* [PATCH 3/5] tty/serial: Add GPIOLIB helpers for controlling modem lines
2014-04-25 14:52 [PATCH 0/5] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c Richard Genoud
2014-04-25 14:52 ` [PATCH 1/5] tty/serial: atmel_serial: Fix device tree documetation Richard Genoud
2014-04-25 14:52 ` [PATCH 2/5] ARM: at91: gpio: implement get_direction Richard Genoud
@ 2014-04-25 14:52 ` Richard Genoud
2014-04-28 5:52 ` Yegor Yefremov
2014-04-25 14:52 ` [PATCH 4/5] tty/serial: at91: use mctrl_gpio helpers Richard Genoud
` (2 subsequent siblings)
5 siblings, 1 reply; 11+ messages in thread
From: Richard Genoud @ 2014-04-25 14:52 UTC (permalink / raw)
To: linux-arm-kernel
This patch add some helpers to control modem lines (CTS/RTS/DSR...) via
GPIO.
This will be useful for many boards which have a serial controller that
only handle CTS/RTS pins (or even just RX/TX).
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/serial/driver | 25 ++++++
drivers/tty/serial/Kconfig | 3 +
drivers/tty/serial/Makefile | 3 +
drivers/tty/serial/serial_mctrl_gpio.c | 143 +++++++++++++++++++++++++++++++++
drivers/tty/serial/serial_mctrl_gpio.h | 110 +++++++++++++++++++++++++
5 files changed, 284 insertions(+)
create mode 100644 drivers/tty/serial/serial_mctrl_gpio.c
create mode 100644 drivers/tty/serial/serial_mctrl_gpio.h
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index c3a7689a90e6..3bba1aeb799c 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -429,3 +429,28 @@ thus:
struct uart_port port;
int my_stuff;
};
+
+Modem control lines via GPIO
+----------------------------
+
+Some helpers are provided in order to set/get modem control lines via GPIO.
+
+mctrl_gpio_init(dev, idx):
+ This will get the {cts,rts,...}-gpios from device tree if they are
+ present and request them, set direction etc, and return an
+ allocated structure. devm_* functions are used, so there's no need
+ to call mctrl_gpio_free().
+
+mctrl_gpio_free(dev, gpios):
+ This will free the requested gpios in mctrl_gpio_init().
+ As devm_* function are used, there's generally no need to call
+ this function.
+
+mctrl_gpio_to_gpiod(gpios, gidx)
+ This returns the gpio structure associated to the modem line index.
+
+mctrl_gpio_set(gpios, mctrl):
+ This will sets the gpios according to the mctrl state.
+
+mctrl_gpio_get(gpios, mctrl):
+ This will update mctrl with the gpios values.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 5d9b01aa54f4..95afd310d18e 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1510,4 +1510,7 @@ config SERIAL_ST_ASC_CONSOLE
endmenu
+config SERIAL_MCTRL_GPIO
+ tristate
+
endif # TTY
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 3680854fef41..bcf31da267dd 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -87,3 +87,6 @@ obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
obj-$(CONFIG_SERIAL_RP2) += rp2.o
obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
+
+# GPIOLIB helpers for modem control lines
+obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
new file mode 100644
index 000000000000..bf9560ffe3f4
--- /dev/null
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -0,0 +1,143 @@
+/*
+ * Helpers for controlling modem lines via GPIO
+ *
+ * Copyright (C) 2014 Paratronic S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <uapi/asm-generic/termios.h>
+
+#include "serial_mctrl_gpio.h"
+
+struct mctrl_gpios {
+ struct gpio_desc *gpio[UART_GPIO_MAX];
+};
+
+static const struct {
+ const char *name;
+ unsigned int mctrl;
+ bool dir_out;
