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <a>
2011-11-22 15:54 ` [PATCH v7 0/3] ARM: mxs: add recording support for saif Dong Aisheng
2011-11-24  7:36   ` Shawn Guo
2011-11-24  7:46     ` Shawn Guo
2011-11-24  7:41       ` Uwe Kleine-König
2011-11-24  7:49       ` Wolfram Sang
2011-11-24  8:23         ` Shawn Guo
2011-11-24 10:46           ` Wolfram Sang
2011-11-22 15:54 ` [PATCH v7 1/3] ARM: mxs: add saif clkmux functions Dong Aisheng
2011-11-22 15:54 ` [PATCH v7 2/3] ARM: mx28evk: add platform data for saif Dong Aisheng
2011-11-22 15:54 ` [PATCH v7 3/3] ARM: mx28evk: set a initial clock rate " Dong Aisheng
2012-03-13 12:33 ` [PATCH 1/5 v4] i2c/gpio: add DT support Jean-Christophe PLAGNIOL-VILLARD
2012-03-13 14:08   ` Wolfram Sang
2012-03-13 16:47     ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-13 19:46       ` Wolfram Sang
2012-03-15 15:56   ` [PATCH 1/5 v5] " Jean-Christophe PLAGNIOL-VILLARD
2012-03-13 12:33 ` [PATCH 2/5 v4] ARM: at91: sam9g20 add i2c " Jean-Christophe PLAGNIOL-VILLARD
2012-03-13 12:33 ` [PATCH 3/5 v4] ARM: at91: usb_a9g20 add DT i2c support Jean-Christophe PLAGNIOL-VILLARD
2012-03-13 12:33 ` [PATCH 4/5 v4] ARM: at91: sam9g45 add i2c DT support Jean-Christophe PLAGNIOL-VILLARD
2012-03-13 12:33 ` [PATCH 5/5 v4] ARM: at91: sam9x5 " Jean-Christophe PLAGNIOL-VILLARD
2013-08-13 13:31 ` [PATCH V2 00/35] CPUFreq: Implement light weight ->target(): for 3.13 Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 01/35] cpufreq: Implement light weight ->target_index() routine Viresh Kumar
2013-08-18 10:41     ` amit daniel kachhap
2013-08-19  4:37       ` Viresh Kumar
2013-08-19  6:16         ` amit daniel kachhap
2013-08-19  6:19           ` Viresh Kumar
2013-08-19  6:46             ` amit daniel kachhap
2013-08-19  6:49               ` Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 02/35] cpufreq: remove CONFIG_CPU_FREQ_TABLE Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 03/35] cpufreq: acpi: Covert to light weight ->target_index() routine Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 04/35] cpufreq: arm_big_little: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 05/35] cpufreq: at32ap: " Viresh Kumar
2013-08-14  8:00     ` Hans-Christian Egtvedt
2013-08-13 13:32   ` [PATCH V2 06/35] cpufreq: blackfin: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 07/35] cpufreq: cpu0: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 08/35] cpufreq: cris: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 09/35] cpufreq: davinci: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 10/35] cpufreq: dbx500: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 11/35] cpufreq: e_powersaver: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 12/35] cpufreq: elanfreq: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 13/35] cpufreq: exynos: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 14/35] cpufreq: ia64: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 15/35] cpufreq: imx6q: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 16/35] cpufreq: kirkwood: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 17/35] cpufreq: longhaul: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 18/35] cpufreq: loongson2: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 19/35] cpufreq: maple: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 20/35] cpufreq: omap: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 21/35] cpufreq: p4: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 22/35] cpufreq: pasemi: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 23/35] cpufreq: pmac32: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 24/35] cpufreq: powernow: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 25/35] cpufreq: ppc: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 26/35] cpufreq: pxa: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 27/35] cpufreq: s3c2416: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 28/35] cpufreq: s3c64xx: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 29/35] cpufreq: s5pv210: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 30/35] cpufreq: sa11x0: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 31/35] cpufreq: sc520: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 32/35] cpufreq: sparc: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 33/35] cpufreq: SPEAr: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 34/35] cpufreq: speedstep: " Viresh Kumar
2013-08-13 13:32   ` [PATCH V2 35/35] cpufreq: tegra: " Viresh Kumar
2013-08-13 13:46   ` [PATCH V2 00/35] CPUFreq: Implement light weight ->target(): for 3.13 Viresh Kumar
2013-08-14  5:29   ` Viresh Kumar
2014-01-03  3:01 ` [PATCH 0/3] mtd: gpmi: add subpage read support Huang Shijie
2014-02-21  6:51   ` Huang Shijie
2014-03-07  7:27   ` Brian Norris
2014-03-07  7:32     ` Huang Shijie
2014-03-07  7:34       ` Brian Norris
2014-01-03  3:01 ` [PATCH 1/3] mtd: nand: add "page" argument for read_subpage hook Huang Shijie
2014-01-03  3:01 ` [PATCH 2/3] mtd: gpmi: do not use the mtd->writesize Huang Shijie
2014-01-03  3:01 ` [PATCH 3/3] mtd: gpmi: add subpage read support Huang Shijie
2014-04-23 10:16 ` Huang Shijie [this message]
2014-04-23 10:16 ` [PATCH v1 1/7] mtd: spi-nor: fix the wrong dummy value Huang Shijie
2014-04-23 19:41   ` Marek Vasut
2014-04-24  4:50     ` Huang Shijie
2014-04-24 13:45       ` Marek Vasut
2014-04-23 10:16 ` [PATCH v1 2/7] mtd: spi-nor: add DDR quad read support Huang Shijie
2014-04-23 19:45   ` Marek Vasut
2014-04-24  4:53     ` Huang Shijie
2014-04-24 13:43       ` Marek Vasut
2014-04-24 14:26         ` Huang Shijie
2014-04-23 10:16 ` [PATCH v1 3/7] Documentation: mtd: add a new document for SPI NOR flash Huang Shijie
2014-04-23 10:16 ` [PATCH v1 4/7] Documentation: fsl-quadspi: update the document Huang Shijie
2014-04-23 10:16 ` [PATCH v1 5/7] mtd: fsl-quadspi: get the dummy cycles for DDR Quad read from the DT property Huang Shijie
2014-04-23 19:48   ` Marek Vasut
2014-04-24  4:58     ` Huang Shijie
2014-04-24 13:41       ` Marek Vasut
2014-04-24 14:27         ` Huang Shijie
2014-04-23 10:16 ` [PATCH v1 6/7] mtd: fsl-quadspi: use the information stored in spi-nor{} Huang Shijie
2014-04-23 10:16 ` [PATCH v1 7/7] mtd: fsl-quadspi: add the DDR quad read support Huang Shijie
2024-12-01 23:46 ` [PATCH] arm64: dts: rockchip: enable rng on all rk356x Peter Robinson
2024-12-02  3:55   ` Dragan Simic
2024-12-02 10:40     ` Marcin Juszkiewicz
2024-12-02 12:01       ` Diederik de Haas
2024-12-02 14:50         ` Dragan Simic
2024-12-02 15:32           ` Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1398248215-26768-1-git-send-email-b32955@freescale.com \
    --to=b32955@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).