From mboxrd@z Thu Jan 1 00:00:00 1970 From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth) Date: Wed, 30 Apr 2014 14:56:28 +0200 Subject: [PATCH 01/15] ARM: dts: kirkwood: fix mislocated pcie-controller nodes In-Reply-To: <1398862602-29595-1-git-send-email-sebastian.hesselbarth@gmail.com> References: <1398862602-29595-1-git-send-email-sebastian.hesselbarth@gmail.com> Message-ID: <1398862602-29595-2-git-send-email-sebastian.hesselbarth@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Commit 54397d85349f ("ARM: kirkwood: Relocate PCIe device tree nodes") moved the pcie-controller nodes for the Kirkwood SoCs to the mbus bus node. For some reason, two boards were not properly converted and have their pci-controller nodes still in the ocp bus node. As the corresponding SoC pcie-controller does not exist anymore, it is likely that pcie is broken on those boards since above commit. Fix it by moving the pcie related nodes to the correct location. Signed-off-by: Sebastian Hesselbarth --- Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Russell King Cc: Jason Cooper Cc: Andrew Lunn Cc: Gregory Clement Cc: Thomas Petazzoni Cc: devicetree at vger.kernel.org Cc: linux-arm-kernel at lists.infradead.org Cc: linux-kernel at vger.kernel.org --- arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 18 ++++++++++-------- arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi | 18 ++++++++++-------- 2 files changed, 20 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 2cb0dc529165..4bf358c28be2 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -30,6 +30,16 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + mbus { + pcie-controller { + status = "okay"; + + pcie at 1,0 { + status = "okay"; + }; + }; + }; + ocp at f1000000 { pinctrl at 10000 { pmx_usb_led: pmx-usb-led { @@ -73,14 +83,6 @@ ehci at 50000 { status = "okay"; }; - - pcie-controller { - status = "okay"; - - pcie at 1,0 { - status = "okay"; - }; - }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi index 843b8b561e5e..b88810df7ca2 100644 --- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi @@ -4,6 +4,16 @@ / { model = "ZyXEL NSA310"; + mbus { + pcie-controller { + status = "okay"; + + pcie at 1,0 { + status = "okay"; + }; + }; + }; + ocp at f1000000 { pinctrl: pinctrl at 10000 { @@ -51,14 +61,6 @@ status = "okay"; nr-ports = <2>; }; - - pcie-controller { - status = "okay"; - - pcie at 1,0 { - status = "okay"; - }; - }; }; gpio_poweroff { -- 1.9.1