+} mctrl_gpios_desc[UART_GPIO_MAX] = {
+ { "cts", TIOCM_CTS, false, },
+ { "dsr", TIOCM_DSR, false, },
+ { "dcd", TIOCM_CD, false, },
+ { "rng", TIOCM_RNG, false, },
+ { "rts", TIOCM_RTS, true, },
+ { "dtr", TIOCM_DTR, true, },
+ { "out1", TIOCM_OUT1, true, },
+ { "out2", TIOCM_OUT2, true, },
+};
+
+void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
+{
+ enum mctrl_gpio_idx i;
+
+ if (IS_ERR_OR_NULL(gpios))
+ return;
+
+ for (i = 0; i < UART_GPIO_MAX; i++)
+ if (!IS_ERR_OR_NULL(gpios->gpio[i]) &&
+ mctrl_gpios_desc[i].dir_out)
+ gpiod_set_value(gpios->gpio[i],
+ !!(mctrl & mctrl_gpios_desc[i].mctrl));
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_set);
+
+struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
+ enum mctrl_gpio_idx gidx)
+{
+ if (!IS_ERR_OR_NULL(gpios) && !IS_ERR_OR_NULL(gpios->gpio[gidx]))
+ return gpios->gpio[gidx];
+ else
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod);
+
+unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
+{
+ enum mctrl_gpio_idx i;
+
+ /*
+ * return it unchanged if the structure is not allocated
+ */
+ if (IS_ERR_OR_NULL(gpios))
+ return *mctrl;
+
+ for (i = 0; i < UART_GPIO_MAX; i++) {
+ if (!IS_ERR_OR_NULL(gpios->gpio[i]) &&
+ !mctrl_gpios_desc[i].dir_out) {
+ if (gpiod_get_value(gpios->gpio[i]))
+ *mctrl |= mctrl_gpios_desc[i].mctrl;
+ else
+ *mctrl &= ~mctrl_gpios_desc[i].mctrl;
+ }
+ }
+
+ return *mctrl;
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_get);
+
+struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
+{
+ struct mctrl_gpios *gpios;
+ enum mctrl_gpio_idx i;
+ int err;
+
+ gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL);
+ if (!gpios)
+ return ERR_PTR(-ENOMEM);
+
+ for (i = 0; i < UART_GPIO_MAX; i++) {
+ gpios->gpio[i] = devm_gpiod_get_index(dev,
+ mctrl_gpios_desc[i].name,
+ idx);
+
+ /*
+ * The GPIOs are maybe not all filled,
+ * this is not an error.
+ */
+ if (IS_ERR_OR_NULL(gpios->gpio[i]))
+ continue;
+
+ if (mctrl_gpios_desc[i].dir_out)
+ err = gpiod_direction_output(gpios->gpio[i], 0);
+ else
+ err = gpiod_direction_input(gpios->gpio[i]);
+ if (err) {
+ dev_dbg(dev, "Unable to set direction for %s GPIO",
+ mctrl_gpios_desc[i].name);
+ devm_gpiod_put(dev, gpios->gpio[i]);
+ gpios->gpio[i] = NULL;
+ }
+ }
+
+ return gpios;
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_init);
+
+void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
+{
+ enum mctrl_gpio_idx i;
+
+ if (IS_ERR_OR_NULL(gpios))
+ return;
+
+ for (i = 0; i < UART_GPIO_MAX; i++)
+ if (!IS_ERR_OR_NULL(gpios->gpio[i]))
+ devm_gpiod_put(dev, gpios->gpio[i]);
+ devm_kfree(dev, gpios);
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_free);
diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h
new file mode 100644
index 000000000000..400ba0494a17
--- /dev/null
+++ b/drivers/tty/serial/serial_mctrl_gpio.h
@@ -0,0 +1,110 @@
+/*
+ * Helpers for controlling modem lines via GPIO
+ *
+ * Copyright (C) 2014 Paratronic S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __SERIAL_MCTRL_GPIO__
+#define __SERIAL_MCTRL_GPIO__
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+
+enum mctrl_gpio_idx {
+ UART_GPIO_CTS,
+ UART_GPIO_DSR,
+ UART_GPIO_DCD,
+ UART_GPIO_RNG,
+ UART_GPIO_RI = UART_GPIO_RNG,
+ UART_GPIO_RTS,
+ UART_GPIO_DTR,
+ UART_GPIO_OUT1,
+ UART_GPIO_OUT2,
+ UART_GPIO_MAX,
+};
+
+/*
+ * Opaque descriptor for modem lines controlled by GPIOs
+ */
+struct mctrl_gpios;
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Set state of the modem control output lines via GPIOs.
