From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Fri, 25 Apr 2014 16:07:09 +0200 Subject: [PATCH v2 11/18] xhci-platform: Add a new controller using xhci: Armada 375 In-Reply-To: <1398434836-18908-1-git-send-email-gregory.clement@free-electrons.com> References: <1398434836-18908-1-git-send-email-gregory.clement@free-electrons.com> Message-ID: <1398434836-18908-12-git-send-email-gregory.clement@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Extend the compatible string list with armada-375-xhci. It is used to describe xhci controller which is in the Armada 375 SoC. Signed-off-by: Gregory CLEMENT --- Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index cbc91414fd59..87d150ca58cc 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -2,7 +2,8 @@ USB xHCI controllers Required properties: - compatible: should be on of "generic-xhci", - "marvell,armada-380-xhci" (deprecated: "xhci-platform"). + "marvell,armada-375-xhci", "marvell,armada-380-xhci" (deprecated: + "xhci-platform"). - reg: should contain address and length of the standard XHCI register set for the device. - interrupts: one XHCI interrupt should be described here. -- 1.8.1.2