linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: george.cherian@ti.com (George Cherian)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/6] drivers: net: cpsw: Enable Annexe F Time sync
Date: Fri, 2 May 2014 12:02:02 +0530	[thread overview]
Message-ID: <1399012324-20737-5-git-send-email-george.cherian@ti.com> (raw)
In-Reply-To: <1399012324-20737-1-git-send-email-george.cherian@ti.com>

Enable the Annex F Time Sync explicitly for DRA7x and AM4372.
With this enabled the L2 PTP is working.

while at that rename TS_BIT8 to TS_TTL_NONZERO

Signed-off-by: George Cherian <george.cherian@ti.com>
---
 drivers/net/ethernet/ti/cpsw.c | 49 +++++++++++++++++++++++++++++++-----------
 1 file changed, 37 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 085ffb5..d14c8da 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -248,20 +248,31 @@ struct cpsw_ss_regs {
 #define TS_131              (1<<11) /* Time Sync Dest IP Addr 131 enable */
 #define TS_130              (1<<10) /* Time Sync Dest IP Addr 130 enable */
 #define TS_129              (1<<9)  /* Time Sync Dest IP Addr 129 enable */
-#define TS_BIT8             (1<<8)  /* ts_ttl_nonzero? */
+#define TS_TTL_NONZERO      (1<<8)  /* Time Sync Time To Live Non-zero enable */
+#define TS_ANNEX_F_EN       (1<<6)  /* Time Sync Annex F enable */
 #define TS_ANNEX_D_EN       (1<<4)  /* Time Sync Annex D enable */
 #define TS_LTYPE2_EN        (1<<3)  /* Time Sync LTYPE 2 enable */
 #define TS_LTYPE1_EN        (1<<2)  /* Time Sync LTYPE 1 enable */
 #define TS_TX_EN            (1<<1)  /* Time Sync Transmit Enable */
 #define TS_RX_EN            (1<<0)  /* Time Sync Receive Enable */
 
-#define CTRL_TS_BITS \
-	(TS_320 | TS_319 | TS_132 | TS_131 | TS_130 | TS_129 | TS_BIT8 | \
-	 TS_ANNEX_D_EN | TS_LTYPE1_EN)
+#define CTRL_V2_TS_BITS \
+	(TS_320 | TS_319 | TS_132 | TS_131 | TS_130 | TS_129 |\
+	 TS_TTL_NONZERO  | TS_ANNEX_D_EN | TS_LTYPE1_EN)
 
-#define CTRL_ALL_TS_MASK (CTRL_TS_BITS | TS_TX_EN | TS_RX_EN)
-#define CTRL_TX_TS_BITS  (CTRL_TS_BITS | TS_TX_EN)
-#define CTRL_RX_TS_BITS  (CTRL_TS_BITS | TS_RX_EN)
+#define CTRL_V2_ALL_TS_MASK (CTRL_V2_TS_BITS | TS_TX_EN | TS_RX_EN)
+#define CTRL_V2_TX_TS_BITS  (CTRL_V2_TS_BITS | TS_TX_EN)
+#define CTRL_V2_RX_TS_BITS  (CTRL_V2_TS_BITS | TS_RX_EN)
+
+
+#define CTRL_V3_TS_BITS \
+	(TS_320 | TS_319 | TS_132 | TS_131 | TS_130 | TS_129 |\
+	 TS_TTL_NONZERO | TS_ANNEX_F_EN | TS_ANNEX_D_EN |\
+	 TS_LTYPE1_EN)
+
+#define CTRL_V3_ALL_TS_MASK (CTRL_V3_TS_BITS | TS_TX_EN | TS_RX_EN)
+#define CTRL_V3_TX_TS_BITS  (CTRL_V3_TS_BITS | TS_TX_EN)
+#define CTRL_V3_RX_TS_BITS  (CTRL_V3_TS_BITS | TS_RX_EN)
 
 /* Bit definitions for the CPSW2_TS_SEQ_MTYPE register */
 #define TS_SEQ_ID_OFFSET_SHIFT   (16)    /* Time Sync Sequence ID Offset */
@@ -1376,13 +1387,27 @@ static void cpsw_hwtstamp_v2(struct cpsw_priv *priv)
 		slave = &priv->slaves[priv->data.active_slave];
 
 	ctrl = slave_read(slave, CPSW2_CONTROL);
-	ctrl &= ~CTRL_ALL_TS_MASK;
+	switch (priv->version) {
+	case CPSW_VERSION_2:
+		ctrl &= ~CTRL_V2_ALL_TS_MASK;
 
-	if (priv->cpts->tx_enable)
-		ctrl |= CTRL_TX_TS_BITS;
+		if (priv->cpts->tx_enable)
+			ctrl |= CTRL_V2_TX_TS_BITS;
 
-	if (priv->cpts->rx_enable)
-		ctrl |= CTRL_RX_TS_BITS;
+		if (priv->cpts->rx_enable)
+			ctrl |= CTRL_V2_RX_TS_BITS;
+	break;
+	case CPSW_VERSION_3:
+	default:
+		ctrl &= ~CTRL_V3_ALL_TS_MASK;
+
+		if (priv->cpts->tx_enable)
+			ctrl |= CTRL_V3_TX_TS_BITS;
+
+		if (priv->cpts->rx_enable)
+			ctrl |= CTRL_V3_RX_TS_BITS;
+	break;
+	}
 
 	mtype = (30 << TS_SEQ_ID_OFFSET_SHIFT) | EVENT_MSG_BITS;
 
-- 
1.8.3.1

  parent reply	other threads:[~2014-05-02  6:32 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-02  6:31 [PATCH v2 0/6] Add CPTS support for AM437x George Cherian
2014-05-02  6:31 ` [PATCH v2 1/6] ARM: dts: am33xx: Add clock names for cpsw and cpts George Cherian
2014-05-02  6:32 ` [PATCH v2 2/6] drivers: net: cpts: Remove hardcoded clock name for CPTS George Cherian
2014-05-02  6:32 ` [PATCH v2 3/6] drivers: net: cpsw: Enable CPTS for DRA7xx and AM4372 George Cherian
2014-05-02  6:32 ` George Cherian [this message]
2014-05-02  6:32 ` [PATCH v2 5/6] ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clk George Cherian
2014-05-05 12:22   ` Tero Kristo
2014-05-02  6:32 ` [PATCH v2 6/6] ARM: dts: am4372: Add clock names for cpsw and cpts George Cherian
2014-05-04 16:24 ` [PATCH v2 0/6] Add CPTS support for AM437x Richard Cochran
2014-05-05 14:22 ` Mugunthan V N
2014-05-05 17:19 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1399012324-20737-5-git-send-email-george.cherian@ti.com \
    --to=george.cherian@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).