+ */
+void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl);
+
+/*
+ * Get state of the modem control output lines from GPIOs.
+ * The mctrl flags are updated and returned.
+ */
+unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl);
+
+/*
+ * Returns the associated struct gpio_desc to the modem line gidx
+ */
+struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
+ enum mctrl_gpio_idx gidx);
+
+/*
+ * Request and set direction of modem control lines GPIOs.
+ * devm_* functions are used, so there's no need to call mctrl_gpio_free().
+ * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on
+ * allocation error.
+ */
+struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx);
+
+/*
+ * Free the mctrl_gpios structure.
+ * Normally, this function will not be called, as the GPIOs will
+ * be disposed of by the resource management code.
+ */
+void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios);
+
+#else /* GPIOLIB */
+
+static inline
+void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
+{
+}
+
+static inline
+unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
+{
+ return *mctrl;
+}
+
+static inline
+struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
+ enum mctrl_gpio_idx gidx)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline
+struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline
+void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
+{
+}
+
+#endif /* GPIOLIB */
+
+#endif
--
1.8.5.5
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 4/5] tty/serial: at91: use mctrl_gpio helpers
2014-04-25 14:52 [PATCH 0/5] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c Richard Genoud
` (2 preceding siblings ...)
2014-04-25 14:52 ` [PATCH 3/5] tty/serial: Add GPIOLIB helpers for controlling modem lines Richard Genoud
@ 2014-04-25 14:52 ` Richard Genoud
2014-04-25 14:52 ` [PATCH 5/5] tty/serial: at91: add interrupts for modem control lines Richard Genoud
2014-04-25 15:58 ` [PATCH 0/5] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c Greg Kroah-Hartman
5 siblings, 0 replies; 11+ messages in thread
From: Richard Genoud @ 2014-04-25 14:52 UTC (permalink / raw)
To: linux-arm-kernel
On sam9x5, dedicated CTS (and RTS) pins are unusable together with the
LCDC, the EMAC, or the MMC because they share the same line.
Moreover, the USART controller doesn't handle DTR/DSR/DCD/RI signals,
so we have to control them via GPIO.
This patch permits to use GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI
signals.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
.../devicetree/bindings/serial/atmel-usart.txt | 10 +-
arch/arm/mach-at91/at91rm9200_devices.c | 16 ++--
arch/arm/mach-at91/at91sam9260_devices.c | 7 --
arch/arm/mach-at91/at91sam9261_devices.c | 4 -
arch/arm/mach-at91/at91sam9263_devices.c | 4 -
arch/arm/mach-at91/at91sam9g45_devices.c | 5 -
arch/arm/mach-at91/at91sam9rl_devices.c | 5 -
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/atmel_serial.c | 105 ++++++++++++++-------
include/linux/platform_data/atmel.h | 1 -
10 files changed, 89 insertions(+), 69 deletions(-)
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index 2f7aad71b3c9..a6391e70a8fd 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -13,8 +13,9 @@ Required properties:
Optional properties:
- atmel,use-dma-rx: use of PDC or DMA for receiving data
- atmel,use-dma-tx: use of PDC or DMA for transmitting data
-- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral
- function pin for the USART RTS feature. If unsure, don't specify this property.
+- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
+ It will use specified PIO instead of the peripheral function pin for the USART feature.
+ If unsure, don't specify this property.
- add dma bindings for dma transfer:
- dmas: DMA specifier, consisting of a phandle to DMA controller node,
memory peripheral interface and USART DMA channel ID, FIFO configuration.
