linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 06/15] ARM: dts: sun4i: Enable mmc controller on various A10 boards
Date: Fri,  2 May 2014 17:57:20 +0200	[thread overview]
Message-ID: <1399046249-19472-7-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1399046249-19472-1-git-send-email-hdegoede@redhat.com>

Tested on a subset of these boards, for the others boards the settings match
the ones of the tested boards according to the original firmware fex files.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/sun4i-a10-a1000.dts          | 9 +++++++++
 arch/arm/boot/dts/sun4i-a10-cubieboard.dts     | 9 +++++++++
 arch/arm/boot/dts/sun4i-a10-hackberry.dts      | 9 +++++++++
 arch/arm/boot/dts/sun4i-a10-inet97fv2.dts      | 9 +++++++++
 arch/arm/boot/dts/sun4i-a10-mini-xplus.dts     | 9 +++++++++
 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 9 +++++++++
 arch/arm/boot/dts/sun4i-a10-pcduino.dts        | 9 +++++++++
 7 files changed, 63 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index fa746aea..93af306 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -36,6 +36,15 @@
 			};
 		};
 
+		mmc0: mmc at 01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
 		usbphy: phy at 01c13400 {
 			usb1_vbus-supply = <&reg_usb1_vbus>;
 			usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 4684cbe..8581385 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -34,6 +34,15 @@
 			};
 		};
 
+		mmc0: mmc at 01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
 		usbphy: phy at 01c13400 {
 			usb1_vbus-supply = <&reg_usb1_vbus>;
 			usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index d7c17e4..9dc7b1c 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -36,6 +36,15 @@
 			};
 		};
 
+		mmc0: mmc at 01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
 		usbphy: phy at 01c13400 {
 			usb1_vbus-supply = <&reg_usb1_vbus>;
 			usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index fe9272e..297b8f6 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -24,6 +24,15 @@
 	};
 
 	soc at 01c00000 {
+		mmc0: mmc at 01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
 		uart0: serial at 01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index dd84a9e..b7a4218 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -20,6 +20,15 @@
 	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
 
 	soc at 01c00000 {
+		mmc0: mmc at 01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
 		usbphy: phy at 01c13400 {
 			usb1_vbus-supply = <&reg_usb1_vbus>;
 			usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 66cf0c7..4b7fd04 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -33,6 +33,15 @@
 			};
 		};
 
+		mmc0: mmc at 01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
 		usbphy: phy at 01c13400 {
 			usb1_vbus-supply = <&reg_usb1_vbus>;
 			usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 255b47e..4d9c3cd 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -34,6 +34,15 @@
 			};
 		};
 
+		mmc0: mmc at 01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
 		usbphy: phy at 01c13400 {
 			usb1_vbus-supply = <&reg_usb1_vbus>;
 			usb2_vbus-supply = <&reg_usb2_vbus>;
-- 
1.9.0

  parent reply	other threads:[~2014-05-02 15:57 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-02 15:57 [PATCH v10 00/15] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs Hans de Goede
2014-05-02 15:57 ` [PATCH v10 01/15] clk: sunxi: factors: automatic reparenting support Hans de Goede
2014-05-06 18:51   ` Maxime Ripard
2014-05-06 20:24     ` Emilio López
2014-05-02 15:57 ` [PATCH v10 02/15] clk: sunxi: Implement MMC phase control Hans de Goede
2014-05-06 18:53   ` Maxime Ripard
2014-05-02 15:57 ` [PATCH v10 03/15] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs Hans de Goede
2014-05-05 12:41   ` Ulf Hansson
2014-05-05 13:10     ` Hans de Goede
2014-05-05 20:33       ` Ulf Hansson
2014-05-08 11:26         ` Hans de Goede
2014-05-08 12:17           ` Ulf Hansson
2014-05-08 12:30             ` Hans de Goede
2014-05-08 15:35               ` Maxime Ripard
2014-05-08 16:37                 ` Hans de Goede
2014-05-02 15:57 ` [PATCH v10 04/15] ARM: dts: sun4i: Add mmc controller nodes Hans de Goede
2014-05-02 15:57 ` [PATCH v10 05/15] ARM: dts: sun4i: Add pin-muxing info for the mmc0 controller Hans de Goede
2014-05-02 15:57 ` Hans de Goede [this message]
2014-05-02 15:57 ` [PATCH v10 07/15] ARM: dts: sun5i: Add mmc controller nodes Hans de Goede
2014-05-02 15:57 ` [PATCH v10 08/15] ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boards Hans de Goede
2014-05-02 15:57 ` [PATCH v10 09/15] ARM: dts: sun6i: Add mmc clocks Hans de Goede
2014-05-02 15:57 ` [PATCH v10 10/15] ARM: dts: sun6i: Add mmc controller nodes Hans de Goede
2014-05-02 15:57 ` [PATCH v10 11/15] ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9 Hans de Goede
2014-05-02 15:57 ` [PATCH v10 12/15] ARM: dts: sun7i: Add mmc controller nodes Hans de Goede
2014-05-02 15:57 ` [PATCH v10 13/15] ARM: dts: sun7i: Add pin-muxing info for the mmc controllers Hans de Goede
2014-05-02 15:57 ` [PATCH v10 14/15] ARM: dts: sun7i: Enable mmc controller on various A20 boards Hans de Goede
2014-05-02 15:57 ` [PATCH v10 15/15] ARM: dts: sun7i: Add basic support for the Cubietruck WiFi module Hans de Goede
2014-05-05  4:02   ` Maxime Ripard
2014-05-05  4:20     ` Chen-Yu Tsai
2014-05-05 22:46       ` Maxime Ripard
2014-05-05 22:45   ` Maxime Ripard
2014-05-05  4:00 ` [PATCH v10 00/15] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs Maxime Ripard
2014-05-06 17:04 ` Mike Turquette
2014-05-08 11:05   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1399046249-19472-7-git-send-email-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).