From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.belloni@free-electrons.com (Alexandre Belloni) Date: Fri, 25 Apr 2014 22:00:24 +0200 Subject: [RFC 5/5] ARM: berlin/dt: add support for the clock group to BG2Q In-Reply-To: <1398456024-27876-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1398456024-27876-1-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <1398456024-27876-7-git-send-email-alexandre.belloni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Use the newly added marvell,berlin2-clkgrp driver, add real support for cfgclk and add the nfcecc clock. Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/berlin2q.dtsi | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 559819b89ea1..169c783ef262 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -53,12 +53,6 @@ clock-frequency = <25000000>; }; - cfgclk: config-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - twdclk: twdclk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -191,6 +185,24 @@ reg = <0xea0030 0x8>; }; + grpclk: grpclk at ea00ec { + compatible = "marvell,berlin2-clkgrp"; + clocks = <&syspll>; + reg = <0xea00f8 0x4>, <0xea00ec 0xc>; + + cfgclk: cfgclk { + #clock-cells = <0>; + marvell,clk-switch-offset = <9>; + marvell,clk-select-offset = <12>; + }; + + nfceccclk: nfceccclk { + #clock-cells = <0>; + marvell,clk-switch-offset = <27>; + marvell,clk-select-offset = <50>; + }; + }; + sdio0xinclk: sdio0xinclk at ea0158 { compatible = "marvell,berlin-clk"; clocks = <&syspll>; -- 1.9.1