@@ -36,6 +37,11 @@ Example:
atmel,use-dma-rx;
atmel,use-dma-tx;
rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
};
- use DMA:
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index f3f19f21352a..291a90a5b1d4 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -15,6 +15,7 @@
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -923,7 +924,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -962,7 +962,14 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
+};
+
+static struct gpiod_lookup_table uart0_gpios_table = {
+ .dev_id = "atmel_usart",
+ .table = {
+ GPIO_LOOKUP("pioA", 21, "rts", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -993,7 +1000,7 @@ static inline void configure_usart0_pins(unsigned pins)
* We need to drive the pin manually. The serial driver will driver
* this to high when initializing.
*/
- uart0_data.rts_gpio = AT91_PIN_PA21;
+ gpiod_add_lookup_table(&uart0_gpios_table);
}
}
@@ -1013,7 +1020,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1065,7 +1071,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1109,7 +1114,6 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 8b1b0a870025..2d179f82aef8 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -820,7 +820,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -859,7 +858,6 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -911,7 +909,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -955,7 +952,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -999,7 +995,6 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
@@ -1043,7 +1038,6 @@ static struct resource uart4_resources[] = {
static struct atmel_uart_data uart4_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart4_dmamask = DMA_BIT_MASK(32);
@@ -1082,7 +1076,6 @@ static struct resource uart5_resources[] = {
static struct atmel_uart_data uart5_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart5_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 80e35895d28f..b5f7a7226ff8 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -881,7 +881,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -920,7 +919,6 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -964,7 +962,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1008,7 +1005,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 43d53d6156dd..39803c3296b2 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1325,7 +1325,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -1364,7 +1363,6 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1408,7 +1406,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1452,7 +1449,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 77b04c2edd78..4e53d8d9737b 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1588,7 +1588,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -1627,7 +1626,6 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1671,7 +1669,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1715,7 +1712,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1759,7 +1755,6 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 428fc412aaf1..f75985062913 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -957,7 +957,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -996,7 +995,6 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1048,7 +1046,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1092,7 +1089,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1136,7 +1132,6 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 95afd310d18e..6e748dceaae3 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -97,6 +97,7 @@ config SERIAL_ATMEL
bool "AT91 / AT32 on-chip serial port support"
depends on ARCH_AT91 || AVR32
select SERIAL_CORE
+ select SERIAL_MCTRL_GPIO
help
This enables the driver for the on-chip UARTs of the Atmel
AT91 and AT32 processors.
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 53eeea13ff16..43ca659c1d4b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -43,6 +43,8 @@
#include <linux/platform_data/atmel.h>
#include <linux/timer.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/err.h>
#include <asm/io.h>
#include <asm/ioctls.h>
@@ -57,6 +59,8 @@
#include <linux/serial_core.h>
+#include "serial_mctrl_gpio.h"
+
static void atmel_start_rx(struct uart_port *port);
static void atmel_stop_rx(struct uart_port *port);
@@ -162,7 +166,7 @@ struct atmel_uart_port {
struct circ_buf rx_ring;
struct serial_rs485 rs485; /* rs485 settings */
- int rts_gpio; /* optional RTS GPIO */
+ struct mctrl_gpios *gpios;
unsigned int tx_done_mask;
bool is_usart; /* usart or uart */
struct timer_list uart_timer; /* uart timer */
@@ -237,6 +241,50 @@ static bool atmel_use_dma_rx(struct uart_port *port)
return atmel_port->use_dma_rx;
}
+static unsigned int atmel_get_lines_status(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int status, ret = 0;
+
+ status = UART_GET_CSR(port);
+
+ mctrl_gpio_get(atmel_port->gpios, &ret);
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_CTS))) {
+ if (ret & TIOCM_CTS)
+ status &= ~ATMEL_US_CTS;
+ else
+ status |= ATMEL_US_CTS;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_DSR))) {
+ if (ret & TIOCM_DSR)
+ status &= ~ATMEL_US_DSR;
+ else
+ status |= ATMEL_US_DSR;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_RI))) {
+ if (ret & TIOCM_RI)
+ status &= ~ATMEL_US_RI;
+ else
+ status |= ATMEL_US_RI;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_DCD))) {
+ if (ret & TIOCM_CD)
+ status &= ~ATMEL_US_DCD;
+ else
+ status |= ATMEL_US_DCD;
+ }
+
+ return status;
+}
+
/* Enable or disable the rs485 support */
void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
{
@@ -296,17 +344,6 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
unsigned int mode;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- /*
- * AT91RM9200 Errata #39: RTS0 is not internally connected
- * to PA21. We need to drive the pin as a GPIO.
- */
- if (gpio_is_valid(atmel_port->rts_gpio)) {
- if (mctrl & TIOCM_RTS)
- gpio_set_value(atmel_port->rts_gpio, 0);
- else
- gpio_set_value(atmel_port->rts_gpio, 1);
- }
-
if (mctrl & TIOCM_RTS)
control |= ATMEL_US_RTSEN;
else
@@ -319,6 +356,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
UART_PUT_CR(port, control);
+ mctrl_gpio_set(atmel_port->gpios, mctrl);
+
/* Local loopback mode? */
mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE;
if (mctrl & TIOCM_LOOP)
@@ -346,7 +385,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
*/
static u_int atmel_get_mctrl(struct uart_port *port)
{
- unsigned int status, ret = 0;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int ret = 0, status;
status = UART_GET_CSR(port);
@@ -362,7 +402,7 @@ static u_int atmel_get_mctrl(struct uart_port *port)
if (!(status & ATMEL_US_RI))
ret |= TIOCM_RI;
- return ret;
+ return mctrl_gpio_get(atmel_port->gpios, &ret);
}
/*
@@ -1042,7 +1082,7 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
unsigned int status, pending, pass_counter = 0;
do {
- status = UART_GET_CSR(port);
+ status = atmel_get_lines_status(port);
pending = status & UART_GET_IMR(port);
if (!pending)
break;
@@ -1568,7 +1608,7 @@ static int atmel_startup(struct uart_port *port)
}
/* Save current CSR for comparison in atmel_tasklet_func() */
- atmel_port->irq_status_prev = UART_GET_CSR(port);
+ atmel_port->irq_status_prev = atmel_get_lines_status(port);
atmel_port->irq_status = atmel_port->irq_status_prev;
/*
@@ -2324,6 +2364,15 @@ static int atmel_serial_resume(struct platform_device *pdev)
#define atmel_serial_resume NULL
#endif
+static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev)
+{
+ p->gpios = mctrl_gpio_init(dev, 0);
+ if (IS_ERR_OR_NULL(p->gpios))
+ return -1;
+
+ return 0;
+}
+
static int atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
@@ -2359,25 +2408,11 @@ static int atmel_serial_probe(struct platform_device *pdev)
port = &atmel_ports[ret];
port->backup_imr = 0;
port->uart.line = ret;
- port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */
- if (pdata)
- port->rts_gpio = pdata->rts_gpio;
- else if (np)
- port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0);
-
- if (gpio_is_valid(port->rts_gpio)) {
- ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS");
- if (ret) {
- dev_err(&pdev->dev, "error requesting RTS GPIO\n");
- goto err;
- }
- /* Default to 1 as RTS is active low */
- ret = gpio_direction_output(port->rts_gpio, 1);
- if (ret) {
- dev_err(&pdev->dev, "error setting up RTS GPIO\n");
- goto err;
- }
- }
+
+ ret = atmel_init_gpios(port, &pdev->dev);
+ if (ret < 0)
+ dev_err(&pdev->dev, "%s",
+ "Failed to initialize GPIOs. The serial port may not work as expected");
ret = atmel_init_port(port, pdev);
if (ret)
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index e26b0c14edea..cea9f70133c5 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -84,7 +84,6 @@ struct atmel_uart_data {
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virt. base address, if any */
struct serial_rs485 rs485; /* rs485 settings */
- int rts_gpio; /* optional RTS GPIO */
};
/* Touchscreen Controller */
--
1.8.5.5
^ permalink raw reply related [flat|nested] 11+ messages in thread